[Buildroot] [PATCH 1/1] Added stage2 ldscripts

Thierry Bultel thierry.bultel at wanadoo.fr
Thu Nov 21 10:04:25 UTC 2013


Le 21/11/2013 09:13, Thomas Petazzoni a écrit :
> Dear Thierry Bultel,
>
> On Wed, 20 Nov 2013 23:33:28 +0100, Thierry Bultel wrote:
>> When building stage2 with binutils >= 2.19.1, grub says it is corrupted
>> I have not tried to downgrade binutils to that version, since buildroot
>> offers 2.20.1 as oldest. The issue was reproduced with 2.23.2.
>>
>> The following patch is clearly not mine.
>> I have found it at that location https://dev.openwrt.org/ticket/10444
>> where the issue is described, and the patch offered.
>>
>> Successfully tested with an iso image in kvm, that else would hang on
>> "Loading stage2 ..."
>>
>> Signed-off-by: Thierry Bultel <thierry.bultel at wanadoo.fr>
>> ---
>>   boot/grub/grub.500-add-stage2-ldscripts.patch |   58 +++++++++++++++++++++++++
>>   1 files changed, 58 insertions(+), 0 deletions(-)
>>   create mode 100644 boot/grub/grub.500-add-stage2-ldscripts.patch
>
> This is weird, because I've built and run grub with the CodeSourcery
> x86 toolchain, and the Buildroot toolchain (while testing my
> http://lists.busybox.net/pipermail/buildroot/2013-November/082351.html
> patch series), and it was just working fine.
>

FYI my configuration uses Buildroot toolchain/binutils 2.23.2/gcc-4.7.x

> Note however that
> http://lists.busybox.net/pipermail/buildroot/2013-November/082365.html
> makes a number of changes in the CFLAGS used to build Grub.
>
> I've just pushed this branch (rebased on top of master) at:
>
>    http://git.free-electrons.com/users/thomas-petazzoni/buildroot/log/?h=x86-stuff
>
> Could you try this branch and see if it fixes the problem for you?

I have taken your branch and compiled it. I am testing like this:

sudo kvm -cdrom rootfs.iso9660

which works with upstream + the lscript patch

However, on your branch, the grub menu does not show up, I am only 
getting the grub minimal prompt. For the moment I cannot figure out why.

So that would mean that stage2 is OK but there is another extra issue.

Thierry

>
> Thanks a lot!
>
> Thomas
>




More information about the buildroot mailing list