uClibc build failure

[Khem Raj]

Lei Sun said the following on 12/20/2005 01:49 PM:

> Yeah, i found that before, but no patch yet ?
>
>


Do have this patch applied
http://kegel.com/crosstool/crosstool-0.38/patches/gcc-3.4.4/gcc-3.4.0-arm-nolibfloat.patch

> Thanks!
> lei
> ----- Original Message ----- From: "Glenn Henshaw"
> <ghenshaw at precidia.com>
> To: "Lei Sun" <lei_sun at comcast.net>
> Cc: <uclibc at uclibc.org>
> Sent: Tuesday, December 20, 2005 4:41 PM
> Subject: Re: uClibc build failure
>
>
>> See http://bugs.uclibc.org/view.php?id=492 .
>>
>> Lei Sun wrote:
>>
>>> Hi all:
>>> I had the buildroot with following combinations
>>>
>>> gcc-3.4.2
>>> binutils-2.16.1
>>> uClibc-0.9.28
>>>
>>> I had successuly built the entire toolchain and was able to build
>>> uClinux, later on i found some problems and run a "make clean" in
>>> boochain_build_armeb_nofpu/uClibc-0.9.28 directory, tried to rebuild
>>> the
>>> uClibc. This was when the pain begain, i couldn't build uClibc anymore,
>>> it gave me error when configuring libstdc++v3
>>>
>>> checking for main in -lm... configure: error: Link tests are not
>>> allowed
>>> after GCC_NO_EXECUTABLES.
>>> make[1]: *** [configure-target-libstdc++-v3] Error 1
>>> make[1]: Leaving directory
>>> `/home/lsun/buildroot/toolchain_build_armeb_nofpu/gcc-3.4.2-final'
>>> make: ***
>>> [/home/lsun/buildroot/toolchain_build_armeb_nofpu/gcc-3.4.2-final/.compiled]
>>>
>>> Error 2
>>> I googled around and found a few post with the same problem, but didn't
>>> find solution. I tried to disable C++ support(although i need it ), but
>>> it still try to configure libstd++ when executing buildroot
>>> compilation.
>>>
>>> Can anybody shed some lights on me?
>>>
>>> Thank you!
>>> lei
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> _______________________________________________
>>> uClibc mailing list
>>> uClibc at uclibc.org
>>> http://busybox.net/cgi-bin/mailman/listinfo/uclibc
>>
>>
>> -- 
>> Glenn Henshaw, Developer
>> Precidia Technologies
>> t: 613-592-7557 x253
>> e: ghenshaw at precidia.com
>>
>
> _______________________________________________
> uClibc mailing list
> uClibc at uclibc.org
> http://busybox.net/cgi-bin/mailman/listinfo/uclibc