[BusyBox] Problems with getty not spawning correctly (more)
Vijay Padiyar
vijay_padiyar at hotmail.com
Fri Feb 11 04:56:29 UTC 2005
Hi
Or before you do that, try changing your /etc/inittab line to:
tty0::respawn:/sbin/getty -L tty0 9600 vt100
with the same boot arguments.
See if it works.
Regards
Vijay Padiyar
http://www.vijaypadiyar.eu.tf
> ----- Original Message -----
> From: <jpswensen at comcast.net>
> To: "Vijay Padiyar" <vijay_padiyar at hotmail.com>
> Sent: Thursday, February 10, 2005 9:09 PM
> Subject: Re: [BusyBox] Problems with getty not spawning correctly
>
>
> > We are using the following bootline:
> > console=ttyS0,9600 console=tty0 eth0=162.18.182.10
> >
> > It is the same bootline we used last November with success. We are able
> to see the output of the kernel booting until it reaches the getty
portions
> of the inittab script. In our inittab we commented out the lines
involving
> tty1, tty2, and tty3.
> >
> > Thanks for the help.
> >
> > John Swensen
> > jpswensen at comcast.net
More information about the busybox
mailing list