[Buildroot] mini 2440 config nfs problems
marek.belisko at gmail.com
Wed Aug 25 11:42:48 UTC 2010
On Wed, Aug 25, 2010 at 12:04 PM, Paul Jones <paul at pauljones.id.au> wrote:
> I use my mini2440 over nfs without any trouble. I have attached my buildroot
> and kernel configs.
> Note also that I use the kernel source from the friendlyarm site.
> My kernel command line is:
> console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/media/root rw ip=dhcp
> I have some more info on my website that might help, but some of it is
> slightly out of date.
Thanks for info. Problem is resolved. Problem was between keyboard and chair ;).
I select wrong arch type in buildroot (generic arm instead arm920t).
Sorry for disturbing.
>> -----Original Message-----
>> From: buildroot-bounces at busybox.net [mailto:buildroot-
>> bounces at busybox.net] On Behalf Of Belisko Marek
>> Sent: Wednesday, 25 August 2010 6:48 PM
>> To: buildroot at uclibc.org
>> Subject: [Buildroot] mini 2440 config nfs problems
>> playing with buildroot (2010.08_rc1) to build complete system for my
>> mini 2440 board.
>> I was able to build kernel and rootfs correctly but when I try to
>> mount rootfs over nfs it
>> always hangs with :
>> Freeing init memory: 120K
>> Kernel panic - not syncing: Attempted to kill init!
>> Is there anything what I can check? This is not related to some EABI
>> Thanks for replies,
> buildroot mailing list
> buildroot at busybox.net
as simple and primitive as possible
Marek Belisko - OPEN-NANDRA
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
More information about the buildroot