[Buildroot] [PATCH 1/1] configs/rock64: update defconfig

michal.lyszczek at bofc.pl michal.lyszczek at bofc.pl
Tue Dec 15 11:28:20 UTC 2020


On 2020-12-15 00:49:03, Min Xu wrote:
> Revert "configs/rock64_defconfig: remove defconfig" a5fa2469e6506ea4f5a91739aa099f63a10e45ce
> 
> bump uboot from 2017.09 to release-2020-07 from ayufan-rock64/linux-mainline-u-boot
> 
> Signed-off-by: Min Xu <xuminready at gmail.com>

Tested-by: Michał Łyszczek <michal.lyszczek at bofc.pl>

> ---
>  DEVELOPERS                                    |  2 +
>  board/pine64/rock64/extlinux.conf             |  4 +
>  board/pine64/rock64/genimage.cfg              | 23 +++++
>  ...328-needs-itb-image-to-boot-properly.patch | 32 +++++++
>  board/pine64/rock64/post-build.sh             |  9 ++
>  board/pine64/rock64/readme.txt                | 95 +++++++++++++++++++
>  configs/rock64_defconfig                      | 38 ++++++++
>  7 files changed, 203 insertions(+)
>  create mode 100644 board/pine64/rock64/extlinux.conf
>  create mode 100644 board/pine64/rock64/genimage.cfg
>  create mode 100644 board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
>  create mode 100755 board/pine64/rock64/post-build.sh
>  create mode 100644 board/pine64/rock64/readme.txt
>  create mode 100644 configs/rock64_defconfig
> 
> diff --git a/DEVELOPERS b/DEVELOPERS
> index a2c7f7f..1944cbb 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -1858,6 +1858,8 @@ F:	package/libavl/
>  
>  N:	Michał Łyszczek <michal.lyszczek at bofc.pl>
>  F:	board/altera/socrates_cyclone5/
> +F:	board/pine64/rock64
> +F:	configs/rock64_defconfig
>  F:	configs/socrates_cyclone5_defconfig
>  F:	package/netifrc/
>  F:	package/openrc/
> diff --git a/board/pine64/rock64/extlinux.conf b/board/pine64/rock64/extlinux.conf
> new file mode 100644
> index 0000000..bf71982
> --- /dev/null
> +++ b/board/pine64/rock64/extlinux.conf
> @@ -0,0 +1,4 @@
> +label rock64-buildroot
> +  kernel /boot/Image
> +  devicetree /boot/rk3328-rock64.dtb
> +  append console=ttyS2,1500000n8 root=/dev/mmcblk0p1 ro rootwait
> diff --git a/board/pine64/rock64/genimage.cfg b/board/pine64/rock64/genimage.cfg
> new file mode 100644
> index 0000000..0b5a0d8
> --- /dev/null
> +++ b/board/pine64/rock64/genimage.cfg
> @@ -0,0 +1,23 @@
> +image sdcard.img {
> +    hdimage {
> +    }
> +
> +    partition uboot-spl {
> +        in-partition-table = "no"
> +        image = "u-boot-tpl-spl.img"
> +        offset = 32768 # 512 * 0x40 from start of sd card
> +    }
> +
> +    partition uboot {
> +        in-partition-table = "no"
> +        image = "u-boot.itb"
> +        offset = 262144 # 512 * 0x200 from start of sd card
> +    }
> +
> +    partition rootfs {
> +        partition-type = 0x83
> +        bootable = "yes"
> +        image = "rootfs.ext2"
> +        size = 500M
> +    }
> +}
> diff --git a/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch b/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
> new file mode 100644
> index 0000000..2d35b78
> --- /dev/null
> +++ b/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
> @@ -0,0 +1,32 @@
> +From 211bf049084e6e374dac253138fa813682910146 Mon Sep 17 00:00:00 2001
> +From: =?UTF-8?q?Micha=C5=82=20=C5=81yszczek?= <michal.lyszczek at bofc.pl>
> +Date: Tue, 5 Feb 2019 22:08:54 +0100
> +Subject: [PATCH] Makefile: rk3328 needs itb image to boot properly
> +MIME-Version: 1.0
> +Content-Type: text/plain; charset=UTF-8
> +Content-Transfer-Encoding: 8bit
> +
> +Signed-off-by: Michał Łyszczek <michal.lyszczek at bofc.pl>
> +---
> + Makefile | 5 +++++
> + 1 file changed, 5 insertions(+)
> +
> +diff --git a/Makefile b/Makefile
> +index 8086f3c93e..a6425b5b03 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -799,6 +799,11 @@ ifneq ($(BUILD_ROM),)
> + ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
> + endif
> + 
> ++# rk3328 needs itb image to boot properly
> ++ifeq ($(CONFIG_ROCKCHIP_RK3328),y)
> ++ALL-y += u-boot.itb
> ++endif
> ++
> + # enable combined SPL/u-boot/dtb rules for tegra
> + ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
> + ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
> +-- 
> +2.18.1
> +
> diff --git a/board/pine64/rock64/post-build.sh b/board/pine64/rock64/post-build.sh
> new file mode 100755
> index 0000000..26b53cb
> --- /dev/null
> +++ b/board/pine64/rock64/post-build.sh
> @@ -0,0 +1,9 @@
> +#!/bin/sh
> +
> +MKIMAGE=$HOST_DIR/bin/mkimage
> +BOARD_DIR="$(dirname $0)"
> +
> +$MKIMAGE -n rk3328 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
> +cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl.bin > $BINARIES_DIR/u-boot-tpl-spl.img
> +
> +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
> diff --git a/board/pine64/rock64/readme.txt b/board/pine64/rock64/readme.txt
> new file mode 100644
> index 0000000..029c676
> --- /dev/null
> +++ b/board/pine64/rock64/readme.txt
> @@ -0,0 +1,95 @@
> +Intro
> +=====
> +
> +This default configuration will allow you to start experimenting with the
> +buildroot environment for the Rock64. With this default configuration you
> +can log in into board via uart and look around.
> +
> +Board homepage: https://www.pine64.org/?page_id=7147
> +
> +Build
> +=====
> +
> +First, load rock64 config for buildroot
> +
> +  $ make rock64_defconfig
> +
> +Optionally make changes to buildroot config (to install more programs)
> +
> +  $ make menuconfig
> +
> +And then build everything
> +
> +  $ make
> +
> +When completed, following files will be generated in output/images directory:
> +
> +  .
> +  ├── Image
> +  ├── bl31.bin
> +  ├── bl31.elf
> +  ├── rk3328-rock64.dtb
> +  ├── rootfs.ext2
> +  ├── rootfs.ext4 -> rootfs.ext2
> +  ├── rootfs.tar
> +  ├── sdcard.img
> +  ├── u-boot-spl.bin
> +  ├── u-boot-tpl-spl.img
> +  ├── u-boot-tpl.bin
> +  ├── u-boot-tpl.img
> +  ├── u-boot.bin
> +  └── u-boot.itb
> +
> +Creating bootable SD card
> +=========================
> +
> +!!! THIS COMMAND MAY WIPE YOUR DISK!
> +!!! MAKE SURE YOU PASSED CORRECT DEVICE!
> +!!! OR IT THIS WILL WIPE YOUR DISK!
> +
> +Simply invoke (as root)
> +
> +  # dd if=output/images/sdcard.img of=/dev/sdX && sync
> +
> +Where X is your SD card device (not partition), of= argument may also be
> +/dev/mmcblk0 if you are using built-in sd card reader.
> +
> +Runtime
> +=======
> +
> +Login
> +-----
> +
> +By default, buildroot has no password, just type 'root' as login user, and
> +you will be logged in.
> +
> +Serial console
> +--------------
> +
> +Serial console needs to be connected to pins (into 40pin rpi compatible part)
> +
> +pin 6:  gnd
> +pin 8:  tx
> +pin 10: rx
> +
> +Pin numbers are printed on board.
> +
> +Uart configuration is not standard. Rock64 uses 1500000 (1,5M) baudrate
> +with standard 8n1.
> +
> +Ethernet
> +--------
> +
> +To enable ethernet you need to load modules for it:
> +
> +# modprobe stmmac
> +# modprobe dwmac-rk
> +
> +and since by default there is no dhcp installed, you need to configure ip
> +address, remember to change address to fit your network.
> +
> +# ifconfig eth0 up
> +# ip addr add 10.1.1.180/24 dev eth0
> +# ping 10.1.1.1
> +PING 10.1.1.1 (10.1.1.1): 56 data bytes
> +64 bytes from 10.1.1.1: seq=0 ttl=64 time=0.695 ms
> diff --git a/configs/rock64_defconfig b/configs/rock64_defconfig
> new file mode 100644
> index 0000000..df03e35
> --- /dev/null
> +++ b/configs/rock64_defconfig
> @@ -0,0 +1,38 @@
> +BR2_aarch64=y
> +BR2_GLOBAL_PATCH_DIR="board/pine64/rock64/patches"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS2"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rock64/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rock64/genimage.cfg"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.19"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-rock64"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="bl31/*.elf"
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/ayufan-rock64/linux-mainline-u-boot.git"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="release-2020-07"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock64-rk3328"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
> +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin tpl/u-boot-tpl.bin"
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
> -- 
> 2.20.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20201215/af3ddb4e/attachment-0002.asc>


More information about the buildroot mailing list