[Buildroot] Toolchain generate invalid executable format

Marc Leclerc marc-leclerc at signaturealpha.com
Fri Sep 16 11:07:59 UTC 2011


Hi,

BR2_i386=y
BR2_x86_i486=y


BR2_GCC_TARGET_TUNE="i486"
BR2_GCC_TARGET_ARCH="i486"

Thanks

On 2011-09-16 01:36, Thomas De Schampheleire wrote:
> Hi,
>
> On Thu, Sep 15, 2011 at 10:57 PM, Marc Leclerc
> <marc-leclerc at signaturealpha.com>  wrote:
>> Hi,
>>
>> Finally got a working environment after going back to the version of tools I
>> had on my previous setup beside the kernel (now 3.0.4)
>>
>> One big problem though when I compile my application from my workstation
>> using the buildroot toolchain it no longer runs on my target leaving an
>> illegal instruction message. gdb (6.8) say the file format is not
>> recognized. if i take the same app compiled with my previous setup it runs
>> fine (no changes have been made to the source, only had to change the PATH
>> (to the compiler) since it changed from the buildroot version I was using.
> What architecture is your target?
> What is the output of 'file<your-application>' ?
>
>> Here is my buildroot .config, hopefully this is only caused by a change in
>> default configuration
>>
>> Thanks
>>
>> #
>> # Automatically generated make config: don't edit
>> # Buildroot 2011.08 Configuration
>> # Thu Sep 15 14:57:25 2011
>> #
>> BR2_HAVE_DOT_CONFIG=y
>> # BR2_arm is not set
>> # BR2_armeb is not set
>> # BR2_avr32 is not set
>> # BR2_bfin is not set
>> BR2_i386=y
>> # BR2_mips is not set
>> # BR2_mipsel is not set
>> # BR2_powerpc is not set
>> # BR2_sh is not set
>> # BR2_sh64 is not set
>> # BR2_sparc is not set
>> # BR2_x86_64 is not set
>> # BR2_xtensa is not set
>> # BR2_x86_i386 is not set
>> BR2_x86_i486=y
>> # BR2_x86_i586 is not set
>> # BR2_x86_i686 is not set
>> # BR2_x86_pentiumpro is not set
>> # BR2_x86_pentium_mmx is not set
>> # BR2_x86_pentium_m is not set
>> # BR2_x86_pentium2 is not set
>> # BR2_x86_pentium3 is not set
>> # BR2_x86_pentium4 is not set
>> # BR2_x86_prescott is not set
>> # BR2_x86_nocona is not set
>> # BR2_x86_core2 is not set
>> # BR2_x86_k6 is not set
>> # BR2_x86_k6_2 is not set
>> # BR2_x86_athlon is not set
>> # BR2_x86_athlon_4 is not set
>> # BR2_x86_opteron is not set
>> # BR2_x86_opteron_sse3 is not set
>> # BR2_x86_barcelona is not set
>> # BR2_x86_geode is not set
>> # BR2_x86_c3 is not set
>> # BR2_x86_c32 is not set
>> # BR2_x86_winchip_c6 is not set
>> # BR2_x86_winchip2 is not set
>> BR2_ARCH="i486"
>> BR2_ENDIAN="LITTLE"
>> BR2_GCC_TARGET_TUNE="i486"
>> BR2_GCC_TARGET_ARCH="i486"
>>
>> #
>> # Build options
>> #
>>
>> #
>> # Commands
>> #
>> BR2_WGET="wget --passive-ftp -nd -t 3"
>> BR2_SVN="svn"
>> BR2_BZR="bzr"
>> BR2_GIT="git"
>> BR2_ZCAT="gzip -d -c"
>> BR2_BZCAT="bzcat"
>> BR2_XZCAT="xzcat"
>> BR2_TAR_OPTIONS=""
>> BR2_DL_DIR="$(TOPDIR)/dl"
>> BR2_HOST_DIR="$(BASE_DIR)/host"
>>
>> #
>> # Mirrors and Download locations
>> #
>> BR2_PRIMARY_SITE=""
>> BR2_BACKUP_SITE="http://sources.buildroot.net/"
>> BR2_SOURCEFORGE_MIRROR="kent"
>> BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
>> BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
>> BR2_DEBIAN_MIRROR="http://ftp.debian.org"
>> BR2_JLEVEL=2
>> # BR2_CCACHE is not set
>> # BR2_DEPRECATED is not set
>> # BR2_ENABLE_DEBUG is not set
>> BR2_STRIP_strip=y
>> # BR2_STRIP_sstrip is not set
>> # BR2_STRIP_none is not set
>> # BR2_OPTIMIZE_0 is not set
>> # BR2_OPTIMIZE_1 is not set
>> # BR2_OPTIMIZE_2 is not set
>> # BR2_OPTIMIZE_3 is not set
>> BR2_OPTIMIZE_S=y
>> # BR2_PREFER_STATIC_LIB is not set
>> # BR2_HAVE_DOCUMENTATION is not set
>> # BR2_HAVE_DEVFILES is not set
>>
>> #
>> # Toolchain
>> #
>> BR2_TOOLCHAIN_BUILDROOT=y
>> # BR2_TOOLCHAIN_EXTERNAL is not set
>> # BR2_TOOLCHAIN_CTNG is not set
>>
>> #
>> # Kernel Header Options
>> #
>> # BR2_KERNEL_HEADERS_2_6_35 is not set
>> # BR2_KERNEL_HEADERS_2_6_36 is not set
>> # BR2_KERNEL_HEADERS_2_6_37 is not set
>> # BR2_KERNEL_HEADERS_2_6_38 is not set
>> # BR2_KERNEL_HEADERS_2_6_39 is not set
>> BR2_KERNEL_HEADERS_3_0=y
>> # BR2_KERNEL_HEADERS_VERSION is not set
>> # BR2_KERNEL_HEADERS_SNAP is not set
>> BR2_DEFAULT_KERNEL_HEADERS="3.0.4"
>>
>> #
>> # uClibc Options
>> #
>> # BR2_UCLIBC_VERSION_0_9_31 is not set
>> BR2_UCLIBC_VERSION_0_9_32=y
>> # BR2_UCLIBC_VERSION_SNAPSHOT is not set
>> BR2_UCLIBC_VERSION_STRING="0.9.32"
>> BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.32.config"
>> # BR2_PTHREAD_DEBUG is not set
>> # BR2_UCLIBC_INSTALL_TEST_SUITE is not set
>>
>> #
>> # Binutils Options
>> #
>> # BR2_BINUTILS_VERSION_2_20 is not set
>> BR2_BINUTILS_VERSION_2_20_1=y
>> # BR2_BINUTILS_VERSION_2_21 is not set
>> # BR2_BINUTILS_VERSION_2_21_1 is not set
>> BR2_BINUTILS_VERSION="2.20.1"
>> BR2_BINUTILS_EXTRA_CONFIG_OPTIONS=""
>>
>> #
>> # GCC Options
>> #
>> # BR2_GCC_VERSION_4_2_4 is not set
>> BR2_GCC_VERSION_4_3_X=y
>> # BR2_GCC_VERSION_4_4_X is not set
>> # BR2_GCC_VERSION_4_5_X is not set
>> # BR2_GCC_VERSION_4_6_X is not set
>> # BR2_GCC_VERSION_SNAP is not set
>> BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
>> BR2_GCC_VERSION="4.3.6"
>> BR2_EXTRA_GCC_CONFIG_OPTIONS=""
>> # BR2_INSTALL_OBJC is not set
>> # BR2_INSTALL_FORTRAN is not set
>> # BR2_GCC_SHARED_LIBGCC is not set
>> # BR2_GCC_ENABLE_OPENMP is not set
>>
>> #
>> # Gdb Options
>> #
>> BR2_PACKAGE_GDB=y
>> BR2_PACKAGE_GDB_SERVER=y
>> # BR2_PACKAGE_GDB_HOST is not set
>> # BR2_GDB_VERSION_6_7_1 is not set
>> BR2_GDB_VERSION_6_8=y
>> # BR2_GDB_VERSION_7_0_1 is not set
>> # BR2_GDB_VERSION_7_1 is not set
>> BR2_GDB_VERSION="6.8"
>> BR2_LARGEFILE=y
>> BR2_INET_IPV6=y
>> BR2_INET_RPC=y
>> BR2_USE_WCHAR=y
>> BR2_ENABLE_LOCALE=y
>> BR2_TOOLCHAIN_HAS_THREADS=y
>> BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y
>> # BR2_ENABLE_LOCALE_PURGE is not set
>> BR2_NEEDS_GETTEXT=y
>> BR2_NEEDS_GETTEXT_IF_LOCALE=y
>> BR2_USE_MMU=y
>> BR2_TARGET_OPTIMIZATION="-pipe"
>> BR2_TARGET_LDFLAGS=""
>>
>> #
>> # Toolchain Options
>> #
>> BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
>> BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
>> BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
>> BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
>> BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
>> # BR2_TOOLCHAIN_BUILDROOT_CXX is not set
>> # BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set
>> # BR2_PTHREADS_NONE is not set
>> # BR2_PTHREADS is not set
>> BR2_PTHREADS_OLD=y
>> # BR2_PTHREADS_NATIVE is not set
>>
>> #
>> # System configuration
>> #
>> BR2_TARGET_GENERIC_HOSTNAME="buildroot"
>> BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot"
>> BR2_ROOTFS_DEVICE_CREATION_STATIC=y
>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set
>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set
>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV is not set
>> BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt"
>> BR2_ROOTFS_STATIC_DEVICE_TABLE="target/generic/device_table_dev.txt"
>> BR2_ROOTFS_SKELETON_DEFAULT=y
>> # BR2_ROOTFS_SKELETON_CUSTOM is not set
>> BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set
>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
>> BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
>> BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
>> BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
>> BR2_ROOTFS_POST_BUILD_SCRIPT="custom/copy_etc.sh"
>>
>> #
>> # Package Selection for the target
>> #
>> BR2_PACKAGE_BUSYBOX=y
>> # BR2_BUSYBOX_VERSION_1_16_X is not set
>> # BR2_BUSYBOX_VERSION_1_17_X is not set
>> BR2_BUSYBOX_VERSION_1_18_X=y
>> # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
>> BR2_BUSYBOX_VERSION="1.18.5"
>> BR2_PACKAGE_BUSYBOX_CONFIG="vortex86/busybox.config"
>> BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
>> # BR2_PACKAGE_CUSTOMIZE is not set
>>
>> #
>> # Audio and video libraries and applications
>> #
>> # BR2_PACKAGE_ALSA_LIB is not set
>> # BR2_PACKAGE_ALSA_UTILS is not set
>> # BR2_PACKAGE_AUMIX is not set
>> # BR2_PACKAGE_FAAD2 is not set
>> # BR2_PACKAGE_FLAC is not set
>> # BR2_PACKAGE_FFMPEG is not set
>> # BR2_PACKAGE_GSTREAMER is not set
>> # BR2_PACKAGE_LAME is not set
>> # BR2_PACKAGE_LIBAO is not set
>> # BR2_PACKAGE_LIBCDAUDIO is not set
>> # BR2_PACKAGE_LIBCUE is not set
>> # BR2_PACKAGE_LIBCUEFILE is not set
>> # BR2_PACKAGE_LIBDVDREAD is not set
>> # BR2_PACKAGE_LIBDVDNAV is not set
>> # BR2_PACKAGE_LIBID3TAG is not set
>> # BR2_PACKAGE_LIBMAD is not set
>> # BR2_PACKAGE_LIBMMS is not set
>> # BR2_PACKAGE_LIBMPD is not set
>> # BR2_PACKAGE_LIBMPEG2 is not set
>> # BR2_PACKAGE_LIBOGG is not set
>> # BR2_PACKAGE_LIBREPLAYGAIN is not set
>> # BR2_PACKAGE_LIBSAMPLERATE is not set
>> # BR2_PACKAGE_LIBSNDFILE is not set
>> # BR2_PACKAGE_LIBTHEORA is not set
>> # BR2_PACKAGE_LIBVORBIS is not set
>>
>> #
>> # Live555 needs C++ compiler
>> #
>> # BR2_PACKAGE_MADPLAY is not set
>>
>> #
>> # mpd requires a toolchain with C++ and WCHAR support
>> #
>> # BR2_PACKAGE_MPG123 is not set
>> # BR2_PACKAGE_MPLAYER is not set
>> # BR2_PACKAGE_MUSEPACK is not set
>> # BR2_PACKAGE_SPEEX is not set
>>
>> #
>> # swfdec requires a toolchain with WCHAR and C++ support
>> #
>>
>> #
>> # taglib requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_TREMOR is not set
>> # BR2_PACKAGE_VORBIS_TOOLS is not set
>> # BR2_PACKAGE_WAVPACK is not set
>>
>> #
>> # Compressors and decompressors
>> #
>> # BR2_PACKAGE_BZIP2 is not set
>> # BR2_PACKAGE_GZIP is not set
>> # BR2_PACKAGE_LZOP is not set
>> # BR2_PACKAGE_XZ is not set
>>
>> #
>> # Debugging, profiling and benchmark
>> #
>>
>> #
>> # bonnie++ requires a toolchain with C++ support enabled
>> #
>> BR2_PACKAGE_DHRYSTONE=y
>> # BR2_PACKAGE_DMALLOC is not set
>> # BR2_PACKAGE_KEXEC is not set
>> BR2_PACKAGE_LMBENCH=y
>> BR2_PACKAGE_LSOF=y
>> # BR2_PACKAGE_LTP_TESTSUITE is not set
>> BR2_PACKAGE_LTRACE=y
>> BR2_PACKAGE_MEMSTAT=y
>> # BR2_PACKAGE_NETPERF is not set
>>
>> #
>> # oprofile requires a toolchain with C++ support enabled
>> #
>> BR2_PACKAGE_STRACE=y
>> # BR2_PACKAGE_WHETSTONE is not set
>> # BR2_PACKAGE_VALGRIND is not set
>>
>> #
>> # Development tools
>> #
>> # BR2_PACKAGE_AUTOCONF is not set
>> # BR2_PACKAGE_AUTOMAKE is not set
>> # BR2_PACKAGE_BINUTILS is not set
>> # BR2_PACKAGE_BISON is not set
>> # BR2_PACKAGE_BSDIFF is not set
>> # BR2_PACKAGE_CCACHE is not set
>> # BR2_PACKAGE_COREUTILS is not set
>> # BR2_PACKAGE_CVS is not set
>> # BR2_PACKAGE_DIFFUTILS is not set
>> # BR2_PACKAGE_DISTCC is not set
>> # BR2_PACKAGE_FINDUTILS is not set
>> # BR2_PACKAGE_FLEX is not set
>> # BR2_PACKAGE_GAWK is not set
>>
>> #
>> # gcc needs development files in target filesystem
>> #
>> # BR2_PACKAGE_GETTEXT is not set
>> # BR2_PACKAGE_LIBINTL is not set
>> # BR2_PACKAGE_GMP is not set
>>
>> #
>> # gperf requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_GREP is not set
>> # BR2_PACKAGE_MAKE is not set
>> # BR2_PACKAGE_MPC is not set
>> # BR2_PACKAGE_MPFR is not set
>> # BR2_PACKAGE_LIBTOOL is not set
>> # BR2_PACKAGE_M4 is not set
>> # BR2_PACKAGE_PATCH is not set
>> # BR2_PACKAGE_PKG_CONFIG is not set
>> # BR2_PACKAGE_SED is not set
>> # BR2_PACKAGE_SSTRIP is not set
>> # BR2_PACKAGE_TAR is not set
>>
>> #
>> # Games
>> #
>> # BR2_PACKAGE_GNUCHESS is not set
>> # BR2_PACKAGE_PRBOOM is not set
>>
>> #
>> # Graphic libraries and applications (graphic/text)
>> #
>>
>> #
>> # Graphic applications
>> #
>> # BR2_PACKAGE_RRDTOOL is not set
>>
>> #
>> # graphic libraries
>> #
>> # BR2_PACKAGE_DIRECTFB is not set
>> # BR2_PACKAGE_FBDUMP is not set
>> # BR2_PACKAGE_FBGRAB is not set
>> # BR2_PACKAGE_FBSET is not set
>> # BR2_PACKAGE_FBV is not set
>> # BR2_PACKAGE_IMAGEMAGICK is not set
>> # BR2_PACKAGE_LINUX_FUSION is not set
>> # BR2_PACKAGE_SDL is not set
>>
>> #
>> # other GUIs
>> #
>>
>> #
>> # qt requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_XORG7 is not set
>>
>> #
>> # X libraries and helper libraries
>> #
>> # BR2_PACKAGE_LIBERATION is not set
>>
>> #
>> # X Window managers
>> #
>>
>> #
>> # X applications
>> #
>> # BR2_PACKAGE_GOB2 is not set
>>
>> #
>> # midori requires C++, WCHAR in toolchain and libgtk2
>> #
>>
>> #
>> # Hardware handling
>> #
>> # BR2_PACKAGE_ACPID is not set
>> # BR2_PACKAGE_CDRKIT is not set
>> # BR2_PACKAGE_CRAMFS is not set
>>
>> #
>> # dbus not available (need expat or libxml2)
>> #
>> # BR2_PACKAGE_DMRAID is not set
>> # BR2_PACKAGE_DOSFSTOOLS is not set
>> BR2_PACKAGE_E2FSPROGS=y
>> BR2_PACKAGE_E2FSPROGS_BADBLOCKS=y
>> BR2_PACKAGE_E2FSPROGS_CHATTR=y
>> # BR2_PACKAGE_E2FSPROGS_DEBUGFS is not set
>> BR2_PACKAGE_E2FSPROGS_DUMPE2FS=y
>> BR2_PACKAGE_E2FSPROGS_E2FREEFRAG=y
>> BR2_PACKAGE_E2FSPROGS_E2FSCK=y
>> # BR2_PACKAGE_E2FSPROGS_E2IMAGE is not set
>> BR2_PACKAGE_E2FSPROGS_E2LABEL=y
>> BR2_PACKAGE_E2FSPROGS_E2UNDO=y
>> BR2_PACKAGE_E2FSPROGS_FILEFRAG=y
>> BR2_PACKAGE_E2FSPROGS_FINDFS=y
>> BR2_PACKAGE_E2FSPROGS_FSCK=y
>> BR2_PACKAGE_E2FSPROGS_LOGSAVE=y
>> BR2_PACKAGE_E2FSPROGS_LSATTR=y
>> BR2_PACKAGE_E2FSPROGS_MKE2FS=y
>> BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND=y
>> # BR2_PACKAGE_E2FSPROGS_RESIZE2FS is not set
>> BR2_PACKAGE_E2FSPROGS_TUNE2FS=y
>> BR2_PACKAGE_E2FSPROGS_UUIDGEN=y
>> BR2_PACKAGE_E2FSPROGS_UUIDD=y
>> # BR2_PACKAGE_EEPROG is not set
>> # BR2_PACKAGE_FCONFIG is not set
>> # BR2_PACKAGE_FIS is not set
>> # BR2_PACKAGE_GADGETFS_TEST is not set
>>
>> #
>> # gdisk requires a toolchain with LARGEFILE/WCHAR/C++ support enabled
>> #
>> # BR2_PACKAGE_GENEXT2FS is not set
>> # BR2_PACKAGE_GENROMFS is not set
>> # BR2_PACKAGE_GPSD is not set
>> # BR2_PACKAGE_GVFS is not set
>> # BR2_PACKAGE_HDPARM is not set
>> # BR2_PACKAGE_HWDATA is not set
>> # BR2_PACKAGE_I2C_TOOLS is not set
>> # BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
>> # BR2_PACKAGE_INPUT_TOOLS is not set
>> BR2_PACKAGE_IOSTAT=y
>> # BR2_PACKAGE_IRDA_UTILS is not set
>> # BR2_PACKAGE_KBD is not set
>> # BR2_PACKAGE_LIBV4L is not set
>> # BR2_PACKAGE_LM_SENSORS is not set
>> # BR2_PACKAGE_LSUIO is not set
>> # BR2_PACKAGE_LVM2 is not set
>> BR2_PACKAGE_MAKEDEVS=y
>> # BR2_PACKAGE_MDADM is not set
>> # BR2_PACKAGE_MEMTESTER is not set
>> # BR2_PACKAGE_MTD is not set
>> # BR2_PACKAGE_NTFS_3G is not set
>> # BR2_PACKAGE_NTFSPROGS is not set
>> BR2_PACKAGE_PCIUTILS=y
>> # BR2_PACKAGE_RNG_TOOLS is not set
>> # BR2_PACKAGE_SDPARM is not set
>> BR2_PACKAGE_SETSERIAL=y
>>
>> #
>> # smartmontools requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_SQUASHFS is not set
>> # BR2_PACKAGE_SREDIRD is not set
>> # BR2_PACKAGE_SSHFS is not set
>> BR2_PACKAGE_STATSERIAL=y
>> # BR2_PACKAGE_SYSSTAT is not set
>> # BR2_PACKAGE_TI_UTILS is not set
>> # BR2_PACKAGE_UBOOT_TOOLS is not set
>>
>> #
>> # udev requires /dev mgmnt set to udev under System configuration
>> #
>> # BR2_PACKAGE_USB_MODESWITCH is not set
>> # BR2_PACKAGE_USBUTILS is not set
>> # BR2_PACKAGE_WIPE is not set
>> # BR2_PACKAGE_XFSPROGS is not set
>>
>> #
>> # Interpreter languages and scripting
>> #
>> # BR2_PACKAGE_HASERL is not set
>> # BR2_PACKAGE_LUA is not set
>> # BR2_PACKAGE_MICROPERL is not set
>> # BR2_PACKAGE_PHP is not set
>> # BR2_PACKAGE_PYTHON is not set
>> # BR2_PACKAGE_RUBY is not set
>> # BR2_PACKAGE_TCL is not set
>>
>> #
>> # Libraries
>> #
>>
>> #
>> # Compression and decompression
>> #
>> # BR2_PACKAGE_LIBARCHIVE is not set
>> # BR2_PACKAGE_LZO is not set
>> BR2_PACKAGE_ZLIB=y
>>
>> #
>> # Crypto
>> #
>> # BR2_PACKAGE_BEECRYPT is not set
>> # BR2_PACKAGE_GNUTLS is not set
>> # BR2_PACKAGE_LIBGCRYPT is not set
>> # BR2_PACKAGE_LIBGPG_ERROR is not set
>> # BR2_PACKAGE_LIBNSS is not set
>> # BR2_PACKAGE_OPENSSL is not set
>>
>> #
>> # Database
>> #
>> # BR2_PACKAGE_BERKELEYDB is not set
>>
>> #
>> # Mysql client requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_SQLITE is not set
>>
>> #
>> # Filesystem
>> #
>> # BR2_PACKAGE_GAMIN is not set
>> # BR2_PACKAGE_LIBCONFIG is not set
>> # BR2_PACKAGE_LIBCONFUSE is not set
>> # BR2_PACKAGE_LIBFUSE is not set
>> # BR2_PACKAGE_LIBLOCKFILE is not set
>> # BR2_PACKAGE_LIBSYSFS is not set
>>
>> #
>> # Graphics
>> #
>> # BR2_PACKAGE_ATK is not set
>> # BR2_PACKAGE_CAIRO is not set
>> # BR2_PACKAGE_FONTCONFIG is not set
>> # BR2_PACKAGE_FREETYPE is not set
>> # BR2_PACKAGE_JPEG is not set
>> # BR2_PACKAGE_LIBART is not set
>> # BR2_PACKAGE_LIBEXIF is not set
>> # BR2_PACKAGE_GDK_PIXBUF is not set
>>
>> #
>> # libgtk2 requires a toolchain with WCHAR and C++ support
>> #
>> # BR2_PACKAGE_LIBPNG is not set
>>
>> #
>> # libraw requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_LIBSVGTINY is not set
>> # BR2_PACKAGE_LIBUNGIF is not set
>>
>> #
>> # pango requires a toolchain with WCHAR and C++ support
>> #
>> # BR2_PACKAGE_PIXMAN is not set
>> # BR2_PACKAGE_TIFF is not set
>>
>> #
>> # webkit requires C++, WCHAR in toolchain and libgtk2
>> #
>>
>> #
>> # Hardware handling
>> #
>> # BR2_PACKAGE_LIBAIO is not set
>> # BR2_PACKAGE_LIBRAW1394 is not set
>> # BR2_PACKAGE_TSLIB is not set
>> # BR2_PACKAGE_LIBHID is not set
>> # BR2_PACKAGE_LIBIQRF is not set
>> # BR2_PACKAGE_LIBUSB is not set
>>
>> #
>> # Networking
>> #
>> # BR2_PACKAGE_LIBCGI is not set
>>
>> #
>> # libcgicc requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_LIBCURL is not set
>> # BR2_PACKAGE_LIBDNET is not set
>> # BR2_PACKAGE_LIBEXOSIP2 is not set
>> # BR2_PACKAGE_LIBIDN is not set
>> # BR2_PACKAGE_LIBMICROHTTPD is not set
>> # BR2_PACKAGE_NEON is not set
>> # BR2_PACKAGE_LIBMNL is not set
>> # BR2_PACKAGE_LIBNL is not set
>> # BR2_PACKAGE_LIBPCAP is not set
>> # BR2_PACKAGE_LIBOSIP2 is not set
>> # BR2_PACKAGE_LIBRSYNC is not set
>> # BR2_PACKAGE_LIBSOUP is not set
>> # BR2_PACKAGE_LIBUPNP is not set
>>
>> #
>> # Other
>> #
>> # BR2_PACKAGE_LIBARGTABLE2 is not set
>> # BR2_PACKAGE_ARGP_STANDALONE is not set
>> # BR2_PACKAGE_LIBATOMIC_OPS is not set
>> # BR2_PACKAGE_LIBCAP is not set
>> # BR2_PACKAGE_LIBDAEMON is not set
>> BR2_PACKAGE_LIBELF=y
>> # BR2_PACKAGE_LIBEVENT is not set
>> # BR2_PACKAGE_LIBFFI is not set
>> # BR2_PACKAGE_LIBGLIB2 is not set
>> # BR2_PACKAGE_LIBNSPR is not set
>>
>> #
>> # libsigc++ requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_ORC is not set
>>
>> #
>> # Text and terminal handling
>> #
>>
>> #
>> # enchant requires a toolchain with C++ and WCHAR support enabled
>> #
>>
>> #
>> # icu requires a toolchain with C++ support and WCHAR enabled
>> #
>> BR2_PACKAGE_NCURSES=y
>> # BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
>> # BR2_PACKAGE_NCURSES_TARGET_FORM is not set
>> # BR2_PACKAGE_NCURSES_TARGET_MENU is not set
>> # BR2_PACKAGE_NEWT is not set
>> # BR2_PACKAGE_PCRE is not set
>> # BR2_PACKAGE_POPT is not set
>> # BR2_PACKAGE_READLINE is not set
>> # BR2_PACKAGE_SLANG is not set
>>
>> #
>> # JSON/XML
>> #
>> # BR2_PACKAGE_EXPAT is not set
>> # BR2_PACKAGE_EZXML is not set
>> # BR2_PACKAGE_LIBROXML is not set
>> # BR2_PACKAGE_LIBXML2 is not set
>> # BR2_PACKAGE_LIBXSLT is not set
>> # BR2_PACKAGE_LIBYAML is not set
>> # BR2_PACKAGE_MXML is not set
>>
>> #
>> # xerces-c++ requires a toolchain with C++ and WCHAR support enabled
>> #
>> # BR2_PACKAGE_YAJL is not set
>>
>> #
>> # Miscellaneous
>> #
>> # BR2_PACKAGE_SHARED_MIME_INFO is not set
>>
>> #
>> # Networking applications
>> #
>> # BR2_PACKAGE_ARGUS is not set
>> # BR2_PACKAGE_AVAHI is not set
>> # BR2_PACKAGE_AXEL is not set
>> # BR2_PACKAGE_BOA is not set
>> # BR2_PACKAGE_BIND is not set
>> # BR2_PACKAGE_BMON is not set
>> # BR2_PACKAGE_BRIDGE is not set
>> # BR2_PACKAGE_BWM_NG is not set
>> # BR2_PACKAGE_CAN_UTILS is not set
>>
>> #
>> # ctorrent requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_CUPS is not set
>> # BR2_PACKAGE_DHCP is not set
>> # BR2_PACKAGE_DHCPDUMP is not set
>> # BR2_PACKAGE_DNSMASQ is not set
>> BR2_PACKAGE_DROPBEAR=y
>> # BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS is not set
>> # BR2_PACKAGE_DROPBEAR_SMALL is not set
>> # BR2_PACKAGE_EBTABLES is not set
>> # BR2_PACKAGE_ETHTOOL is not set
>> # BR2_PACKAGE_HOSTAPD is not set
>> # BR2_PACKAGE_IFPLUGD is not set
>>
>> #
>> # iperf requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_IPROUTE2 is not set
>> # BR2_PACKAGE_IPSEC_TOOLS is not set
>> # BR2_PACKAGE_IPSET is not set
>> # BR2_PACKAGE_IPTABLES is not set
>> # BR2_PACKAGE_IW is not set
>>
>> #
>> # Kismet requires a toolchain with C++ support enabled
>> #
>> # BR2_PACKAGE_XL2TP is not set
>> # BR2_PACKAGE_LIGHTTPD is not set
>> # BR2_PACKAGE_LINKS is not set
>> # BR2_PACKAGE_LRZSZ is not set
>> # BR2_PACKAGE_MII_DIAG is not set
>> # BR2_PACKAGE_MROUTED is not set
>> # BR2_PACKAGE_MUTT is not set
>> # BR2_PACKAGE_NBD is not set
>> # BR2_PACKAGE_NCFTP is not set
>> # BR2_PACKAGE_NETCAT is not set
>> # BR2_PACKAGE_NETKITBASE is not set
>> # BR2_PACKAGE_NETKITTELNET is not set
>> # BR2_PACKAGE_NETPLUG is not set
>> # BR2_PACKAGE_NETSNMP is not set
>> # BR2_PACKAGE_NETSTAT_NAT is not set
>> # BR2_PACKAGE_NFS_UTILS is not set
>> # BR2_PACKAGE_NGIRCD is not set
>> BR2_PACKAGE_NTP=y
>> # BR2_PACKAGE_NTP_SNTP is not set
>> # BR2_PACKAGE_NTP_NTP_KEYGEN is not set
>> BR2_PACKAGE_NTP_NTPD=y
>> BR2_PACKAGE_NTP_NTPDATE=y
>> # BR2_PACKAGE_NTP_NTPDC is not set
>> BR2_PACKAGE_NTP_NTPQ=y
>> BR2_PACKAGE_NTP_TICKADJ=y
>> # BR2_PACKAGE_NUTTCP is not set
>> # BR2_PACKAGE_OLSR is not set
>> # BR2_PACKAGE_OPENNTPD is not set
>> # BR2_PACKAGE_OPENSSH is not set
>> # BR2_PACKAGE_OPENVPN is not set
>> # BR2_PACKAGE_PORTMAP is not set
>> # BR2_PACKAGE_PPPD is not set
>> # BR2_PACKAGE_RADVD is not set
>> # BR2_PACKAGE_PPTP_LINUX is not set
>> # BR2_PACKAGE_PROFTPD is not set
>> # BR2_PACKAGE_QUAGGA is not set
>> # BR2_PACKAGE_RSH_REDONE is not set
>> # BR2_PACKAGE_RSYNC is not set
>> # BR2_PACKAGE_SAMBA is not set
>> # BR2_PACKAGE_SER2NET is not set
>> # BR2_PACKAGE_SOCAT is not set
>> # BR2_PACKAGE_SPAWN_FCGI is not set
>>
>> #
>> # Squid requires a toolchain with C++ and IPv6 support enabled
>> #
>> # BR2_PACKAGE_STUNNEL is not set
>> # BR2_PACKAGE_TCPDUMP is not set
>> # BR2_PACKAGE_TCPREPLAY is not set
>> # BR2_PACKAGE_TFTPD is not set
>> # BR2_PACKAGE_THTTPD is not set
>> # BR2_PACKAGE_TINYHTTPD is not set
>> # BR2_PACKAGE_TN5250 is not set
>> # BR2_PACKAGE_TTCP is not set
>> # BR2_PACKAGE_UDPCAST is not set
>> # BR2_PACKAGE_VPNC is not set
>> BR2_PACKAGE_VSFTPD=y
>> # BR2_PACKAGE_VTUN is not set
>> # BR2_PACKAGE_WGET is not set
>> # BR2_PACKAGE_WIRELESS_TOOLS is not set
>> # BR2_PACKAGE_WPA_SUPPLICANT is not set
>>
>> #
>> # Package managers
>> #
>> # BR2_PACKAGE_IPKG is not set
>>
>> #
>> # rpm requires libneon with SSL, XML and ZLIB support
>> #
>>
>> #
>> # xz payload support requires a toolchain with c++ support
>> #
>>
>> #
>> # Shell and utilities
>> #
>> # BR2_PACKAGE_AT is not set
>> # BR2_PACKAGE_BASH is not set
>> # BR2_PACKAGE_DASH is not set
>> # BR2_PACKAGE_DIALOG is not set
>> # BR2_PACKAGE_FILE is not set
>> # BR2_PACKAGE_INOTIFY_TOOLS is not set
>> # BR2_PACKAGE_LOCKFILE_PROGS is not set
>> # BR2_PACKAGE_LOGROTATE is not set
>> # BR2_PACKAGE_SCREEN is not set
>> # BR2_PACKAGE_SUDO is not set
>> # BR2_PACKAGE_WHICH is not set
>> # BR2_PACKAGE_XMLSTARLET is not set
>>
>> #
>> # System tools
>> #
>> # BR2_PACKAGE_ACL is not set
>> # BR2_PACKAGE_ATTR is not set
>> # BR2_PACKAGE_BOOTUTILS is not set
>> # BR2_PACKAGE_HTOP is not set
>> # BR2_PACKAGE_MODULE_INIT_TOOLS is not set
>> # BR2_PACKAGE_PROCPS is not set
>> # BR2_PACKAGE_PSMISC is not set
>> # BR2_PACKAGE_RSYSLOG is not set
>> # BR2_PACKAGE_SYSKLOGD is not set
>> # BR2_PACKAGE_SYSVINIT is not set
>> BR2_PACKAGE_UTIL_LINUX=y
>> BR2_PACKAGE_UTIL_LINUX_MOUNT=y
>> BR2_PACKAGE_UTIL_LINUX_FSCK=y
>> # BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set
>> BR2_PACKAGE_UTIL_LINUX_LIBUUID=y
>> # BR2_PACKAGE_UTIL_LINUX_UUIDD is not set
>> BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
>> # BR2_PACKAGE_UTIL_LINUX_AGETTY is not set
>> # BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set
>> # BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set
>> # BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set
>> # BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set
>> # BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set
>> # BR2_PACKAGE_UTIL_LINUX_RENAME is not set
>> # BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set
>> # BR2_PACKAGE_UTIL_LINUX_WALL is not set
>> # BR2_PACKAGE_UTIL_LINUX_ARCH is not set
>> # BR2_PACKAGE_UTIL_LINUX_INIT is not set
>> # BR2_PACKAGE_UTIL_LINUX_KILL is not set
>> # BR2_PACKAGE_UTIL_LINUX_LAST is not set
>> # BR2_PACKAGE_UTIL_LINUX_MESG is not set
>> # BR2_PACKAGE_UTIL_LINUX_PARTX is not set
>> # BR2_PACKAGE_UTIL_LINUX_RAW is not set
>> # BR2_PACKAGE_UTIL_LINUX_RESET is not set
>> # BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set
>> # BR2_PACKAGE_UTIL_LINUX_WRITE is not set
>>
>> #
>> # Text editors and viewers
>> #
>> # BR2_PACKAGE_ED is not set
>> # BR2_PACKAGE_LESS is not set
>> BR2_PACKAGE_NANO=y
>> # BR2_PACKAGE_UEMACS is not set
>> # BR2_PACKAGE_VIM is not set
>>
>> #
>> # Filesystem images
>> #
>> # BR2_TARGET_ROOTFS_CRAMFS is not set
>> # BR2_TARGET_ROOTFS_CLOOP is not set
>> BR2_TARGET_ROOTFS_EXT2=y
>> BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
>> BR2_TARGET_ROOTFS_EXT2_INODES=0
>> BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
>> BR2_TARGET_ROOTFS_EXT2_NONE=y
>> # BR2_TARGET_ROOTFS_EXT2_GZIP is not set
>> # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
>> # BR2_TARGET_ROOTFS_EXT2_LZMA is not set
>> # BR2_TARGET_ROOTFS_JFFS2 is not set
>> # BR2_TARGET_ROOTFS_UBIFS is not set
>> # BR2_TARGET_ROOTFS_SQUASHFS is not set
>> # BR2_TARGET_ROOTFS_TAR is not set
>> # BR2_TARGET_ROOTFS_CPIO is not set
>> # BR2_TARGET_ROOTFS_ISO9660 is not set
>> # BR2_TARGET_ROOTFS_INITRAMFS is not set
>> # BR2_TARGET_ROOTFS_ROMFS is not set
>>
>> #
>> # Bootloaders
>> #
>> # BR2_TARGET_BAREBOX is not set
>> # BR2_TARGET_GRUB is not set
>> BR2_TARGET_SYSLINUX=y
>> # BR2_TARGET_SYSLINUX_ISOLINUX is not set
>> # BR2_TARGET_SYSLINUX_PXELINUX is not set
>> # BR2_TARGET_UBOOT is not set
>>
>> #
>> # Kernel
>> #
>> BR2_LINUX_KERNEL=y
>> # BR2_LINUX_KERNEL_2_6_39 is not set
>> # BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set
>> BR2_LINUX_KERNEL_CUSTOM_VERSION=y
>> # BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set
>> # BR2_LINUX_KERNEL_CUSTOM_GIT is not set
>> BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.0.4"
>> BR2_LINUX_KERNEL_VERSION="3.0.4"
>> BR2_LINUX_KERNEL_PATCH=""
>> # BR2_LINUX_KERNEL_USE_DEFCONFIG is not set
>> BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
>> BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="/home/marc/linux-3.0.4/.config"
>> BR2_LINUX_KERNEL_BZIMAGE=y
>> # BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set
>> BR2_LINUX_KERNEL_INSTALL_TARGET=y
>>
>>
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
>
>


More information about the buildroot mailing list