Init hanging

Fri Mar 17 04:23:47 UTC 2006

Hi Rob,
	I've tried as per your suggestion given in the link
http://busybox.net/FAQ.html#init

But I don't get the hello world message.

Given below is the kernel dmesg for your reference.

-------------------------------------------------

YAMON> go
Linux version 2.6.10_mvl401-bcm91250-mips64_fp_be (root at ramkumar) (gcc
version 3
.4.3 (MontaVista 3.4.3-25.0.70.0501961 2005-12-18)) #109 Fri Mar 17
09:37:08 IST
 2006
CPU revision is: 00002d30
FPU revision is: 00002d30
TX4938 -- 300MHz(M25MHz) CRIR:49380010 CCFG:3306427905
PCFG:680000010fbf0100
TX4938 SDRAMC -- CR0:0000007e00000544 TR:35000830c
request resource for internal registers failed
PIOSEL: disabling both ata and nand selection
RBTX4938 --- FPGA(Rev f0) DIPSW:ff,f8
Determined physical RAM map:
 memory: 0000000008000000 @ 0000000000000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,38400 ip=dhcp root=/dev/nfs rw
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32
bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (31 instructions).
Synthesized TLB load handler fastpath (44 instructions).
Synthesized TLB store handler fastpath (44 instructions).
Synthesized TLB modify handler fastpath (43 instructions).
PID hash table entries: 1024 (order: 10, 32768 bytes)
Using 150.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Memory: 123840k/131072k available (2951k kernel code, 7128k reserved,
524k data,
 204k init, 0k highmem)
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Checking for 'wait' instruction...  available.
Checking for the multiply/shift bug... no.
Checking for the daddi bug... no.
Checking for the daddiu bug... no.
spawn_desched_task(0000000000000000)
desched cpu_callback 3/0000000000000000
ksoftirqd started up.
desched cpu_callback 2/0000000000000000
desched thread 0 started up.
NET: Registered protocol family 16
Can't analyze prologue code at ffffffff803de510
Initializing Cryptographic API
Generic RTC Driver v1.07
TX39/49 Serial driver version 1.04
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
ne.c:v1.10 9/23/94 Donald Becker (becker at scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x17f20280: 00 60 0a 00 4d 80
eth0: RBHMA4X00/RTL8019 found at 0x17f20280, using IRQ 27.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
NET: Registered protocol family 24
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.5.93, my address is
192.168.5.249
IP-Config: Complete:
      device=eth0, addr=192.168.5.249, mask=255.255.255.0,
gw=255.255.255.255,
     host=192.168.5.249, domain=, nis-domain=(none),
     bootserver=192.168.5.93, rootserver=192.168.5.93,
rootpath=/mvl4.0.1_be/mon
tavista/pro/devkit/mips/mips2_fp_be/target
Looking up port of RPC 100003/2 on 192.168.5.93
Looking up port of RPC 100005/1 on 192.168.5.93
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 204k freed

---------------------------------------

After this I don't see anything.

Thanking u

Regards,
Vadi.

-----Original Message-----
From: Rob Landley [mailto:rob at landley.net]
Sent: Saturday, March 11, 2006 12:37 AM
To: Vadivelan M
Cc: busybox at busybox.net
Subject: Re: Init hanging

On Thursday 09 March 2006 11:29 pm, Vadivelan at soc-soft.com wrote:
> Hi Rob,
> 	I'm extremely sorry abt the message at the bottom of the mail.It
is
> an automatically embedded message. I cannot remove it. Please forgive
> me for the inconvenience.
>
> Thanking you
>
> Regards,
> Vadi.

As I said, I was being unnecessarily grumpy.  Not your fault. :)

Rob
--
Never bet against the cheap plastic solution.

The information contained in this e-mail message and in any annexure is
confidential to the  recipient and may contain privileged information. If you are not
the intended recipient, please notify the sender and delete the message along with
any annexure. You should not disclose, copy or otherwise use the information contained
in the message or any annexure. Any views expressed in this e-mail are those of the
individual sender except where the sender specifically states them to be the views of
SoCrates Software India Pvt Ltd., Bangalore.