[SOLVED] busybox sh does not run and cannot login when eabi enable d

[Peter Korsgaard]

>>>>> "cytan" == cytan299 at netzero com <cytan299 at netzero.com> writes:

 cytan> Unbelievable: The problem was in uClibc config. FPU must *not* be 
 cytan> Here's the uClibc config snippet:

 cytan> UCLIBC_HAS_FLOATS=y
 cytan> # UCLIBC_HAS_FPU is not set
 cytan> UCLIBC_HAS_SOFT_FLOAT=y

Why is that hard to understand? If you target doesn't have a FPU (and
you don't build your kernel with FPU emulation) things are bound to go
wrong when you configure uClibc to use one.

-- 
Bye, Peter Korsgaard