some help, when you have 5 minutes :-)

[philippe.abrassart at belgacom.be]

Hi Busybox team,


I bought a multimedia Hard disk  (EMTEC Q120) with an ethernet interface, and a USB  interface.
There is a Linux which is embedded in this 'black box'.
Then  I connected the box, trough the ethernet access, to try some commands  (I'm not a linux specialist)
I discovered your site after accessing the shell of this box ...


Overview :
- 2 partitions :
--- the first is a FAT32 one  (HDD1)
--- the second is a NTFS one (HDD2)

see the attach of this mail


My problems :


1) I access this box from two PCs, via the ethernet interface. One PC of my children (XP), the other PC is mine (W2000)
It's impossible to write (or move, or delete, ...) files/folders on the NTFS partition (HDD2) from the PC's.
The only way I can place /move/delete  files on this partition is to connect the box via the USB interface.
It's OK with HDD1 because this is a FAT32 system.

--> Do you think there is a solution to be able to provide more rights, to HDD2 (NTFS), from my PC's via the ethernet access ?


2)  it seems the ethernet interface is working at 10Mbps  (this is slow for a multimedia device) - Do you think if I could force it in 100Mbps


3) May be does-it exist a GUI to access the main config ?



Many thx for your advices and your help.


Best regards,
Philippe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.busybox.net/pipermail/busybox/attachments/20090118/af26f703/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Q120_some displays.pdf
Type: application/pdf
Size: 19543 bytes
Desc: Q120_some displays.pdf
Url : http://lists.busybox.net/pipermail/busybox/attachments/20090118/af26f703/attachment-0001.pdf