[git commit] sv: update to match version 2.1.2 of runit
Denys Vlasenko
vda.linux at googlemail.com
Mon May 15 19:40:18 UTC 2017
commit: https://git.busybox.net/busybox/commit/?id=0c63299b84513ff995413f820cb5f3d546c0c5d7
branch: https://git.busybox.net/busybox/commit/?id=refs/heads/master
Backport from upstream versions:
2.1.2
Sun, 10 Aug 2014 18:01:54 +0000
* sv.c: properly format status command's output on failure cases.
* sv.c: support optional LSB init script actions reload and
try-restart.
* sv.c: fix typo that may lead to wrong output from sv when reporting
status of multiple service directories.
2.1.1
Sun, 04 Oct 2009 20:28:38 +0000
* sv.c: on 'down', send runsv the 'down' command properly if not yet
done (e.g. when taken up with 'once').
[Remove previous workaround added to BusyBox version].
1.9.0
Mon, 05 May 2008 22:00:13 +0000
* sv.c: service name is also relative to the current directory if it
ends with a slash.
1.8.0
Fri, 21 Sep 2007 00:33:56 +0000
* sv.c: fix race on check for down if pid is 0 and state is run or
finish.
1.7.1
Sat, 04 Nov 2006 19:23:29 +0000
* sv.c: properly wait for a service to be restarted on 'restart';
support checks through -v for pause, cont, kill.
function old new delta
sv 1184 1280 +96
control 132 180 +48
status 118 139 +21
out 64 85 +21
svstatus_print 334 344 +10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 196/0) Total: 196 bytes
Signed-off-by: James Byrne <james.byrne at origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux at googlemail.com>
---
runit/sv.c | 163 +++++++++++++++++++++++++++++++++++++------------------------
1 file changed, 98 insertions(+), 65 deletions(-)
diff --git a/runit/sv.c b/runit/sv.c
index 64f1ae3..faa31d4 100644
--- a/runit/sv.c
+++ b/runit/sv.c
@@ -25,7 +25,7 @@ OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* Taken from http://smarden.sunsite.dk/runit/sv.8.html:
+/* Taken from http://smarden.org/runit/sv.8.html:
sv - control and manage services monitored by runsv
@@ -36,17 +36,13 @@ The sv program reports the current status and controls the state of services
monitored by the runsv(8) supervisor.
services consists of one or more arguments, each argument naming a directory
-service used by runsv(8). If service doesn't start with a dot or slash,
-it is searched in the default services directory /var/service/, otherwise
-relative to the current directory.
+service used by runsv(8). If service doesn't start with a dot or slash and
+doesn't end with a slash, it is searched in the default services directory
+/var/service/, otherwise relative to the current directory.
command is one of up, down, status, once, pause, cont, hup, alarm, interrupt,
-1, 2, term, kill, or exit, or start, stop, restart, shutdown, force-stop,
-force-reload, force-restart, force-shutdown.
-
-The sv program can be sym-linked to /etc/init.d/ to provide an LSB init
-script interface. The service to be controlled then is specified by the
-base name of the "init script".
+1, 2, term, kill, or exit, or start, stop, reload, restart, shutdown,
+force-stop, force-reload, force-restart, force-shutdown, try-restart.
status
Report the current status of the service, and the appendant log service
@@ -66,9 +62,9 @@ exit
If the service is running, send it the TERM signal, and the CONT signal.
Do not restart the service. If the service is down, and no log service
exists, runsv(8) exits. If the service is down and a log service exists,
- send the TERM signal to the log service. If the log service is down,
- runsv(8) exits. This command is ignored if it is given to an appendant
- log service.
+ runsv(8) closes the standard input of the log service and waits for it to
+ terminate. If the log service is down, runsv(8) exits. This command is
+ ignored if it is given to an appendant log service.
sv actually looks only at the first character of above commands.
@@ -85,6 +81,8 @@ start
stop
Same as down, but wait up to 7 seconds for the service to become down.
Then report the status or timeout.
+reload
+ Same as hup, and additionally report the status afterwards.
restart
Send the commands term, cont, and up to the service, and wait up to
7 seconds for the service to restart. Then report the status or timeout.
@@ -112,6 +110,9 @@ force-shutdown
Same as exit, but wait up to 7 seconds for the runsv(8) process to
terminate. Then report the status, and on timeout send the service
the kill command.
+try-restart
+ if the service is running, send it the term and cont commands, and wait up to
+ 7 seconds for the service to restart. Then report the status or timeout.
Additional Commands
@@ -126,8 +127,8 @@ check
Options
-v
- wait up to 7 seconds for the command to take effect.
- Then report the status or timeout.
+ If the command is up, down, term, once, cont, or exit, then wait up to 7
+ seconds for the command to take effect. Then report the status or timeout.
-w sec
Override the default timeout of 7 seconds with sec seconds. Implies -v.
@@ -192,6 +193,7 @@ struct globals {
/* "Bernstein" time format: unix + 0x400000000000000aULL */
uint64_t tstart, tnow;
svstatus_t svstatus;
+ unsigned islog;
} FIX_ALIASING;
#define G (*(struct globals*)bb_common_bufsiz1)
#define acts (G.acts )
@@ -200,6 +202,7 @@ struct globals {
#define tstart (G.tstart )
#define tnow (G.tnow )
#define svstatus (G.svstatus )
+#define islog (G.islog )
#define INIT_G() do { setup_common_bufsiz(); } while (0)
@@ -215,7 +218,7 @@ static void fatal_cannot(const char *m1)
static void out(const char *p, const char *m1)
{
- printf("%s%s: %s", p, *service, m1);
+ printf("%s%s%s: %s", p, *service, islog ? "/log" : "", m1);
if (errno) {
printf(": %s", strerror(errno));
}
@@ -300,15 +303,14 @@ static unsigned svstatus_print(const char *m)
}
pid = SWAP_LE32(svstatus.pid_le32);
timestamp = SWAP_BE64(svstatus.time_be64);
- if (pid) {
- switch (svstatus.run_or_finish) {
+ switch (svstatus.run_or_finish) {
+ case 0: printf("down: "); break;
case 1: printf("run: "); break;
case 2: printf("finish: "); break;
- }
- printf("%s: (pid %d) ", m, pid);
- } else {
- printf("down: %s: ", m);
}
+ printf("%s: ", m);
+ if (svstatus.run_or_finish)
+ printf("(pid %d) ", pid);
diff = tnow - timestamp;
printf("%us", (diff < 0 ? 0 : diff));
if (pid) {
@@ -331,16 +333,21 @@ static int status(const char *unused UNUSED_PARAM)
return 0;
r = svstatus_print(*service);
+ islog = 1;
if (chdir("log") == -1) {
if (errno != ENOENT) {
- printf("; log: "WARN"can't change to log service directory: %s",
- strerror(errno));
- }
- } else if (svstatus_get()) {
+ printf("; ");
+ warn("can't change directory");
+ } else
+ bb_putchar('\n');
+ } else {
printf("; ");
- svstatus_print("log");
+ if (svstatus_get()) {
+ r = svstatus_print("log");
+ bb_putchar('\n');
+ }
}
- bb_putchar('\n'); /* will also flush the output */
+ islog = 0;
return r;
}
@@ -379,35 +386,53 @@ static int check(const char *a)
r = svstatus_get();
if (r == -1)
return -1;
- if (r == 0) {
- if (*a == 'x')
- return 1;
- return -1;
- }
- pid_le32 = svstatus.pid_le32;
- switch (*a) {
- case 'x':
- return 0;
- case 'u':
- if (!pid_le32 || svstatus.run_or_finish != 1) return 0;
- if (!checkscript()) return 0;
- break;
- case 'd':
- if (pid_le32) return 0;
- break;
- case 'c':
- if (pid_le32 && !checkscript()) return 0;
- break;
- case 't':
- if (!pid_le32 && svstatus.want == 'd') break;
- timestamp = SWAP_BE64(svstatus.time_be64);
- if ((tstart > timestamp) || !pid_le32 || svstatus.got_term || !checkscript())
- return 0;
- break;
- case 'o':
- timestamp = SWAP_BE64(svstatus.time_be64);
- if ((!pid_le32 && tstart > timestamp) || (pid_le32 && svstatus.want != 'd'))
+ while (*a) {
+ if (r == 0) {
+ if (*a == 'x')
+ return 1;
+ return -1;
+ }
+ pid_le32 = svstatus.pid_le32;
+ switch (*a) {
+ case 'x':
return 0;
+ case 'u':
+ if (!pid_le32 || svstatus.run_or_finish != 1)
+ return 0;
+ if (!checkscript())
+ return 0;
+ break;
+ case 'd':
+ if (pid_le32 || svstatus.run_or_finish != 0)
+ return 0;
+ break;
+ case 'C':
+ if (pid_le32 && !checkscript())
+ return 0;
+ break;
+ case 't':
+ case 'k':
+ if (!pid_le32 && svstatus.want == 'd')
+ break;
+ timestamp = SWAP_BE64(svstatus.time_be64);
+ if ((tstart > timestamp) || !pid_le32 || svstatus.got_term || !checkscript())
+ return 0;
+ break;
+ case 'o':
+ timestamp = SWAP_BE64(svstatus.time_be64);
+ if ((!pid_le32 && tstart > timestamp) || (pid_le32 && svstatus.want != 'd'))
+ return 0;
+ break;
+ case 'p':
+ if (pid_le32 && !svstatus.paused)
+ return 0;
+ break;
+ case 'c':
+ if (pid_le32 && svstatus.paused)
+ return 0;
+ break;
+ }
+ ++a;
}
printf(OK);
svstatus_print(*service);
@@ -419,14 +444,10 @@ static int control(const char *a)
{
int fd, r, l;
-/* Is it an optimization?
- It causes problems with "sv o SRV; ...; sv d SRV"
- ('d' is not passed to SRV because its .want == 'd'):
if (svstatus_get() <= 0)
return -1;
- if (svstatus.want == *a)
+ if (svstatus.want == *a && (*a != 'd' || svstatus.got_term == 1))
return 0;
-*/
fd = open("supervise/control", O_WRONLY|O_NDELAY);
if (fd == -1) {
if (errno != ENODEV)
@@ -516,17 +537,23 @@ static int sv(char **argv)
acts = "tc";
kll = 1;
break;
+ case 't':
+ if (str_equal(action, "try-restart")) {
+ acts = "tc";
+ break;
+ }
case 'c':
if (str_equal(action, "check")) {
act = NULL;
- acts = "c";
+ acts = "C";
break;
}
- case 'u': case 'd': case 'o': case 't': case 'p': case 'h':
+ case 'u': case 'd': case 'o': case 'p': case 'h':
case 'a': case 'i': case 'k': case 'q': case '1': case '2':
action[1] = '\0';
acts = action;
- if (!verbose) cbk = NULL;
+ if (!verbose)
+ cbk = NULL;
break;
case 's':
if (str_equal(action, "shutdown")) {
@@ -550,6 +577,10 @@ static int sv(char **argv)
acts = "tcu";
break;
}
+ if (str_equal(action, "reload")) {
+ acts = "h";
+ break;
+ }
bb_show_usage();
case 'f':
if (str_equal(action, "force-reload")) {
@@ -578,7 +609,9 @@ static int sv(char **argv)
service = argv;
while ((x = *service) != NULL) {
- if (x[0] != '/' && x[0] != '.') {
+ if (x[0] != '/' && x[0] != '.'
+ && x[0] != '\0' && x[strlen(x) - 1] != '/'
+ ) {
if (chdir(varservice) == -1)
goto chdir_failed_0;
}
More information about the busybox-cvs
mailing list