<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
  <title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Thank you for your reply.<br>
<br>
Below is the output of 'make'. There appear to be some spurious
characters that don't cut&amp;paste well.<br>
<br>
<tt>[rcw@P733 buildroot]$ make<br>
cp toolchain/uClibc/uClibc.config
/data/buildroot/toolchain_build_i686/uClibc/.config<br>
/data/buildroot/toolchain_build_i686/bin/sed -i -e
's,^CROSS_COMPILER_PREFIX=.*,CROSS_COMPILER_PREFIX="/data/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-",g'
\<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -e 's,# TARGET_i386 is not set,TARGET_i386=y,g' \<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -e 's,^TARGET_ARCH="none",TARGET_ARCH=\"i386\",g' \<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -e
's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"/data/buildroot/toolchain_build_i686/linux\",g'
\<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -e 's,^RUNTIME_PREFIX=.*,RUNTIME_PREFIX=\"/\",g' \<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"/usr/\",g' \<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -e
's,^SHARED_LIB_LOADER_PREFIX=.*,SHARED_LIB_LOADER_PREFIX=\"/lib\",g' \<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /data/buildroot/toolchain_build_i686/uClibc/.config<br>
/data/buildroot/toolchain_build_i686/bin/sed -i -e
's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g'
/data/buildroot/toolchain_build_i686/uClibc/.config<br>
/data/buildroot/toolchain_build_i686/bin/sed -i -e
's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g'
/data/buildroot/toolchain_build_i686/uClibc/.config<br>
/data/buildroot/toolchain_build_i686/bin/sed -i -e 's,#
UCLIBC_HAS_THREADS is not set,UCLIBC_HAS_THREADS=y,g'
/data/buildroot/toolchain_build_i686/uClibc/.config<br>
/data/buildroot/toolchain_build_i686/bin/sed -i -e 's,#
PTHREADS_DEBUG_SUPPORT is not set,PTHREADS_DEBUG_SUPPORT=y,g'
/data/buildroot/toolchain_build_i686/uClibc/.config<br>
/data/buildroot/toolchain_build_i686/bin/sed -i -e 's,#
LINUXTHREADS_OLD is not set,LINUXTHREADS_OLD=y,g'
/data/buildroot/toolchain_build_i686/uClibc/.config<br>
mkdir -p /data/buildroot/toolchain_build_i686/uClibc_dev/usr/include<br>
mkdir -p /data/buildroot/toolchain_build_i686/uClibc_dev/usr/lib<br>
mkdir -p /data/buildroot/toolchain_build_i686/uClibc_dev/lib<br>
make -C /data/buildroot/toolchain_build_i686/uClibc \<br>
PREFIX=/data/buildroot/toolchain_build_i686/uClibc_dev/ \<br>
DEVEL_PREFIX=/usr/ \<br>
RUNTIME_PREFIX=/data/buildroot/toolchain_build_i686/uClibc_dev/ \<br>
HOSTCC="gcc" \<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; pregen install_dev &amp;&amp; \<br>
touch /data/buildroot/toolchain_build_i686/uClibc/.configured<br>
/bin/sh: line 1:
/data/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc: No
such file or directory<br>
make[1]:
/data/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc:
Command not found<br>
make[1]: Entering directory
`/data/buildroot/toolchain_build_i686/uClibc'<br>
make[1]:
/data/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc:
Command not found<br>
&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; ??make -C extra/config conf<br>
/bin/sh: line 1:
/data/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc: No
such file or directory<br>
make[2]:
/data/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc:
Command not found<br>
HB0?make[2]:
/data/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc:
Command not found<br>
&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; ((make[2]: *** No rule to make target `|', needed by
`../../extra/config/conf.o'.&nbsp; Stop.<br>
make[1]: *** [extra/config/conf] Error 2<br>
make[1]: Leaving directory `/data/buildroot/toolchain_build_i686/uClibc'<br>
make: *** [/data/buildroot/toolchain_build_i686/uClibc/.configured]
Error 2<br>
[rcw@P733 buildroot]$</tt><br>
<br>
<br>
<a class="moz-txt-link-abbreviated" href="mailto:Alessio.MASSARO@oxinst.co.uk">Alessio.MASSARO@oxinst.co.uk</a> wrote:<br>
<blockquote
 cite="mid131C483B7BA5E848A332F5905E9DE6D70185217F@ukcenexb01.oxinst.com"
 type="cite">
  <pre wrap="">You understood correctly
But you'll have to provide more info. At what point does it fail? What does
it say before the 'error 2'?


  </pre>
  <blockquote type="cite">
    <pre wrap="">-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:uclibc-bounces@uclibc.org">uclibc-bounces@uclibc.org</a> 
[<a class="moz-txt-link-freetext" href="mailto:uclibc-bounces@uclibc.org">mailto:uclibc-bounces@uclibc.org</a>] On Behalf Of Bob Wirka
Sent: 02 May 2006 17:43
To: <a class="moz-txt-link-abbreviated" href="mailto:uclibc@uclibc.org">uclibc@uclibc.org</a>
Subject: Stupid Newbie Question?

Hello,

I'm trying out Buildroot. Have downloaded the snapshot, and 
tried to do a 'make' after running through 'make menuconfig'. 
I didn't change anything; just left everything as default 
because I want to see what it does for a stock setup.

The build fails with 'error 2' when it can't find 
"i386-linux-uclibc-gcc". Do I have to build the compiler 
toolchain first? It was my understanding that Buildroot was 
self-contained, and would build the toolchain, kernel, 
uClibc, etd.  Is this wrong?

Thank you,

Bob Wirka
Realtime Control Works
_______________________________________________
uClibc mailing list
<a class="moz-txt-link-abbreviated" href="mailto:uClibc@uclibc.org">uClibc@uclibc.org</a>
<a class="moz-txt-link-freetext" href="http://busybox.net/cgi-bin/mailman/listinfo/uclibc">http://busybox.net/cgi-bin/mailman/listinfo/uclibc</a>

+++ Virus-scanned by Messagelabs for Oxford Instruments +++

    </pre>
  </blockquote>
  <pre wrap=""><!---->
 ###  OXFORD INSTRUMENTS   <a class="moz-txt-link-freetext" href="http://www.oxford-instruments.com/">http://www.oxford-instruments.com/</a>  ### 

Unless stated above to be non-confidential, this E-mail and any 
attachments are private and confidential and are for the addressee 
only and may not be used, copied or disclosed save to the addressee.
If you have received this E-mail in error please notify us upon receipt 
and delete it from your records. Internet communications are not secure 
and Oxford Instruments is not responsible for their abuse by third 
parties nor for any alteration or corruption in transmission. 

_______________________________________________
uClibc mailing list
<a class="moz-txt-link-abbreviated" href="mailto:uClibc@uclibc.org">uClibc@uclibc.org</a>
<a class="moz-txt-link-freetext" href="http://busybox.net/cgi-bin/mailman/listinfo/uclibc">http://busybox.net/cgi-bin/mailman/listinfo/uclibc</a>



  </pre>
</blockquote>
</body>
</html>