[BusyBox] Redirect console to /dev/pts/0

[Matthias Fuchs]

Hi Brett,

you can tell syslogs to use a special log file with the -O option:

	syslogd -O <logfile>

It should be possible to use /dev/pts/x as logfile. Well, as already mentioned you can use syslogd to
do remote logging over the network. Take a look into the docs.

Do not forget tot start klogd before as well.

Matthias

Brett Hunt wrote:

> Matthias (and all),
> 
> K, I actually looked at the bb config this time and saw that syslogd and klogd were available. So I've enabled them at compile time and can turn them on manually when the system starts.
> 
> My question is, do they support a config file? And can I redirect output to a terminal (/dev/pts/0 for example)?
> 
> Thanks,
> Brett
> 
> 
> _______________________________________________
> busybox mailing list
> busybox at busybox.net
> http://busybox.net/mailman/listinfo/busybox
> 
> 
> 


-- 
-------------------------------------------------------------------------

                             _/_/_/_/   Matthias Fuchs
                            _/_/_/_/   Dipl.-Ing.
                           _/_/_/_/   matthias.fuchs at esd-electronics.com

       _/_/_/   _/_/_/_/_/_/_/      esd electronic system design gmbh
     _/   _/  _/             _/    Vahrenwalder Str. 207
    _/   _/    _/_/_/   _/   _/   D-30165 Hannover
    _/             _/  _/   _/   Phone: +49-511-37298-0
     _/_/_/_/_/_/_/   _/_/_/    Fax:   +49-511-37298-68

-------------------------------------------------------------------------