[Buildroot] [git commit] pkg-infra: don't use DL_DIR as scratchpad for temporary downloads

Peter Korsgaard peter at korsgaard.com
Fri Jul 4 21:28:13 UTC 2014


commit: http://git.buildroot.net/buildroot/commit/?id=19afad50f58b15b57ae3da673b9ba750a641350f
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master

DL_DIR can be a very precious place for some users: they use it to store
all the downloaded archives to share across all their Buildroot (and
maybe non-Buildroot) builds.

We do not want to trash this location with our temporary downloads (e.g.
git, Hg, svn, cvs repository clones/checkouts, or wget, bzr tep tarballs).

Turns out that we already have some kind of scratchpad, the BUILD_DIR.
Although it is not really a disposable location, that's the best we have
so far.

Also, we create the temporary tarballs with mktemp using the final tarball,
as template, since we want the temporary to be on the same filesystem as
the final location, so the 'mv' is just a plain, atomic rename(2), and we
are not left with a half-copied file as the final location.

Using mktemp ensures all temp file names are unique, so it allows for
parallel downloads from different build dirs at the same time, without
cloberring each downloads.

Note: we're using neither ${TMP} nor ${TMPDIR} since they are shared
locations, sometime with little place (eg. tmpfs), and some of the
repositories we clone/checkout can be very big.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998 at free.fr>
Cc: Samuel Martin <s.martin49 at gmail.com>
Cc: Arnout Vandecappelle <arnout at mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin at gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire at gmail.com>
[tested a particular scenario that used to fail: two separate builds
using a shared DL_DIR, ccache enabled, so that they run almost
synchronously. These would download the same file at the same time,
corrupting each other. With the patches in this series, all works
fine.]
Signed-off-by: Peter Korsgaard <peter at korsgaard.com>
---
 support/download/bzr  |   25 ++++++++++++++++++++++---
 support/download/cp   |   12 +++++++++++-
 support/download/cvs  |   34 +++++++++++++++++++++++++++-------
 support/download/git  |   33 ++++++++++++++++++++++++++-------
 support/download/hg   |   35 ++++++++++++++++++++++++++++-------
 support/download/scp  |   14 +++++++++++++-
 support/download/svn  |   33 ++++++++++++++++++++++++++-------
 support/download/wget |   26 ++++++++++++++++++++------
 8 files changed, 173 insertions(+), 39 deletions(-)

diff --git a/support/download/bzr b/support/download/bzr
index f07732e..3f52ee9 100755
--- a/support/download/bzr
+++ b/support/download/bzr
@@ -9,11 +9,30 @@ set -e
 #   $2: bzr revision
 #   $3: output file
 # And this environment:
-#   BZR       : the bzr command to call
-#   BR2_DL_DIR: path to Buildroot's download dir
+#   BZR      : the bzr command to call
+#   BUILD_DIR: path to Buildroot's build dir
 
 repo="${1}"
 rev="${2}"
 output="${3}"
 
-${BZR} export "${output}" "${repo}" -r "${rev}"
+tmp_dl="$( mktemp "${BUILD_DIR}/.XXXXXX" )"
+tmp_output="$( mktemp "${output}.XXXXXX" )"
+
+# Play tic-tac-toe with temp files
+# - first, we download to a trashable location (the build-dir)
+# - the we move to a temp file in the final location, so it is
+#   on the same filesystem as the final file
+# - finally, we atomically rename to the final file
+
+ret=1
+if ${BZR} export "${tmp_dl}" "${repo}" -r "${rev}"; then
+    if mv "${tmp_dl}" "${tmp_output}"; then
+        mv "${tmp_output}" "${output}"
+        ret=0
+    fi
+fi
+
+# Cleanup
+rm -f "${tmp_dl}" "${tmp_output}"
+exit ${ret}
diff --git a/support/download/cp b/support/download/cp
index 3e9f548..8f6bc06 100755
--- a/support/download/cp
+++ b/support/download/cp
@@ -13,4 +13,14 @@ set -e
 source="${1}"
 output="${2}"
 
-${LOCALFILES} "${source}" "${output}"
+tmp_output="$( mktemp "${output}.XXXXXX" )"
+
+ret=1
+if ${LOCALFILES} "${source}" "${tmp_output}"; then
+    mv "${tmp_output}" "${output}"
+    ret=0
+fi
+
+# Cleanup
+rm -f "${tmp_output}"
+exit ${ret}
diff --git a/support/download/cvs b/support/download/cvs
index 60787a6..9aeed79 100755
--- a/support/download/cvs
+++ b/support/download/cvs
@@ -11,8 +11,8 @@ set -e
 #   $4: package's basename (eg. foobar-1.2.3)
 #   $5: output file
 # And this environment:
-#   CVS       : the cvs command to call
-#   BR2_DL_DIR: path to Buildroot's download dir
+#   CVS      : the cvs command to call
+#   BUILD_DIR: path to Buildroot's build dir
 
 repo="${1}"
 rev="${2}"
@@ -20,8 +20,28 @@ rawname="${3}"
 basename="${4}"
 output="${5}"
 
-cd "${BR2_DL_DIR}"
-${CVS} -z3 -d":pserver:anonymous@${repo}" \
-       co -d "${basename}" -r ":${rev}" -P "${rawname}"
-tar czf "${output}" "${basename}"
-rm -rf "${basename}"
+repodir="${basename}.tmp-cvs-checkout"
+tmp_output="$( mktemp "${output}.XXXXXX" )"
+
+cd "${BUILD_DIR}"
+# Remove leftovers from a previous failed run
+rm -rf "${repodir}"
+
+# Play tic-tac-toe with temp files
+# - first, we download to a trashable location (the build-dir)
+# - then we create a temporary tarball in the final location, so it is
+#   on the same filesystem as the final file
+# - finally, we atomically rename to the final file
+
+ret=1
+if ${CVS} -z3 -d":pserver:anonymous@${repo}" \
+           co -d "${repodir}" -r ":${rev}" -P "${rawname}"; then
+    if tar czf "${tmp_output}" "${repodir}"; then
+        mv "${tmp_output}" "${output}"
+        ret=0
+    fi
+fi
+
+# Cleanup
+rm -rf "${repodir}" "${tmp_output}"
+exit ${ret}
diff --git a/support/download/git b/support/download/git
index 5397096..badb491 100755
--- a/support/download/git
+++ b/support/download/git
@@ -10,15 +10,28 @@ set -e
 #   $3: package's basename (eg. foobar-1.2.3)
 #   $4: output file
 # And this environment:
-#   BR2_DL_DIR: path to Buildroot's download dir
-#   GIT       : the git command to call
+#   GIT      : the git command to call
+#   BUILD_DIR: path to Buildroot's build dir
 
 repo="${1}"
 cset="${2}"
 basename="${3}"
 output="${4}"
 
-repodir="${BR2_DL_DIR}/${basename}"
+repodir="${basename}.tmp-git-checkout"
+tmp_tar="$( mktemp "${BUILD_DIR}/.XXXXXX" )"
+tmp_output="$( mktemp "${output}.XXXXXX" )"
+
+# Play tic-tac-toe with temp files
+# - first, we download to a trashable location (the build-dir)
+# - then we create the uncomporessed tarball in tht same trashable location
+# - then we create a temporary compressed tarball in the final location, so
+#   it is on the same filesystem as the final file
+# - finally, we atomically rename to the final file
+
+cd "${BUILD_DIR}"
+# Remove leftovers from a previous failed run
+rm -rf "${repodir}"
 
 if [ -n "$(${GIT} ls-remote "${repo}" "${cset}" 2>&1)" ]; then
     printf "Doing shallow clone\n"
@@ -28,10 +41,16 @@ else
     ${GIT} clone --bare "${repo}" "${repodir}"
 fi
 
+ret=1
 pushd "${repodir}" >/dev/null
-${GIT} archive --prefix="${basename}/" -o "${output}.tmp" --format=tar "${cset}"
-gzip -c "${output}.tmp" >"${output}"
-rm -f "${output}.tmp"
+if ${GIT} archive --prefix="${basename}/" -o "${tmp_tar}" \
+                  --format=tar "${cset}"; then
+    if gzip -c "${tmp_tar}" >"${tmp_output}"; then
+        mv "${tmp_output}" "${output}"
+        ret=0
+    fi
+fi
 popd >/dev/null
 
-rm -rf "${repodir}"
+rm -rf "${repodir}" "${tmp_tar}" "${tmp_output}"
+exit ${ret}
diff --git a/support/download/hg b/support/download/hg
index d2e69c3..6e9e26b 100755
--- a/support/download/hg
+++ b/support/download/hg
@@ -10,16 +10,37 @@ set -e
 #   $3: package's basename (eg. foobar-1.2.3)
 #   $4: output file
 # And this environment:
-#   HG        : the hg command to call
-#   BR2_DL_DIR: path to Buildroot's download dir
+#   HG       : the hg command to call
+#   BUILD_DIR: path to Buildroot's build dir
 
 repo="${1}"
 cset="${2}"
 basename="${3}"
 output="${4}"
 
-cd "${BR2_DL_DIR}"
-${HG} clone --noupdate --rev "${cset}" "${repo}" "${basename}"
-${HG} archive --repository "${basename}" --type tgz --prefix "${basename}" \
-              --rev "${cset}" "${output}"
-rm -rf "${basename}"
+repodir="${basename}.tmp-hg-checkout"
+tmp_output="$( mktemp "${output}.XXXXXX" )"
+
+cd "${BUILD_DIR}"
+# Remove leftovers from a previous failed run
+rm -rf "${repodir}"
+
+# Play tic-tac-toe with temp files
+# - first, we download to a trashable location (the build-dir)
+# - then we create a temporary tarball in the final location, so it is
+#   on the same filesystem as the final file
+# - finally, we atomically rename to the final file
+
+ret=1
+if ${HG} clone --noupdate --rev "${cset}" "${repo}" "${repodir}"; then
+    if ${HG} archive --repository "${repodir}" --type tgz \
+                     --prefix "${basename}" --rev "${cset}" \
+                     "${tmp_output}"; then
+        mv "${tmp_output}" "${output}"
+        ret=0
+    fi
+fi
+
+# Cleanup
+rm -rf "${repodir}" "${tmp_output}"
+exit ${ret}
diff --git a/support/download/scp b/support/download/scp
index 2997927..d3aad43 100755
--- a/support/download/scp
+++ b/support/download/scp
@@ -12,5 +12,17 @@ set -e
 
 url="${1}"
 output="${2}"
+tmp_dl="$( mktemp "${BUILD_DIR}/.XXXXXX" )"
+tmp_output="$( mktemp "${output}.XXXXXX" )"
 
-${SCP} "${url}" "${output}"
+ret=1
+if ${SCP} "${url}" "${tmp_dl}"; then
+    if mv "${tmp_dl}" "${tmp_output}"; then
+        mv "${tmp_output}" "${output}"
+        ret=0
+    fi
+fi
+
+# Cleanup
+rm -f "${tmp_dl}" "${tmp_output}"
+exit ${ret}
diff --git a/support/download/svn b/support/download/svn
index 142a8d8..39cbbcb 100755
--- a/support/download/svn
+++ b/support/download/svn
@@ -10,16 +10,35 @@ set -e
 #   $3: package's basename (eg. foobar-1.2.3)
 #   $4: output file
 # And this environment:
-#   SVN       : the svn command to call
-#   BR2_DL_DIR: path to Buildroot's download dir
+#   SVN      : the svn command to call
+#   BUILD_DIR: path to Buildroot's build dir
 
 repo="${1}"
 rev="${2}"
 basename="${3}"
 output="${4}"
 
-pushd "${BR2_DL_DIR}" >/dev/null
-${SVN} export "${repo}@${rev}" "${basename}"
-tar czf "${output}" "${basename}"
-rm -rf "${basename}"
-popd >/dev/null
+repodir="${basename}.tmp-svn-checkout"
+tmp_output="$( mktemp "${output}.XXXXXX" )"
+
+cd "${BUILD_DIR}"
+# Remove leftovers from a previous failed run
+rm -rf "${repodir}"
+
+# Play tic-tac-toe with temp files
+# - first, we download to a trashable location (the build-dir)
+# - then we create a temporary tarball in the final location, so it is
+#   on the same filesystem as the final file
+# - finally, we atomically rename to the final file
+
+ret=1
+if ${SVN} export "${repo}@${rev}" "${repodir}"; then
+    if tar czf "${tmp_output}" "${repodir}"; then
+        mv "${tmp_output}" "${output}"
+        ret=0
+    fi
+fi
+
+# Cleanup
+rm -rf "${repodir}" "${tmp_output}"
+exit ${ret}
diff --git a/support/download/wget b/support/download/wget
index 91ffd10..cbeca3b 100755
--- a/support/download/wget
+++ b/support/download/wget
@@ -8,14 +8,28 @@ set -e
 #   $1: URL
 #   $2: output file
 # And this environment:
-#   WGET      : the wget command to call
+#   WGET     : the wget command to call
+#   BUILD_DIR: path to Buildroot's build dir
 
 url="${1}"
 output="${2}"
 
-if ${WGET} -O "${output}.tmp" "${url}"; then
-    mv "${output}.tmp" "${output}"
-else
-    rm -f "${output}.tmp"
-    exit 1
+tmp_dl="$( mktemp "${BUILD_DIR}/.XXXXXX" )"
+tmp_output="$( mktemp "${output}.XXXXXX" )"
+
+# Play tic-tac-toe with temp files
+# - first, we download to a trashable location (the build-dir)
+# - then we copy to a temporary tarball in the final location, so it is
+#   on the same filesystem as the final file
+# - finally, we atomically rename to the final file
+
+ret=1
+if ${WGET} -O "${tmp_dl}" "${url}"; then
+    if mv "${tmp_dl}" "${tmp_output}"; then
+        mv "${tmp_output}" "${output}"
+        ret=0
+    fi
 fi
+
+rm -f "${tmp_dl}" "${tmp_output}"
+exit ${ret}


More information about the buildroot mailing list