Compiling busybox for ARM-V7

[Vered Zvi]

Hello,

Target: arm-cortex_a15-linux-gnueabihf-gcc

Thank you for your help,
Z.V

________________________________________
From: Kang-Che Sung [explorer09 at gmail.com]
Sent: Friday, January 06, 2017 7:20 AM
To: Vered Zvi
Cc: busybox
Subject: Re: Compiling busybox for ARM-V7

On Fri, Jan 6, 2017 at 12:07 PM, Vered Zvi <veredz at elta.co.il> wrote:
> I compiled busybox 1.25.1 for ARM-V7 using crosstool-ng toolchain.
>
> I used the commands:
>
> TOOLCHAIN=/home/zvivered/module/CARD/linux4.1.13/toolchain
> make clean
> make ARCH=arm CROSS_COMPILE=$TOOLCHAIN/crosstool/release/bin/arm-cortex_a15-linux-gnueabihf- defconfig
> make ARCH=arm CROSS_COMPILE=$TOOLCHAIN/crosstool/release/bin/arm-cortex_a15-linux-gnueabihf-
> make CONFIG_PREFIX=../../../rootfs install
>
> Then I ran:  file busybox
> and got:
> ./busybox: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]=4789168febe33cdab87b3d932c0fdbf8d5c73e30, stripped
> [...]
> Also, the busybox utils are running on my centos (64) machine.
> How is it possible that a utility compiled for ARM is running on an x86 machine ?

Did you ever check your "arm-cortex_a15-linux-gnueabihf-gcc -v" output?
Look at the "Target:" line, what does it write?
The information contained in this communication is proprietary to Israel Aerospace Industries Ltd. and/or third parties, may contain confidential or privileged information, and is intended only for the use of the intended addressee thereof. If you are not the intended addressee, please be aware that any use, disclosure, distribution and/or copying of this communication is strictly prohibited. If you receive this communication in error, please notify the sender immediately and delete it from your computer.