[BusyBox] BB Init and rcS script

[Fabrice Gautier]

Hi, more input,

The rcS script is terminated with a signal 11 (SIGSEGV).

The faulty line appears to be:

echo > /etc/mtab

When I remove this line form the script all goes well.
So after that I have the busybox shell and if i try "echo > test"
then the shell exit.

I tried the same thing on my host linux box (a debian unstable)
chrooting on the same filesystem, and I didn't succeded to reproduce the
problem,...

My target has a STPC x86, detected as a Cyrix 486 core by a 2.4 kernel,
while the debian box run a 2.2.18 kernel on a k6-2.

Thanks...


On Mon, 12 Mar 2001 22:59:41 +0100
Fabrice Gautier <gautier at email.enst.fr> wrote:

> Hi,
> 
> I'm using BB init to boot. I'm using an NFS root and a Serial console.
> 
> I don't have /etc/inittab, so /etc/init.d/rcS is used a the startup
> script.
> 
> The beginning of the script run well, but then it appears to be
> interupted and i have the message "Please press Enter to activate this console."
> 
> The script appears to be interrupted in the middle of an echo command 
> (it onyl output an half word)
> 
> If I type enter , i get in the shell and i can verify that the script
> has not finished (/proc is not mounted)
> 
> What's happening?
> 
> Thanks
> -- 
> Fabrice Gautier <gautier at email.enstfr>
> 
> 
> 
> _______________________________________________
> busybox mailing list
> busybox at busybox.net
> http://busybox.net/mailman/listinfo/busybox

-- 
Fabrice Gautier <gautier at email.enstfr>