[uClibc]gcc 3.2.2 on mipsel
Dana Soward
dragon at thegoop.com
Tue Feb 25 23:52:58 UTC 2003
What version of uclibc are you using? If 0.9.18, try using a static
busybox. If that works, youre having the same problem i am (dynamic
binaries wont run...), and AFAIK, its being worked on. Hope that helps.
Dana
On Wed, 26 Feb 2003 dwu at zipworld.com.au wrote:
>
> Hi,
>
> I'm having a problem with getting busybox to boot up on a mipsel platform using
> gcc 3.2.2. The kernel seems to boot correctly, but when it tries to
> execute 'init', it gets stuck. ie. no more output from the terminal. The last
> message is from the terminal is
>
> 'Kernel Freeing unused memory: 321k'
>
> Note that the kernel has not hung because the serial input is still accepting
> characters.
>
> I've compiled the gcc toolchain using the files from
>
> http://www.uclibc.org/cgi-bin/cvsweb/toolchain/gcc-3.2.2/
>
> The kernel (2.4.18) and busybox 0.60.5 were then compiled using the toolchain.
>
> I've read a few posts regarding the -march and -mcpu switches and I've checked
> that these were consistent for the toolchain, kernel and busybox.
>
> Enabling LD_DEBUG for uClibc produced a couple of extra lines of debug:
>
> ELF header=0x...
> First Dynamic section entry=0x...
>
> Note that I've managed to get all this to work for gcc 3.2, uClibc 0.9.15, and
> busybox 0.60.5.
>
> Has anyone had a similar experience?
>
> Thanks in advanced.
>
> -Dan
> _______________________________________________
> uClibc mailing list
> uClibc at uclibc.org
> http://uclibc.org/mailman/listinfo/uclibc
>
More information about the uClibc
mailing list