[BusyBox] run-parts help text patch

[Eric Spakman]

Hello,

The following patch updates the "run-parts" help text in Config.in, 
long options are supported now.

I also want to report a problem I have with "run-parts" in bb 
ifupdown:
When I want to configure a bridge interface with the external brctl 
utility (bridge.o kernel module loaded), with the following lines in 
/etc/network/interfaces:

iface br0 inet static
        address 192.168.1.254
        netmask 255.255.255.0
        bridge_ports all

The appropiate scripts in if-up.d, if-pre-up.d, if-post-down.d 
(Debian scripts) and the busybox applet "run-parts" installed. 

When I do a "ifup br0" I get the following message:

# ifup br0
ifup: failed to stat component : No such file or directory

This seems to come from the run-parts applet.
Doing the same in "real" ifupdown and a "real" run-parts program, all 
works correct.

I did a lot of searching in the sources, but couldn't find the 
problem. Can someone else look at it?

Regards,
Eric Spakman

-------------- next part --------------
--- ./busybox_old/debianutils/Config.in	Sat Jul 26 11:16:00 2003
+++ ./busybox/debianutils/Config.in	Thu Jul 31 09:52:17 2003
@@ -27,8 +27,8 @@
 	  It is useful to set up a directory like cron.daily, where you need to
 	  execute all the scripts in that directory.
 
-	  This implementation of run-parts does not accept long options, and
-	  some features (such as report mode) are not implemented.
+	  In this implementation of run-parts some features (such as report mode) 
+	  are not implemented.
 
 	  Unless you know that run-parts is used in some of your scripts
 	  you can safely say N here.