Telnetd: cannot find free ptys..
Rahanesh
rahanesh at tataelxsi.co.in
Wed Sep 23 13:51:30 UTC 2009
Baruch Siach wrote:
> Hi Rahanesh,
>
> On Wed, Sep 23, 2009 at 06:57:56PM +0530, Rahanesh wrote:
>
>> Maxin John wrote:
>>
>>> Hi Rahanesh,
>>>
>>> On Wed, 23 Sep 2009 17:23:11 +0530 wrote
>>>
>>>> Hi All,I am using busybox-1.12.4 on MIPS target. I want to telnet
>>>>
>> >from >PC toboard.After starting telnetd on board and then while
>>
>>> trying to >connect to itfrom PC i get the following error.
>>>
>>> Execute these commands on the target board:
>>> cd /dev
>>> mkdir pts
>>> mount -t devpts none /dev/pts
>>>
>> I tried to execute the above commad it said
>> " *mounting none on /dev/pts failed: No such device*"
>>
>> What might be the issue?
>>
>
> What is the output of the following command on your board?
>
> grep devpts /proc/filesystems
>
> You should see something like:
>
> nodev devpts
>
No such thing is there.
Since grep is not enabled in my board , i did cat
/proc/filesystems it showed
nodev sysfs
nodev rootfs
nodev bdev
nodev proc
nodev sockfs
nodev pipefs
nodev futexfs
nodev tmpfs
nodev eventpollfs
ext2
cramfs
nodev ramfs
efs
nodev jffs2
the content of /etc/fstab is
<file system> <mount point> <type> <options> <dump> <pass>
/dev/root / ext2 rw,noauto 0 1
proc /proc proc defaults 0 0
none /sys sysfs defaults 0 0
devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
/dev/mtdblock1 /flash jffs2 defaults 0 0
/dev/mtdblock2 /flash1 jffs2 defaults 0 0
none /proc/bus/usb usbfs defaults 0 0
Any idea?
Thanks
Rahanesh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/busybox/attachments/20090923/1614a03d/attachment.htm>
More information about the busybox
mailing list