making buildroot for arm7tdmi, static flat fails

[Dan Engel]

On Sat, 2010-11-13 at 18:35 +0100, Bernhard Reutner-Fischer wrote:
> Hi,
> 
> I think you sent this to the wrong list, try the buildroot ML.
> 

Thanks, will do!

Since buildroot seemed supported from the same website, I didn't think
to look for separate ML's.

-Dan Engel

> 
> > On 13 Nov 2010 16:02, "Dan Engel" <dengel at sourceharvest.com> wrote:
> > 
> > Hello, all.
> > 
> > I'm trying to make buildroot for the arm7tdmi (toolchain only, no
> > busybox, kernel, etc.) on a basic x86 system, and I get this after a
> > while of building:
> > 
> >  LN include/sys/prctl.h
> >  LN include/sys/ptrace.h
> >  LN include/sys/timerfd.h
> >  LN include/sys/elf.h
> >  LN include/sys/io.h
> >  LN include/sys/procfs.h
> >  LN include/sys/ucontext.h
> >  LN include/sys/user.h
> >  AS lib/crt1.o
> > make[1]: *** No rule to make target `lib/crti.o'.  Stop.
> > make[1]: Leaving directory
> > `/mnt/local/arm_toolchain/build/buildroot-2010.08/output/toolchain/uClibc-0.9.31'
> > make: ***
> > [/mnt/local/arm_toolchain/build/buildroot-2010.08/output/toolchain/uClibc-0.9.31/.configured] Error 2
> > 
> > Has anyone seen this, or know what might be going on?
> > 
> > Of course, this is only the last part of the output. If this is not
> > a
> > known issue with a known work-around, then I'll gladly send a
> > follow-up
> > post with the entire make output (along with the buildroot and
> > uclibc
> > configurations) attached.
> > 
> > What additional information can I provide, that would help anyone
> > willing to help me?
> > 
> > Thanks,
> > -Dan Engel
> > 
> > 
> > 
> > _______________________________________________
> > uClibc mailing list
> > uClibc at uclibc.org
> > http://lists.busybox.net/mailman/listinfo/uclibc
>