-sh: id: not found

[walter harms]

i am confused what you are trying to do.
bb is running ok
but missing id (guess you have to recompile and compile it in)

what means root= ?
you are running a shell so you would set a variable called root.

you may try:

mount /dev/nfs 10.x.x.x:&opt/xup_rootfs -o rw

the other stuff look like kernel commandline and should be present 
before booting. (now the kernel is up, and you have already a shell).

re,
  walter


Prakash N wrote:
> Hi,
>  Iam using Xilinx board and linux-2.4.36 and latest busybox.  While Iam trying to use NFS, I get an error/warning. I could use network utilities (nslookup,ping etc) by having Kernel & RFS in Flash drive.
>   -------------------------------------------------------------------------------------------------------------
>  ML300 powerpc linux 2.4.21-pre7 E.I.S. edition
>   (none) login: root
>   Welcome to the ML300, EIS edition
>   Be careful, it's blue.
>   BusyBox v1.1.2 (2006.04.27-13:49+0000) Built-in shell (ash)
>   Enter 'help' for a list of built-in commands.
>   -sh: id: not found
>   -sh: id: not found
>   # nslookup 10.114.x.xx
>   Server:     203.xxx.xx.xx.ill-bgl.static.vsnl.net.in
>   .
>   .
>   Address:    10.114.x.xx
>   # root=/dev/nfs nfsaddrs=10.114.xx.xxx:10.114.x.xx:10.114.x.xx:255.255.255.0 rw nfsroot=/opt/xup_rootfs console=ttyS0,38400
>   -sh: rw: not found
>    --------------------------------------------------------------------------------------------------------
>   What may be the problem,
>   Prakash
> 				
> ---------------------------------
> Yahoo! India Answers: Share what you know. Learn something new. Click here
> Send instant messages to your online friends - NOW
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> busybox mailing list
> busybox at busybox.net
> http://busybox.net/cgi-bin/mailman/listinfo/busybox