[git commit] deleting unused ntpd_simple.c

Denys Vlasenko vda.linux at googlemail.com
Mon Jan 5 14:12:37 UTC 2015


commit: http://git.busybox.net/busybox/commit/?id=08b90a9d10f2f712c6e16c118328d85930762b92
branch: http://git.busybox.net/busybox/commit/?id=refs/heads/master

Signed-off-by: Denys Vlasenko <vda.linux at googlemail.com>
---
 networking/ntpd_simple.c | 1005 ----------------------------------------------
 1 files changed, 0 insertions(+), 1005 deletions(-)

diff --git a/networking/ntpd_simple.c b/networking/ntpd_simple.c
deleted file mode 100644
index 2cfbd55..0000000
--- a/networking/ntpd_simple.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * NTP client/server, based on OpenNTPD 3.9p1
- *
- * Author: Adam Tkac <vonsch at gmail.com>
- *
- * Licensed under GPLv2, see file LICENSE in this source tree.
- */
-#include "libbb.h"
-#include <netinet/ip.h> /* For IPTOS_LOWDELAY definition */
-#include <sys/resource.h> /* setpriority */
-#ifndef IPTOS_LOWDELAY
-# define IPTOS_LOWDELAY 0x10
-#endif
-
-
-/* Sync to peers every N secs */
-#define INTERVAL_QUERY_NORMAL    30
-#define INTERVAL_QUERY_PATHETIC  60
-#define INTERVAL_QUERY_AGRESSIVE  5
-
-/* Bad if *less than* TRUSTLEVEL_BADPEER */
-#define TRUSTLEVEL_BADPEER        6
-#define TRUSTLEVEL_PATHETIC       2
-#define TRUSTLEVEL_AGRESSIVE      8
-#define TRUSTLEVEL_MAX           10
-
-#define QSCALE_OFF_MIN         0.05
-#define QSCALE_OFF_MAX         0.50
-
-/* Single query might take N secs max */
-#define QUERYTIME_MAX            15
-/* Min offset for settime at start. "man ntpd" says it's 128 ms */
-#define STEPTIME_MIN_OFFSET   0.128
-
-typedef struct {
-	uint32_t int_partl;
-	uint32_t fractionl;
-} l_fixedpt_t;
-
-typedef struct {
-	uint16_t int_parts;
-	uint16_t fractions;
-} s_fixedpt_t;
-
-enum {
-	NTP_DIGESTSIZE     = 16,
-	NTP_MSGSIZE_NOAUTH = 48,
-	NTP_MSGSIZE        = (NTP_MSGSIZE_NOAUTH + 4 + NTP_DIGESTSIZE),
-};
-
-typedef struct {
-	uint8_t     m_status;     /* status of local clock and leap info */
-	uint8_t     m_stratum;    /* stratum level */
-	uint8_t     m_ppoll;      /* poll value */
-	int8_t      m_precision_exp;
-	s_fixedpt_t m_rootdelay;
-	s_fixedpt_t m_dispersion;
-	uint32_t    m_refid;
-	l_fixedpt_t m_reftime;
-	l_fixedpt_t m_orgtime;
-	l_fixedpt_t m_rectime;
-	l_fixedpt_t m_xmttime;
-	uint32_t    m_keyid;
-	uint8_t     m_digest[NTP_DIGESTSIZE];
-} msg_t;
-
-enum {
-	NTP_VERSION     = 4,
-	NTP_MAXSTRATUM  = 15,
-
-	/* Status Masks */
-	MODE_MASK       = (7 << 0),
-	VERSION_MASK    = (7 << 3),
-	VERSION_SHIFT   = 3,
-	LI_MASK         = (3 << 6),
-
-	/* Leap Second Codes (high order two bits of m_status) */
-	LI_NOWARNING    = (0 << 6),    /* no warning */
-	LI_PLUSSEC      = (1 << 6),    /* add a second (61 seconds) */
-	LI_MINUSSEC     = (2 << 6),    /* minus a second (59 seconds) */
-	LI_ALARM        = (3 << 6),    /* alarm condition */
-
-	/* Mode values */
-	MODE_RES0       = 0,    /* reserved */
-	MODE_SYM_ACT    = 1,    /* symmetric active */
-	MODE_SYM_PAS    = 2,    /* symmetric passive */
-	MODE_CLIENT     = 3,    /* client */
-	MODE_SERVER     = 4,    /* server */
-	MODE_BROADCAST  = 5,    /* broadcast */
-	MODE_RES1       = 6,    /* reserved for NTP control message */
-	MODE_RES2       = 7,    /* reserved for private use */
-};
-
-#define OFFSET_1900_1970 2208988800UL  /* 1970 - 1900 in seconds */
-
-typedef struct {
-	double   d_offset;
-	double   d_delay;
-	//UNUSED: double d_error;
-	time_t   d_rcv_time;
-	uint32_t d_refid4;
-	uint8_t  d_leap;
-	uint8_t  d_stratum;
-	uint8_t  d_good;
-} datapoint_t;
-
-#define NUM_DATAPOINTS  8
-typedef struct {
-	len_and_sockaddr *p_lsa;
-	char             *p_dotted;
-	/* When to send new query (if p_fd == -1)
-	 * or when receive times out (if p_fd >= 0): */
-	time_t           next_action_time;
-	int              p_fd;
-	uint8_t          p_datapoint_idx;
-	uint8_t          p_trustlevel;
-	double           p_xmttime;
-	datapoint_t      update;
-	datapoint_t      p_datapoint[NUM_DATAPOINTS];
-	msg_t            p_xmt_msg;
-} peer_t;
-
-enum {
-	OPT_n = (1 << 0),
-	OPT_q = (1 << 1),
-	OPT_N = (1 << 2),
-	OPT_x = (1 << 3),
-	/* Insert new options above this line. */
-	/* Non-compat options: */
-	OPT_p = (1 << 4),
-	OPT_l = (1 << 5) * ENABLE_FEATURE_NTPD_SERVER,
-};
-
-
-struct globals {
-	/* total round trip delay to currently selected reference clock */
-	double   rootdelay;
-	/* reference timestamp: time when the system clock was last set or corrected */
-	double   reftime;
-	llist_t  *ntp_peers;
-#if ENABLE_FEATURE_NTPD_SERVER
-	int      listen_fd;
-#endif
-	unsigned verbose;
-	unsigned peer_cnt;
-	unsigned scale;
-	uint32_t refid;
-	uint32_t refid4;
-	uint8_t  synced;
-	uint8_t  leap;
-#define G_precision_exp -6
-//	int8_t   precision_exp;
-	uint8_t  stratum;
-	uint8_t  time_was_stepped;
-	uint8_t  first_adj_done;
-};
-#define G (*ptr_to_globals)
-
-static const int const_IPTOS_LOWDELAY = IPTOS_LOWDELAY;
-
-
-static void
-set_next(peer_t *p, unsigned t)
-{
-	p->next_action_time = time(NULL) + t;
-}
-
-static void
-add_peers(char *s)
-{
-	peer_t *p;
-
-	p = xzalloc(sizeof(*p));
-	p->p_lsa = xhost2sockaddr(s, 123);
-	p->p_dotted = xmalloc_sockaddr2dotted_noport(&p->p_lsa->u.sa);
-	p->p_fd = -1;
-	p->p_xmt_msg.m_status = MODE_CLIENT | (NTP_VERSION << 3);
-	p->p_trustlevel = TRUSTLEVEL_PATHETIC;
-	p->next_action_time = time(NULL); /* = set_next(p, 0); */
-
-	llist_add_to(&G.ntp_peers, p);
-	G.peer_cnt++;
-}
-
-static double
-gettime1900d(void)
-{
-	struct timeval tv;
-	gettimeofday(&tv, NULL); /* never fails */
-	return (tv.tv_sec + 1.0e-6 * tv.tv_usec + OFFSET_1900_1970);
-}
-
-static void
-d_to_tv(double d, struct timeval *tv)
-{
-	tv->tv_sec = (long)d;
-	tv->tv_usec = (d - tv->tv_sec) * 1000000;
-}
-
-static double
-lfp_to_d(l_fixedpt_t lfp)
-{
-	double ret;
-	lfp.int_partl = ntohl(lfp.int_partl);
-	lfp.fractionl = ntohl(lfp.fractionl);
-	ret = (double)lfp.int_partl + ((double)lfp.fractionl / UINT_MAX);
-	return ret;
-}
-
-#if 0 //UNUSED
-static double
-sfp_to_d(s_fixedpt_t sfp)
-{
-	double ret;
-	sfp.int_parts = ntohs(sfp.int_parts);
-	sfp.fractions = ntohs(sfp.fractions);
-	ret = (double)sfp.int_parts + ((double)sfp.fractions / USHRT_MAX);
-	return ret;
-}
-#endif
-
-#if ENABLE_FEATURE_NTPD_SERVER
-static l_fixedpt_t
-d_to_lfp(double d)
-{
-	l_fixedpt_t lfp;
-	lfp.int_partl = (uint32_t)d;
-	lfp.fractionl = (uint32_t)((d - lfp.int_partl) * UINT_MAX);
-	lfp.int_partl = htonl(lfp.int_partl);
-	lfp.fractionl = htonl(lfp.fractionl);
-	return lfp;
-}
-
-static s_fixedpt_t
-d_to_sfp(double d)
-{
-	s_fixedpt_t sfp;
-	sfp.int_parts = (uint16_t)d;
-	sfp.fractions = (uint16_t)((d - sfp.int_parts) * USHRT_MAX);
-	sfp.int_parts = htons(sfp.int_parts);
-	sfp.fractions = htons(sfp.fractions);
-	return sfp;
-}
-#endif
-
-static unsigned
-error_interval(void)
-{
-	unsigned interval, r;
-	interval = INTERVAL_QUERY_PATHETIC * QSCALE_OFF_MAX / QSCALE_OFF_MIN;
-	r = (unsigned)rand() % (unsigned)(interval / 10);
-	return (interval + r);
-}
-
-static int
-do_sendto(int fd,
-		const struct sockaddr *from, const struct sockaddr *to, socklen_t addrlen,
-		msg_t *msg, ssize_t len)
-{
-	ssize_t ret;
-
-	errno = 0;
-	if (!from) {
-		ret = sendto(fd, msg, len, MSG_DONTWAIT, to, addrlen);
-	} else {
-		ret = send_to_from(fd, msg, len, MSG_DONTWAIT, to, from, addrlen);
-	}
-	if (ret != len) {
-		bb_perror_msg("send failed");
-		return -1;
-	}
-	return 0;
-}
-
-static int
-send_query_to_peer(peer_t *p)
-{
-	// Why do we need to bind()?
-	// See what happens when we don't bind:
-	//
-	// socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 3
-	// setsockopt(3, SOL_IP, IP_TOS, [16], 4) = 0
-	// gettimeofday({1259071266, 327885}, NULL) = 0
-	// sendto(3, "xxx", 48, MSG_DONTWAIT, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("10.34.32.125")}, 16) = 48
-	// ^^^ we sent it from some source port picked by kernel.
-	// time(NULL)              = 1259071266
-	// write(2, "ntpd: entering poll 15 secs\n", 28) = 28
-	// poll([{fd=3, events=POLLIN}], 1, 15000) = 1 ([{fd=3, revents=POLLIN}])
-	// recv(3, "yyy", 68, MSG_DONTWAIT) = 48
-	// ^^^ this recv will receive packets to any local port!
-	//
-	// Uncomment this and use strace to see it in action:
-#define PROBE_LOCAL_ADDR // { len_and_sockaddr lsa; lsa.len = LSA_SIZEOF_SA; getsockname(p->query.fd, &lsa.u.sa, &lsa.len); }
-
-	if (p->p_fd == -1) {
-		int fd, family;
-		len_and_sockaddr *local_lsa;
-
-		family = p->p_lsa->u.sa.sa_family;
-		p->p_fd = fd = xsocket_type(&local_lsa, family, SOCK_DGRAM);
-		/* local_lsa has "null" address and port 0 now.
-		 * bind() ensures we have a *particular port* selected by kernel
-		 * and remembered in p->p_fd, thus later recv(p->p_fd)
-		 * receives only packets sent to this port.
-		 */
-		PROBE_LOCAL_ADDR
-		xbind(fd, &local_lsa->u.sa, local_lsa->len);
-		PROBE_LOCAL_ADDR
-#if ENABLE_FEATURE_IPV6
-		if (family == AF_INET)
-#endif
-			setsockopt(fd, IPPROTO_IP, IP_TOS, &const_IPTOS_LOWDELAY, sizeof(const_IPTOS_LOWDELAY));
-		free(local_lsa);
-	}
-
-	/*
-	 * Send out a random 64-bit number as our transmit time.  The NTP
-	 * server will copy said number into the originate field on the
-	 * response that it sends us.  This is totally legal per the SNTP spec.
-	 *
-	 * The impact of this is two fold: we no longer send out the current
-	 * system time for the world to see (which may aid an attacker), and
-	 * it gives us a (not very secure) way of knowing that we're not
-	 * getting spoofed by an attacker that can't capture our traffic
-	 * but can spoof packets from the NTP server we're communicating with.
-	 *
-	 * Save the real transmit timestamp locally.
-	 */
-	p->p_xmt_msg.m_xmttime.int_partl = rand();
-	p->p_xmt_msg.m_xmttime.fractionl = rand();
-	p->p_xmttime = gettime1900d();
-
-	if (do_sendto(p->p_fd, /*from:*/ NULL, /*to:*/ &p->p_lsa->u.sa, /*addrlen:*/ p->p_lsa->len,
-			&p->p_xmt_msg, NTP_MSGSIZE_NOAUTH) == -1
-	) {
-		close(p->p_fd);
-		p->p_fd = -1;
-		set_next(p, INTERVAL_QUERY_PATHETIC);
-		return -1;
-	}
-
-	if (G.verbose)
-		bb_error_msg("sent query to %s", p->p_dotted);
-	set_next(p, QUERYTIME_MAX);
-
-	return 0;
-}
-
-
-/* Time is stepped only once, when the first packet from a peer is received.
- */
-static void
-step_time_once(double offset)
-{
-	double dtime;
-	llist_t *item;
-	struct timeval tv;
-	char buf[80];
-	time_t tval;
-
-	if (G.time_was_stepped)
-		goto bail;
-	G.time_was_stepped = 1;
-
-	/* if the offset is small, don't step, slew (later) */
-	if (offset < STEPTIME_MIN_OFFSET && offset > -STEPTIME_MIN_OFFSET)
-		goto bail;
-
-	gettimeofday(&tv, NULL); /* never fails */
-	dtime = offset + tv.tv_sec;
-	dtime += 1.0e-6 * tv.tv_usec;
-	d_to_tv(dtime, &tv);
-
-	if (settimeofday(&tv, NULL) == -1)
-		bb_perror_msg_and_die("settimeofday");
-
-	tval = tv.tv_sec;
-	strftime_YYYYMMDDHHMMSS(buf, sizeof(buf), &tval);
-
-	bb_error_msg("setting clock to %s (offset %fs)", buf, offset);
-
-	for (item = G.ntp_peers; item != NULL; item = item->link) {
-		peer_t *p = (peer_t *) item->data;
-		p->next_action_time -= (time_t)offset;
-	}
-
- bail:
-	if (option_mask32 & OPT_q)
-		exit(0);
-}
-
-
-/* Time is periodically slewed when we collect enough
- * good data points.
- */
-static int
-compare_offsets(const void *aa, const void *bb)
-{
-	const peer_t *const *a = aa;
-	const peer_t *const *b = bb;
-	if ((*a)->update.d_offset < (*b)->update.d_offset)
-		return -1;
-	return ((*a)->update.d_offset > (*b)->update.d_offset);
-}
-static unsigned
-updated_scale(double offset)
-{
-	if (offset < 0)
-		offset = -offset;
-	if (offset > QSCALE_OFF_MAX)
-		return 1;
-	if (offset < QSCALE_OFF_MIN)
-		return QSCALE_OFF_MAX / QSCALE_OFF_MIN;
-	return QSCALE_OFF_MAX / offset;
-}
-static void
-slew_time(void)
-{
-	llist_t *item;
-	double offset_median;
-	struct timeval tv;
-
-	{
-		peer_t **peers = xzalloc(sizeof(peers[0]) * G.peer_cnt);
-		unsigned goodpeer_cnt = 0;
-		unsigned middle;
-
-		for (item = G.ntp_peers; item != NULL; item = item->link) {
-			peer_t *p = (peer_t *) item->data;
-			if (p->p_trustlevel < TRUSTLEVEL_BADPEER)
-				continue;
-			if (!p->update.d_good) {
-				free(peers);
-				return;
-			}
-			peers[goodpeer_cnt++] = p;
-		}
-
-		if (goodpeer_cnt == 0) {
-			free(peers);
-			goto clear_good;
-		}
-
-		qsort(peers, goodpeer_cnt, sizeof(peers[0]), compare_offsets);
-
-		middle = goodpeer_cnt / 2;
-		if (middle != 0 && (goodpeer_cnt & 1) == 0) {
-			offset_median = (peers[middle-1]->update.d_offset + peers[middle]->update.d_offset) / 2;
-			G.rootdelay = (peers[middle-1]->update.d_delay + peers[middle]->update.d_delay) / 2;
-			G.stratum = 1 + MAX(peers[middle-1]->update.d_stratum, peers[middle]->update.d_stratum);
-		} else {
-			offset_median = peers[middle]->update.d_offset;
-			G.rootdelay = peers[middle]->update.d_delay;
-			G.stratum = 1 + peers[middle]->update.d_stratum;
-		}
-		G.leap = peers[middle]->update.d_leap;
-		G.refid4 = peers[middle]->update.d_refid4;
-		G.refid =
-#if ENABLE_FEATURE_IPV6
-			peers[middle]->p_lsa->u.sa.sa_family != AF_INET ?
-				G.refid4 :
-#endif
-				peers[middle]->p_lsa->u.sin.sin_addr.s_addr;
-		free(peers);
-	}
-//TODO: if (offset_median > BIG) step_time(offset_median)?
-
-	G.scale = updated_scale(offset_median);
-
-	bb_error_msg("adjusting clock by %fs, our stratum is %u, time scale %u",
-			offset_median, G.stratum, G.scale);
-
-	errno = 0;
-	d_to_tv(offset_median, &tv);
-	if (adjtime(&tv, &tv) == -1)
-		bb_perror_msg_and_die("adjtime failed");
-	if (G.verbose >= 2)
-		bb_error_msg("old adjust: %d.%06u", (int)tv.tv_sec, (unsigned)tv.tv_usec);
-
-	if (G.first_adj_done) {
-		uint8_t synced = (tv.tv_sec == 0 && tv.tv_usec == 0);
-		if (synced != G.synced) {
-			G.synced = synced;
-			bb_error_msg("clock is %ssynced", synced ? "" : "un");
-		}
-	}
-	G.first_adj_done = 1;
-
-	G.reftime = gettime1900d();
-
- clear_good:
-	for (item = G.ntp_peers; item != NULL; item = item->link) {
-		peer_t *p = (peer_t *) item->data;
-		p->update.d_good = 0;
-	}
-}
-
-static void
-update_peer_data(peer_t *p)
-{
-	/* Clock filter.
-	 * Find the datapoint with the lowest delay.
-	 * Use that as the peer update.
-	 * Invalidate it and all older ones.
-	 */
-	int i;
-	int best = -1;
-	int good = 0;
-
-	for (i = 0; i < NUM_DATAPOINTS; i++) {
-		if (p->p_datapoint[i].d_good) {
-			good++;
-			if (best < 0 || p->p_datapoint[i].d_delay < p->p_datapoint[best].d_delay)
-				best = i;
-		}
-	}
-
-	if (good < 8) //FIXME: was it meant to be NUM_DATAPOINTS, not 8?
-		return;
-
-	p->update = p->p_datapoint[best]; /* struct copy */
-	slew_time();
-
-	for (i = 0; i < NUM_DATAPOINTS; i++)
-		if (p->p_datapoint[i].d_rcv_time <= p->p_datapoint[best].d_rcv_time)
-			p->p_datapoint[i].d_good = 0;
-}
-
-static unsigned
-scale_interval(unsigned requested)
-{
-	unsigned interval, r;
-	interval = requested * G.scale;
-	r = (unsigned)rand() % (unsigned)(MAX(5, interval / 10));
-	return (interval + r);
-}
-static void
-recv_and_process_peer_pkt(peer_t *p)
-{
-	ssize_t     size;
-	msg_t       msg;
-	double      T1, T2, T3, T4;
-	unsigned    interval;
-	datapoint_t *datapoint;
-
-	/* We can recvfrom here and check from.IP, but some multihomed
-	 * ntp servers reply from their *other IP*.
-	 * TODO: maybe we should check at least what we can: from.port == 123?
-	 */
-	size = recv(p->p_fd, &msg, sizeof(msg), MSG_DONTWAIT);
-	if (size == -1) {
-		bb_perror_msg("recv(%s) error", p->p_dotted);
-		if (errno == EHOSTUNREACH || errno == EHOSTDOWN
-		 || errno == ENETUNREACH || errno == ENETDOWN
-		 || errno == ECONNREFUSED || errno == EADDRNOTAVAIL
-		 || errno == EAGAIN
-		) {
-//TODO: always do this?
-			set_next(p, error_interval());
-			goto close_sock;
-		}
-		xfunc_die();
-	}
-
-	if (size != NTP_MSGSIZE_NOAUTH && size != NTP_MSGSIZE) {
-		bb_error_msg("malformed packet received from %s", p->p_dotted);
-		goto bail;
-	}
-
-	if (msg.m_orgtime.int_partl != p->p_xmt_msg.m_xmttime.int_partl
-	 || msg.m_orgtime.fractionl != p->p_xmt_msg.m_xmttime.fractionl
-	) {
-		goto bail;
-	}
-
-	if ((msg.m_status & LI_ALARM) == LI_ALARM
-	 || msg.m_stratum == 0
-	 || msg.m_stratum > NTP_MAXSTRATUM
-	) {
-// TODO: stratum 0 responses may have commands in 32-bit m_refid field:
-// "DENY", "RSTR" - peer does not like us at all
-// "RATE" - peer is overloaded, reduce polling freq
-		interval = error_interval();
-		bb_error_msg("reply from %s: not synced, next query in %us", p->p_dotted, interval);
-		goto close_sock;
-	}
-
-	/*
-	 * From RFC 2030 (with a correction to the delay math):
-	 *
-	 * Timestamp Name          ID   When Generated
-	 * ------------------------------------------------------------
-	 * Originate Timestamp     T1   time request sent by client
-	 * Receive Timestamp       T2   time request received by server
-	 * Transmit Timestamp      T3   time reply sent by server
-	 * Destination Timestamp   T4   time reply received by client
-	 *
-	 * The roundtrip delay and local clock offset are defined as
-	 *
-	 * delay = (T4 - T1) - (T3 - T2); offset = ((T2 - T1) + (T3 - T4)) / 2
-	 */
-	T1 = p->p_xmttime;
-	T2 = lfp_to_d(msg.m_rectime);
-	T3 = lfp_to_d(msg.m_xmttime);
-	T4 = gettime1900d();
-
-	datapoint = &p->p_datapoint[p->p_datapoint_idx];
-
-	datapoint->d_offset = ((T2 - T1) + (T3 - T4)) / 2;
-	datapoint->d_delay = (T4 - T1) - (T3 - T2);
-	if (datapoint->d_delay < 0) {
-		bb_error_msg("reply from %s: negative delay %f", p->p_dotted, datapoint->d_delay);
-		interval = error_interval();
-		set_next(p, interval);
-		goto close_sock;
-	}
-	//UNUSED: datapoint->d_error = (T2 - T1) - (T3 - T4);
-	datapoint->d_rcv_time = (time_t)(T4 - OFFSET_1900_1970); /* = time(NULL); */
-	datapoint->d_good = 1;
-
-	datapoint->d_leap = (msg.m_status & LI_MASK);
-	//UNUSED: datapoint->o_precision = msg.m_precision_exp;
-	//UNUSED: datapoint->o_rootdelay = sfp_to_d(msg.m_rootdelay);
-	//UNUSED: datapoint->o_rootdispersion = sfp_to_d(msg.m_dispersion);
-	//UNUSED: datapoint->d_refid = ntohl(msg.m_refid);
-	datapoint->d_refid4 = msg.m_xmttime.fractionl;
-	//UNUSED: datapoint->o_reftime = lfp_to_d(msg.m_reftime);
-	//UNUSED: datapoint->o_poll = msg.m_ppoll;
-	datapoint->d_stratum = msg.m_stratum;
-
-	if (p->p_trustlevel < TRUSTLEVEL_PATHETIC)
-		interval = scale_interval(INTERVAL_QUERY_PATHETIC);
-	else if (p->p_trustlevel < TRUSTLEVEL_AGRESSIVE)
-		interval = scale_interval(INTERVAL_QUERY_AGRESSIVE);
-	else
-		interval = scale_interval(INTERVAL_QUERY_NORMAL);
-
-	set_next(p, interval);
-
-	/* Every received reply which we do not discard increases trust */
-	if (p->p_trustlevel < TRUSTLEVEL_MAX) {
-		p->p_trustlevel++;
-		if (p->p_trustlevel == TRUSTLEVEL_BADPEER)
-			bb_error_msg("peer %s now valid", p->p_dotted);
-	}
-
-	if (G.verbose)
-		bb_error_msg("reply from %s: offset %f delay %f, next query in %us", p->p_dotted,
-			datapoint->d_offset, datapoint->d_delay, interval);
-
-	update_peer_data(p);
-//TODO: do it after all peers had a chance to return at least one reply?
-	step_time_once(datapoint->d_offset);
-
-	p->p_datapoint_idx++;
-	if (p->p_datapoint_idx >= NUM_DATAPOINTS)
-		p->p_datapoint_idx = 0;
-
- close_sock:
-	/* We do not expect any more packets from this peer for now.
-	 * Closing the socket informs kernel about it.
-	 * We open a new socket when we send a new query.
-	 */
-	close(p->p_fd);
-	p->p_fd = -1;
- bail:
-	return;
-}
-
-#if ENABLE_FEATURE_NTPD_SERVER
-static void
-recv_and_process_client_pkt(void /*int fd*/)
-{
-	ssize_t          size;
-	uint8_t          version;
-	double           rectime;
-	len_and_sockaddr *to;
-	struct sockaddr  *from;
-	msg_t            msg;
-	uint8_t          query_status;
-	uint8_t          query_ppoll;
-	l_fixedpt_t      query_xmttime;
-
-	to = get_sock_lsa(G.listen_fd);
-	from = xzalloc(to->len);
-
-	size = recv_from_to(G.listen_fd, &msg, sizeof(msg), MSG_DONTWAIT, from, &to->u.sa, to->len);
-	if (size != NTP_MSGSIZE_NOAUTH && size != NTP_MSGSIZE) {
-		char *addr;
-		if (size < 0) {
-			if (errno == EAGAIN)
-				goto bail;
-			bb_perror_msg_and_die("recv");
-		}
-		addr = xmalloc_sockaddr2dotted_noport(from);
-		bb_error_msg("malformed packet received from %s: size %u", addr, (int)size);
-		free(addr);
-		goto bail;
-	}
-
-	query_status = msg.m_status;
-	query_ppoll = msg.m_ppoll;
-	query_xmttime = msg.m_xmttime;
-
-	/* Build a reply packet */
-	memset(&msg, 0, sizeof(msg));
-	msg.m_status = G.synced ? G.leap : LI_ALARM;
-	msg.m_status |= (query_status & VERSION_MASK);
-	msg.m_status |= ((query_status & MODE_MASK) == MODE_CLIENT) ?
-			MODE_SERVER : MODE_SYM_PAS;
-	msg.m_stratum = G.stratum;
-	msg.m_ppoll = query_ppoll;
-	msg.m_precision_exp = G_precision_exp;
-	rectime = gettime1900d();
-	msg.m_xmttime = msg.m_rectime = d_to_lfp(rectime);
-	msg.m_reftime = d_to_lfp(G.reftime);
-	//msg.m_xmttime = d_to_lfp(gettime1900d()); // = msg.m_rectime
-	msg.m_orgtime = query_xmttime;
-	msg.m_rootdelay = d_to_sfp(G.rootdelay);
-	version = (query_status & VERSION_MASK); /* ... >> VERSION_SHIFT - done below instead */
-	msg.m_refid = (version > (3 << VERSION_SHIFT)) ? G.refid4 : G.refid;
-
-	/* We reply from the local address packet was sent to,
-	 * this makes to/from look swapped here: */
-	do_sendto(G.listen_fd,
-		/*from:*/ &to->u.sa, /*to:*/ from, /*addrlen:*/ to->len,
-		&msg, size);
-
- bail:
-	free(to);
-	free(from);
-}
-#endif
-
-/* Upstream ntpd's options:
- *
- * -4   Force DNS resolution of host names to the IPv4 namespace.
- * -6   Force DNS resolution of host names to the IPv6 namespace.
- * -a   Require cryptographic authentication for broadcast client,
- *      multicast client and symmetric passive associations.
- *      This is the default.
- * -A   Do not require cryptographic authentication for broadcast client,
- *      multicast client and symmetric passive associations.
- *      This is almost never a good idea.
- * -b   Enable the client to synchronize to broadcast servers.
- * -c conffile
- *      Specify the name and path of the configuration file,
- *      default /etc/ntp.conf
- * -d   Specify debugging mode. This option may occur more than once,
- *      with each occurrence indicating greater detail of display.
- * -D level
- *      Specify debugging level directly.
- * -f driftfile
- *      Specify the name and path of the frequency file.
- *      This is the same operation as the "driftfile FILE"
- *      configuration command.
- * -g   Normally, ntpd exits with a message to the system log
- *      if the offset exceeds the panic threshold, which is 1000 s
- *      by default. This option allows the time to be set to any value
- *      without restriction; however, this can happen only once.
- *      If the threshold is exceeded after that, ntpd will exit
- *      with a message to the system log. This option can be used
- *      with the -q and -x options. See the tinker command for other options.
- * -i jaildir
- *      Chroot the server to the directory jaildir. This option also implies
- *      that the server attempts to drop root privileges at startup
- *      (otherwise, chroot gives very little additional security).
- *      You may need to also specify a -u option.
- * -k keyfile
- *      Specify the name and path of the symmetric key file,
- *      default /etc/ntp/keys. This is the same operation
- *      as the "keys FILE" configuration command.
- * -l logfile
- *      Specify the name and path of the log file. The default
- *      is the system log file. This is the same operation as
- *      the "logfile FILE" configuration command.
- * -L   Do not listen to virtual IPs. The default is to listen.
- * -n   Don't fork.
- * -N   To the extent permitted by the operating system,
- *      run the ntpd at the highest priority.
- * -p pidfile
- *      Specify the name and path of the file used to record the ntpd
- *      process ID. This is the same operation as the "pidfile FILE"
- *      configuration command.
- * -P priority
- *      To the extent permitted by the operating system,
- *      run the ntpd at the specified priority.
- * -q   Exit the ntpd just after the first time the clock is set.
- *      This behavior mimics that of the ntpdate program, which is
- *      to be retired. The -g and -x options can be used with this option.
- *      Note: The kernel time discipline is disabled with this option.
- * -r broadcastdelay
- *      Specify the default propagation delay from the broadcast/multicast
- *      server to this client. This is necessary only if the delay
- *      cannot be computed automatically by the protocol.
- * -s statsdir
- *      Specify the directory path for files created by the statistics
- *      facility. This is the same operation as the "statsdir DIR"
- *      configuration command.
- * -t key
- *      Add a key number to the trusted key list. This option can occur
- *      more than once.
- * -u user[:group]
- *      Specify a user, and optionally a group, to switch to.
- * -v variable
- * -V variable
- *      Add a system variable listed by default.
- * -x   Normally, the time is slewed if the offset is less than the step
- *      threshold, which is 128 ms by default, and stepped if above
- *      the threshold. This option sets the threshold to 600 s, which is
- *      well within the accuracy window to set the clock manually.
- *      Note: since the slew rate of typical Unix kernels is limited
- *      to 0.5 ms/s, each second of adjustment requires an amortization
- *      interval of 2000 s. Thus, an adjustment as much as 600 s
- *      will take almost 14 days to complete. This option can be used
- *      with the -g and -q options. See the tinker command for other options.
- *      Note: The kernel time discipline is disabled with this option.
- */
-
-/* By doing init in a separate function we decrease stack usage
- * in main loop.
- */
-static NOINLINE void ntp_init(char **argv)
-{
-	unsigned opts;
-	llist_t *peers;
-
-	srand(getpid());
-
-	if (getuid())
-		bb_error_msg_and_die(bb_msg_you_must_be_root);
-
-	peers = NULL;
-	opt_complementary = "dd:p::"; /* d: counter, p: list */
-	opts = getopt32(argv,
-			"nqNx" /* compat */
-			"p:"IF_FEATURE_NTPD_SERVER("l") /* NOT compat */
-			"d" /* compat */
-			"46aAbgL", /* compat, ignored */
-			&peers, &G.verbose);
-	if (!(opts & (OPT_p|OPT_l)))
-		bb_show_usage();
-	if (opts & OPT_x) /* disable stepping, only slew is allowed */
-		G.time_was_stepped = 1;
-	while (peers)
-		add_peers(llist_pop(&peers));
-	if (!(opts & OPT_n)) {
-		bb_daemonize_or_rexec(DAEMON_DEVNULL_STDIO, argv);
-		logmode = LOGMODE_NONE;
-	}
-#if ENABLE_FEATURE_NTPD_SERVER
-	G.listen_fd = -1;
-	if (opts & OPT_l) {
-		G.listen_fd = create_and_bind_dgram_or_die(NULL, 123);
-		socket_want_pktinfo(G.listen_fd);
-		setsockopt(G.listen_fd, IPPROTO_IP, IP_TOS, &const_IPTOS_LOWDELAY, sizeof(const_IPTOS_LOWDELAY));
-	}
-#endif
-	/* I hesitate to set -20 prio. -15 should be high enough for timekeeping */
-	if (opts & OPT_N)
-		setpriority(PRIO_PROCESS, 0, -15);
-
-	/* Set some globals */
-#if 0
-	/* With constant b = 100, G.precision_exp is also constant -6.
-	 * Uncomment this and you'll see */
-	{
-		int prec = 0;
-		int b;
-# if 0
-		struct timespec tp;
-		/* We can use sys_clock_getres but assuming 10ms tick should be fine */
-		clock_getres(CLOCK_REALTIME, &tp);
-		tp.tv_sec = 0;
-		tp.tv_nsec = 10000000;
-		b = 1000000000 / tp.tv_nsec;  /* convert to Hz */
-# else
-		b = 100; /* b = 1000000000/10000000 = 100 */
-# endif
-		while (b > 1)
-			prec--, b >>= 1;
-		//G.precision_exp = prec;
-		bb_error_msg("G.precision_exp:%d", prec); /* -6 */
-	}
-#endif
-	G.scale = 1;
-
-	bb_signals((1 << SIGTERM) | (1 << SIGINT), record_signo);
-	bb_signals((1 << SIGPIPE) | (1 << SIGHUP), SIG_IGN);
-}
-
-int ntpd_main(int argc UNUSED_PARAM, char **argv) MAIN_EXTERNALLY_VISIBLE;
-int ntpd_main(int argc UNUSED_PARAM, char **argv)
-{
-	struct globals g;
-	struct pollfd *pfd;
-	peer_t **idx2peer;
-
-	memset(&g, 0, sizeof(g));
-	SET_PTR_TO_GLOBALS(&g);
-
-	ntp_init(argv);
-
-	{
-		/* if ENABLE_FEATURE_NTPD_SERVER, + 1 for listen_fd: */
-		unsigned cnt = g.peer_cnt + ENABLE_FEATURE_NTPD_SERVER;
-		idx2peer = xzalloc(sizeof(idx2peer[0]) * cnt);
-		pfd = xzalloc(sizeof(pfd[0]) * cnt);
-	}
-
-	while (!bb_got_signal) {
-		llist_t *item;
-		unsigned i, j;
-		unsigned sent_cnt, trial_cnt;
-		int nfds, timeout;
-		time_t cur_time, nextaction;
-
-		/* Nothing between here and poll() blocks for any significant time */
-
-		cur_time = time(NULL);
-		nextaction = cur_time + 3600;
-
-		i = 0;
-#if ENABLE_FEATURE_NTPD_SERVER
-		if (g.listen_fd != -1) {
-			pfd[0].fd = g.listen_fd;
-			pfd[0].events = POLLIN;
-			i++;
-		}
-#endif
-		/* Pass over peer list, send requests, time out on receives */
-		sent_cnt = trial_cnt = 0;
-		for (item = g.ntp_peers; item != NULL; item = item->link) {
-			peer_t *p = (peer_t *) item->data;
-
-			/* Overflow-safe "if (p->next_action_time <= cur_time) ..." */
-			if ((int)(cur_time - p->next_action_time) >= 0) {
-				if (p->p_fd == -1) {
-					/* Time to send new req */
-					trial_cnt++;
-					if (send_query_to_peer(p) == 0)
-						sent_cnt++;
-				} else {
-					/* Timed out waiting for reply */
-					close(p->p_fd);
-					p->p_fd = -1;
-					timeout = error_interval();
-					bb_error_msg("timed out waiting for %s, "
-							"next query in %us", p->p_dotted, timeout);
-					if (p->p_trustlevel >= TRUSTLEVEL_BADPEER) {
-						p->p_trustlevel /= 2;
-						if (p->p_trustlevel < TRUSTLEVEL_BADPEER)
-							bb_error_msg("peer %s now invalid", p->p_dotted);
-					}
-					set_next(p, timeout);
-				}
-			}
-
-			if (p->next_action_time < nextaction)
-				nextaction = p->next_action_time;
-
-			if (p->p_fd >= 0) {
-				/* Wait for reply from this peer */
-				pfd[i].fd = p->p_fd;
-				pfd[i].events = POLLIN;
-				idx2peer[i] = p;
-				i++;
-			}
-		}
-
-		if ((trial_cnt > 0 && sent_cnt == 0) || g.peer_cnt == 0)
-			step_time_once(0); /* no good peers, don't wait */
-
-		timeout = nextaction - cur_time;
-		if (timeout < 1)
-			timeout = 1;
-
-		/* Here we may block */
-		if (g.verbose >= 2)
-			bb_error_msg("poll %us, sockets:%u", timeout, i);
-		nfds = poll(pfd, i, timeout * 1000);
-		if (nfds <= 0)
-			continue;
-
-		/* Process any received packets */
-		j = 0;
-#if ENABLE_FEATURE_NTPD_SERVER
-		if (g.listen_fd != -1) {
-			if (pfd[0].revents /* & (POLLIN|POLLERR)*/) {
-				nfds--;
-				recv_and_process_client_pkt(/*g.listen_fd*/);
-			}
-			j = 1;
-		}
-#endif
-		for (; nfds != 0 && j < i; j++) {
-			if (pfd[j].revents /* & (POLLIN|POLLERR)*/) {
-				nfds--;
-				recv_and_process_peer_pkt(idx2peer[j]);
-			}
-		}
-	} /* while (!bb_got_signal) */
-
-	kill_myself_with_sig(bb_got_signal);
-}


More information about the busybox-cvs mailing list