[Buildroot] Patch for re-activating rshd and rlogind build

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Fri Nov 8 15:02:45 UTC 2013


Hello,

Can you resend a non-HTML e-mail? Your patch is unfortunately
completely unusable as it is :-(

Thanks a lot!

Thomas

On Fri, 8 Nov 2013 15:32:05 +0100 (CET), universeII at gmx.de wrote:

> when trying to setup my target system to start rshd I figured out
> some problems. Below you can find a description and and patch to fix
> the problems. Result is a working rshd and rlogind. Please no
> comments like "use ssh, that's more secure". Usage of rsh is
> mandatory in my setup as the existing and qualified test system uses
> rsh to perform software tests on the target. Changing the test system
> is no option (due to qualification effort). I found out that build of
> rshd and rlogind is commented out in Config.in of package rsh-redone.
> Re-activating them lead to compile errors of the rsh-redone package
> (when linking with pam). After a while I found the root cause. The
> make targets are wrong: rshd and rlogind must be replaces by in.rshd
> and in.rlogind. With these changes rshd and rlogind are compiled and
> are running fine on my target. Just activate them in inetd.conf and
> adjust some PAM settings. That's all. Please let me know, if you need
> more details or if the patch is in a wrong format (this is my first
> patch contribution). Regards, Andreas P.S.: I did not succeed in
> re-activating rcp as there is an compile error in the rsh-redone
> sources. diff -purN rsh-redone_org/Config.in rsh-redone/Config.in ---
> rsh-redone_org/Config.in    2013-09-17 13:42:07.000000000 +0200 +++
> rsh-redone/Config.in        2013-10-24 08:22:47.324184620 +0200 @@
> -17,15 +17,15 @@ config BR2_PACKAGE_RSH_REDONE_RLOGIN         depends
> on BR2_PACKAGE_RSH_REDONE    # requires PAM -#config
> BR2_PACKAGE_RSH_REDONE_RLOGIND -#      bool "rlogind" -#      depends
> on BR2_PACKAGE_RSH_REDONE +config BR2_PACKAGE_RSH_REDONE_RLOGIND
> +       bool "rlogind" +       depends on BR2_PACKAGE_RSH_REDONE
> config BR2_PACKAGE_RSH_REDONE_RSH         bool "rsh"         depends
> on BR2_PACKAGE_RSH_REDONE    # requires PAM -#config
> BR2_PACKAGE_RSH_REDONE_RSHD -#      bool "rshd" -#      depends on
> BR2_PACKAGE_RSH_REDONE +config BR2_PACKAGE_RSH_REDONE_RSHD +
> bool "rshd" +       depends on BR2_PACKAGE_RSH_REDONE diff -purN
> rsh-redone_org/rsh-redone.mk rsh-redone/rsh-redone.mk ---
> rsh-redone_org/rsh-redone.mk        2013-09-17 13:42:07.000000000
> +0200 +++ rsh-redone/rsh-redone.mk    2013-10-24 08:23:00.643065545
> +0200 @@ -13,8 +13,8 @@ rsh-redone-bin-$(BR2_PACKAGE_RSH_REDONE_
> rsh-redone-bin-$(BR2_PACKAGE_RSH_REDONE_RLOGIN) += rlogin
> rsh-redone-bin-$(BR2_PACKAGE_RSH_REDONE_RSH) += rsh
> rsh-redone-sbin-y =
> -rsh-redone-sbin-$(BR2_PACKAGE_RSH_REDONE_RLOGIND) += rlogind
> -rsh-redone-sbin-$(BR2_PACKAGE_RSH_REDONE_RSHD) += rshd
> +rsh-redone-sbin-$(BR2_PACKAGE_RSH_REDONE_RLOGIND) += in.rlogind
> +rsh-redone-sbin-$(BR2_PACKAGE_RSH_REDONE_RSHD) += in.rshd
> define RSH_REDONE_BUILD_CMDS         $(TARGET_CONFIGURE_OPTS)
> $(MAKE) -C $(@D) BIN="$(rsh-redone-bin-y)"
> SBIN="$(rsh-redone-sbin-y)" 



-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com



More information about the buildroot mailing list