[Buildroot] beaglebone_qt5 does not build since commit a7914499b80
unixmania at gmail.com
Thu Oct 31 01:30:22 UTC 2019
On Tue, Oct 15, 2019 at 10:07 PM Carlos Santos <unixmania at gmail.com> wrote:
> On Tue, Oct 15, 2019 at 6:31 PM Lothar Felten <lothar.felten at gmail.com> wrote:
> > On Sun, 2019-10-13 at 11:57 -0300, Carlos Santos wrote:
> > > I have a beaglebone black and can make some experiments this week.
> > Hello Carlos,
> > I have four patches, they allow you to build a new kernel, kernel
> > module and userspace tools including libgbm for the beaglebone with the
> > current toolchain.
> > You can run the GLES(1) demos, I had no success with the GLES2 demos.
> > The last patch is for qt5base, but it is incomplete, it won't compile
> > the qpa backend yet.
> > I'll post the four patches with RFC prefix to the list.
> > Best regards,
> > Lothar
> Thanks. I will test them as time permits.
I'm attempting to test your last patches on my Beaglebone Black but
had no success. I event attempted the plain beaglebone_defconfig to
simplify the build but it still hangs on boot:
U-Boot 2013.10-dirty (Nov 14 2013 - 12:59:11)
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
Hit any key to stop autoboot: 0
mmc0 is current device
SD/MMC found on device 0
376 bytes read in 3 ms (122.1 KiB/s)
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
6076272 bytes read in 568 ms (10.2 MiB/s)
36717 bytes read in 8 ms (4.4 MiB/s)
bootargs=console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
Kernel image @ 0x80200000 [ 0x000000 - 0x5cb770 ]
## Flattened Device Tree blob at 80f80000
Booting using the fdt blob at 0x80f80000
Using Device Tree in place at 80f80000, end 80f8bf6c
Starting kernel ...
This is with the master branch as of commit
3db8622f311f46cea9dcc2f9dbed48ca543b2e24 plus the reversion of commit
Carlos Santos <unixmania at gmail.com>
More information about the buildroot