Re: Ответ: Ответ: mount with ntfs partition question.
Michael D. Setzer II
mikes at kuentos.guam.net
Thu Jul 24 17:57:30 UTC 2008
On 24 Jul 2008 at 17:07, Vladimir Dronnikov wrote:
Date sent: Thu, 24 Jul 2008 17:07:46 +0000
From: "Vladimir Dronnikov" <dronnikov at gmail.com>
To: "Michael D. Setzer II" <mikes at kuentos.guam.net>
Subject: ïÔ×ÅÔ: ïÔ×ÅÔ: mount with ntfs partition question.
Copies to: busybox at busybox.net
> When helpers are enabled BB mount will try to exec mount.<fstype>.
> This in turn means you should have mount.ntfs-3g binary on your PATH.
> It can be a symlink to ntfs-3g fuse helper. Note that mount will try
> to exec helper only if mount syscall if failed. In your case
> mount(dev, dir, "ntfs", ...) succeeds preventing mount from probing
> other filesystem types. I guess you should also enlist ntfs-3g prior
> to ntfs in /etc/filesystems.
>
> Did it help?
Yes.
I booted from the cd and tried it again, and without the change same issue.
Then added ntfs-3g before the ntfs line, and redid the test, and it worked.
>
> --
> Vladimir
>
> 2008/7/24, Michael D. Setzer II <mikes at kuentos.guam.net>:
> > On 24 Jul 2008 at 15:23, Vladimir Dronnikov wrote:
> >
> > Date sent: Thu, 24 Jul 2008 15:23:50 +0000
> > From: "Vladimir Dronnikov" <dronnikov at gmail.com>
> > To: "Michael D. Setzer II" <mikes at kuentos.guam.net>
> > Subject: ïÔ×ÅÔ: mount with ntfs partition question.
> > Copies to: busybox at busybox.net
> >
> >> Two questions, Michael.
> >>
> >> Have you enabled CONFIG_FEATURE_MOUNT_HELPERS in BB .config? Have you
> >> set filesystem type to ntfs-3g in your /etc/fstab?
> >
> > I checked the busybox .config and the
> > CONFIG_FEATURE_MOUNT_HELPERS is already =y
> >
> > This is a bootable CD that loads the g4l filesystem in a ramdisk to do disk
> > imaging, so the actual drive information is not known.
> >
> >
> >
> >
> >>
> >> --
> >> Vladimir
> >>
> >> 2008/7/24, Michael D. Setzer II <mikes at kuentos.guam.net>:
> >> > When I use the busybox mount to mount an ntfs partition it says it is
> >> > mounted in rw mode, but attempts to write result in permission denied.
> >> >
> >> > busybox mount /dev/hda6
> >> >
> >> > busybox mount output
> >> >
> >> > rootfs on / type rootfs (rw)
> >> > /dev/root on / type ext2 (rw,errors=continue)
> >> > proc on /proc type proc (rw)
> >> > sysfs on /sys type sysfs (rw)
> >> > devpts on /dev/pts type devpts (rw,mode=600)
> >> > /dev/hda6 on /mnt/local type ntfs
> >> > (rw,uid=0,gid=0,fmask=0177,dmask=077,nls=default,errors=continue,mft_zo
> >> > ne_multiplier=1)
> >> >
> >> > I would also get a similar issue if I used the regular mount command
> >> > from
> >> > Fedora. If I used ntfs-3g or if I use the regular mount command with the
> >> > mount.xxx helper files from /sbin it mount and is rw allowed.
> >> >
> >> > mount /dev/hda6 /mnt/local
> >> > or
> >> > ntfs-3g /dev/hda6 /mnt/local
> >> >
> >> > /dev/ram0 on / type ext2 (rw)
> >> > proc on /proc type proc (rw)
> >> > sysfs on /sys type sysfs (rw)
> >> > devpts on /dev/pts type devpts (rw)
> >> > /dev/hda6 on /mnt/local type fuseblk (rw,allow_other,blksize=4096)
> >> >
> >> > Is there something that needs to be done with busybox to get the rw.
> >> >
> >> > +----------------------------------------------------------+
> >> > Michael D. Setzer II - Computer Science Instructor
> >> > Guam Community College Computer Center
> >> > mailto:mikes at kuentos.guam.net
> >> > mailto:msetzerii at gmail.com
> >> > http://www.guam.net/home/mikes
> >> > Guam - Where America's Day Begins
> >> > +----------------------------------------------------------+
> >> >
> >> > http://setiathome.berkeley.edu (Original)
> >> > Number of Seti Units Returned: 19,471
> >> > Processing time: 32 years, 290 days, 12 hours, 58 minutes
> >> > (Total Hours: 287,489)
> >> >
> >> > BOINC at HOME CREDITS
> >> > SETI 6,025,550.2382 | EINSTEIN 1,853,681.7243 | ROSETTA
> >> > 559,261.1924
> >> >
> >> > _______________________________________________
> >> > busybox mailing list
> >> > busybox at busybox.net
> >> > http://busybox.net/cgi-bin/mailman/listinfo/busybox
> >> >
> >>
> >
> >
> > +----------------------------------------------------------+
> > Michael D. Setzer II - Computer Science Instructor
> > Guam Community College Computer Center
> > mailto:mikes at kuentos.guam.net
> > mailto:msetzerii at gmail.com
> > http://www.guam.net/home/mikes
> > Guam - Where America's Day Begins
> > +----------------------------------------------------------+
> >
> > http://setiathome.berkeley.edu (Original)
> > Number of Seti Units Returned: 19,471
> > Processing time: 32 years, 290 days, 12 hours, 58 minutes
> > (Total Hours: 287,489)
> >
> > BOINC at HOME CREDITS
> > SETI 6,025,550.2382 | EINSTEIN 1,853,681.7243 | ROSETTA
> > 559,261.1924
> >
> >
>
+----------------------------------------------------------+
Michael D. Setzer II - Computer Science Instructor
Guam Community College Computer Center
mailto:mikes at kuentos.guam.net
mailto:msetzerii at gmail.com
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
+----------------------------------------------------------+
http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned: 19,471
Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC at HOME CREDITS
SETI 6,025,550.2382 | EINSTEIN 1,853,681.7243 | ROSETTA
559,261.1924
More information about the busybox
mailing list