[BusyBox] ifupdown package

[Erik Andersen]

On Wed Jun 25, 2003 at 11:03:35AM +1000, Andrew Dennison wrote:
> I noticed recently that busybox.links is not regenerated if the .config is
> changed and you run make. Therefore busybox.links may not match the busybox
> binary if you add some features and recompile. Thus a make install could
> leave out some links and cause this type of problem.

Good catch.  Fixed now, thanks.

> Maybe Tony has built a busybox with ifup/down support but the links are not
> installed due to the above issue?

Could be....

 -Erik

--
Erik B. Andersen             http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--