[Buildroot] busybox login problem on AT91SAM9263
Stridh, Robin ActeSE
robin.stridh at acteembedded.se
Wed Jan 21 12:50:50 UTC 2009
Peter> Then it's time to debug. Do you have an /etc/securetty on the target
Peter> and does it list ttyS0?
Robin> Yes, ttyS0 is listed in /etc/securetty. The only change i made
Robin> from the non working to the working version is changing the
Robin> busybox version and rebuild buildroot.
Peter> Ok, are you using the default busybox config
Peter> (package/busybox/busybox-1.13.x.config) or a custom one?
I'm using everything as default as set up by at91sam9263ek_defconfig. When checking
closer I realize the config file used is package/busybox/busybox-1.6.0. A diff
between this one and package/busybox/busybox-1.13.x.config gives a lot of differeces,
so I suspect this might be the cause of the problem. I'll try to recompile with a
newer config file.
Peter> If that's ok, then I would suggest you enable strace, boot with
Peter> init=/bin/sh and send the strace output of running login here to the
Robin> I tried passing init=/bin/sh to the kernel, but then I end up
Robin> without a shell. The console is still responsive and echoes
Robin> everything I type and produces newlines when I hit return but
Robin> nothing more.
Peter> Strange, that doesn't sound right. What is you console= on the kernel
Peter> cmdline set to?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the buildroot