[Buildroot] [RFC] Slides "Using Buildroot for real projects"

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Mon Oct 24 15:32:50 UTC 2011

Le Sun, 23 Oct 2011 14:37:55 +0200,
Baruch Siach <baruch at tkos.co.il> a écrit :

> 1. Slide 23: missing -e in the 'echo' command
> $ echo "/dev/mtdblock7\t\t/applog\tjffs2\tdefaults\t\t0\t0"
> /dev/mtdblock7\t\t/applog\tjffs2\tdefaults\t\t0\t0
> $ echo -e "/dev/mtdblock7\t\t/applog\tjffs2\tdefaults\t\t0\t0"
> /dev/mtdblock7      /applog jffs2   defaults        0   0

-e is not needed with sh:

$ echo "bla\nbli"
$ echo -e "bla\nbli"
-e bla

> 2. Slides 24-27: header should be "Project-specific packages (x/5)", instead 
>    of "... (x/4)".  (Can't TeX do this automatically somehow?)

Fixed. I don't know if TeX can do this automatically. Maybe.

Thanks for the comments. I also fixed the various comments raised by
Thomas. Thanks again!

Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.

More information about the buildroot mailing list