[BusyBox] Building uname...

[Edmund Troche]

Just to veify my hunch, I compiled uname.o with all the flags, but -Os, and
it compiles fine. As soon as you put in any level of optimization, it shows
the error.


Edmund

Thomas Cameron wrote:

> I have done the same.  I have taken uname out.  However, some uf my
> update scripts make use of uname, so it breaks some (small)
> functionality of my system.
>
> ---------------------------------------------
> Thomas Cameron
> CEI Systems
> ---------------------------------------------
> "Everything I know, I learned from Open Source"
>
> -----Original Message-----
> From: Edmund Troche [mailto:edmund at troche.org]
> Sent: Saturday, March 23, 2002 3:39 PM
> To: Thomas Cameron
> Cc: busybox at busybox.net
> Subject: Re: [BusyBox] Building uname...
>
> II had the same exact error. I did the CVS update of Busybox and uClibc
> and compiled Busybox against uClibc. My gcc version is  2.96. The gnu
> assembler version is 2.10.90. I just took uname out of the Busybox
> compile and did not have a chance to look at it in more detail, but it
> sort of smells like the compiler has a bug.
>
> Edmund
>
> Thomas Cameron wrote:
>
> > Hello all,
> >         The error message is as follows:
> >
> > ==========================================
> >
> > /tmp/ccuDDANq.s: Assembler messages:
> > /tmp/ccuDDANq.:110: Error: '%si' not allowed with 'sarb'
> > make[2]: *** [uname.o] Error 1
> > make[1]: *** [first_rule] Error 2
> > make: *** [_dir_shellutils] Error 2
> >
> > ==========================================
> >
> >         Anyway, any help with this is greatly appreciated, as always.
> >
> > -Tom Cameron
> >
> > -----Original Message-----
> > From:   Thomas Cameron
> > Sent:   Fri 3/22/2002 9:51 AM
> > To:     busybox at busybox.net
> > Cc:
> > Subject:        [BusyBox] Building uname...
> >
> > Hello all,
> >         I downloaded the latest snapshot of uClibc and then CVS UP'd
> > it, and downloaded a snapshot of BusyBox and CVS UP'd it just now.  I
> > attempted to build uname, and it failed.  I do not have the exact
> > error message, but will attempt to grab it.  I just wanted to see if
> > anyone else has had this issue.
> >
> > -Tom Cameron
> > _______________________________________________
> > busybox mailing list
> > busybox at busybox.net http://busybox.net/mailman/listinfo/busybox
> >
> >
> ------------------------------------------------------------------------
> >                   Name: winmail.dat
> >    winmail.dat    Type: application/ms-tnef
> >               Encoding: base64
>
> _______________________________________________
> busybox mailing list
> busybox at busybox.net
> http://busybox.net/mailman/listinfo/busybox