[Buildroot] [PATCH next 4/5] configs/solidrun_macchiatobin_mainline: bump kernel and U-Boot
geomatsi at gmail.com
Tue Nov 20 16:31:04 UTC 2018
> Bump U-Boot to version 2018.11. This version supports autodetection of
> SD/eMMC boot source, so we can now enable environment load from SD card.
> Add a U-Boot kconfig fragment that sets SD/eMMC as environment load/save
> device. This avoids stale environment values from the SPI flash. That in
> turn, allows to use the more convenient distro boot which is enabled in
> the default environment.
> Bump kernel to version 4.19.2. This version enables
> CONFIG_PHY_MVEBU_CP110_COMPHY in the arm64 defconfig, so remove it from
> the kernel kconfig fragment. Enable support for SFP modules detection
> and configuration. Leave the PHY drivers for now to keep them built into
> the kernel. The kernel defconfig builds these drivers as modules. But
> that does not work as expected in the default configuration.
> Cc: Sergey Matyukevich <geomatsi at gmail.com>
> Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> board/solidrun/macchiatobin/extlinux.conf | 4 ++++
> board/solidrun/macchiatobin/linux-extras.config | 2 +-
> board/solidrun/macchiatobin/post-build-mainline.sh | 5 +++++
> board/solidrun/macchiatobin/uboot-fragment.config | 2 ++
> configs/solidrun_macchiatobin_mainline_defconfig | 13 ++++++++-----
> 5 files changed, 20 insertions(+), 6 deletions(-)
> create mode 100644 board/solidrun/macchiatobin/extlinux.conf
> create mode 100755 board/solidrun/macchiatobin/post-build-mainline.sh
> create mode 100644 board/solidrun/macchiatobin/uboot-fragment.config
Thanks! Verified the changes on MacchiatoBin v2 board:
Tested-by: Sergey Matyukevich <geomatsi at gmail.com>
By the way, it looks like mainline U-Boot v2018.11 still detects only 2GiB
of DRAM on my boards. Meanwhile vendor U-Boot provided by alternative
config solidrun_macchiatobin_marvell_defconfig detects 4GiB.
More information about the buildroot