[Buildroot] AVR32 4.1.2 toolchain build issues [was svncommit:trunk/buildroot: target/device target/device/Atmel targetetc...]
don_reid at comcast.net
Mon Oct 15 23:49:55 UTC 2007
On Tue, Oct 16, 2007 at 12:22:03AM +0200, Ulf Samuelsson wrote:
> link: www.avrfreaks.net
> ----- Original Message ----- From: "don" <don_reid at comcast.net>
> To: "Ulf Samuelsson" <ulf at atmel.com>
> Cc: "Thiago A. Corr?a" <thiago.correa at gmail.com>; <buildroot at uclibc.org>
> Sent: Tuesday, October 16, 2007 12:17 AM
> Subject: Re: [Buildroot] AVR32 4.1.2 toolchain build issues [was
> svncommit:trunk/buildroot: target/device target/device/Atmel targetetc...]
>> On Mon, Oct 15, 2007 at 11:25:52PM +0200, Ulf Samuelsson wrote:
>>>> That commit introduced gcc 4.2.1 to avr32, which builds ok, but the
>>>> compiler still has some bugs, specially the C++ compiler and the
>>>> template engine.
>>> I tested with
>>> make atngw100_defconfig
>>> which manages to build both the linux and the root fs.
>> It failed for me twice. First with the libtool error I posted
>> recently, then in uboot.
>> rm -rf
>> mkdir -p /home/dev/AVR32/Buildroot/buildroot/project_build_avr32/atngw100
>> cp -dpRf package/config/buildroot-config
>> cp target/device/Atmel/atngw100/u-boot/atngw100.h
>> cp: cannot stat `target/device/Atmel/atngw100/u-boot/atngw100.h': No such
>> file or directory
> Don't know why the libtool stuff fails, but the u-boot was never supported
> for ngw100.
> It might be as simple as adding the file:
> Is U-Boot on by default?
> Maybe I turned it off, before I built it.
> There is a later u-boot at the u-boot home page.
I just did a clean buildroot checkout and then
If U-Boot shouldn't be build for the atngw100_defconfig then that
config should turn it off.
More information about the buildroot