[Buildroot] [PATCH v2 1/1] board: add support for Xilinx zc706

Jordi Montagne jordi.montagne66 at gmail.com
Wed Mar 11 07:57:10 UTC 2015


This is a Xilinx Zynq (xc7z045) development board, based on Xilinx Zynq
(xc7z045).

This support is based on Avnet Zedboard defconfig/readme.

Signed-off-by: Jordi Montagne <jordi.montagne66 at gmail.com>
---
Changes since v1:
 * use EABIHF instead of EABI
 * some fix on readme.txt (thanks Thomas Petazzoni)
---
 board/xilinx/zc706/readme.txt | 57 +++++++++++++++++++++++++++++++++++++++++++
 configs/zc706_defconfig       | 27 ++++++++++++++++++++
 2 files changed, 84 insertions(+)
 create mode 100644 board/xilinx/zc706/readme.txt
 create mode 100644 configs/zc706_defconfig

diff --git a/board/xilinx/zc706/readme.txt b/board/xilinx/zc706/readme.txt
new file mode 100644
index 0000000..6ab5bc9
--- /dev/null
+++ b/board/xilinx/zc706/readme.txt
@@ -0,0 +1,57 @@
+This is the Buildroot board support for the Xilinx ZC706. The ZC706 is
+a development board based on the Xilinx Zynq-7000 based All-Programmable
+System-On-Chip.
+
+ZC706 information including schematics, reference designs, and manuals are
+available from
+http://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html.
+
+uboot.bin  -- U-Boot SPL w/ Xilinx boot.bin wrapper
+---------------------------------------------------
+
+Due to licensing issues, the files ps7_init.c/h are not able to be
+distributed with the U-Boot source code.  These files are required to make a
+boot.bin file.
+
+If you already have the Xilinx tools installed, the following sequence will
+unpack, patch and build the rfs, kernel, uboot, and uboot-spl.
+
+make zc706_defconfig
+make uboot-patch
+cp ${XILINX_SDK_LIB}/hwplatform_templates/ZC706_hw_platform/ps7_init.{c,h} \
+output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/
+
+Where ${XILINX_SDK_LIB} is ${XILINX}/SDK/${VERSION}/data/embeddedsw/lib.
+
+After copying these files into the U-Boot source tree, you can
+continue the build with:
+
+make
+
+*Notice*
+While the build will successfully complete without the ps7_init.*
+files, the uboot.bin file generated by this configuration will not
+function properly on the ZC706. Therefore, it is imperative that
+the ps7_init.* files be copied into the U-Boot source tree any time
+the clean, or uboot-dirclean targets are executed.
+
+
+Resulting system
+----------------
+
+A FAT32 partition should be created at the beggining of the SD Card
+and the following files should be installed:
+	boot.bin
+	devicetree.dtb
+	uImage
+	uramdisk.image.gz
+	u-boot.img
+
+
+All needed files can be taken from <output>/images/
+
+cp <output>/images/boot.bin /media/sdcard/
+cp <output>/images/uImage /media/sdcard/
+cp <output>/images/u-boot.img /media/sdcard/
+cp <output>/images/zynq-zc706.dtb /media/sdcard/devicetree.dtb
+cp <output>/images/rootfs.cpio.uboot /media/sdcard/uramdisk.image.gz
diff --git a/configs/zc706_defconfig b/configs/zc706_defconfig
new file mode 100644
index 0000000..f7600b1
--- /dev/null
+++ b/configs/zc706_defconfig
@@ -0,0 +1,27 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_ARM_EABIHF=y
+BR2_ARM_ENABLE_NEON=y
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.8"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_8=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/Xilinx/linux-xlnx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="xilinx-v2014.2.01"
+BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-zc706"
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_GZIP=y
+BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="zynq_zc70x"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://github.com/Xilinx/u-boot-xlnx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="xilinx-v2014.1"
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="boot.bin"
-- 
2.0.5



More information about the buildroot mailing list