[Buildroot] an error in make ( no .config under kernel directory )
narkewoody at gmail.com
Thu Oct 18 05:45:18 UTC 2007
On 10/18/07, Hamish Moffatt <hamish at cloud.net.au> wrote:
> On Thu, Oct 18, 2007 at 09:50:51AM +0800, Steven Woody wrote:
> > On 10/18/07, Hamish Moffatt <hamish at cloud.net.au> wrote:
> > > > cp -dpRf package/config/buildroot-config
> > > > /home/src/buildroot/project_build_arm/M501/buildroot-config
> > > > cp -dpf /home/src/buildroot/project_build_arm/M501/linux-188.8.131.52/.config
> > > > ...
> > > >
> > > > and, i go to dl/M501/linux-184.108.40.206 directory and found no .config
> > > > file. what's wrong here? the linux-2.6.10 kernel was downloaded in
> > > > another computer and was put in dl directory.
> > >
> > > You have to specify the filename for your configuration file in "make
> > > menuconfig" -> kernel.
> > understood. but where can i got a configureation file for the
> > 220.127.116.11? havn't buildroot supplied a default one suitable to
> > embedded target for me?
> I don't think buildroot can supply a meaningful default configuration
> file unless you are using one of the standard target boards found under
> target/device (and none of them match an M501).
> So you need to make your own. It appears that "make linux26-menuconfig"
> should launch the configuration editor for you.
thanks for the answer.
1, when i type in `make linux26-menuconfig', an error i got:
[ -f /home/src/buildroot/project_build_arm/M501/linux-18.104.22.168/.config
] || cp /home/src/buildroot/project_build_arm/M501/linux-22.214.171.124/.config
cp: missing destination file operand after
it seems it still need a .config under the linux-126.96.36.199 directory.
2, my M501 is an ARM 922T, if buildroot did not provide a default
kernel configuration for it, where can i get a similar one as a good
More information about the buildroot