[BusyBox] Ctrl-C doesn't works

[Michael Pfeiffer]

Meanwhile I found out that it doesn't works only when I use the serial 
console. After logging in via SSH Ctrl-C works perfect.

As far as I can see, there are all devices available in /dev (and the same 
kernel works well when I don't use BusyBox).

Kind regards

Michael

On Thu, 6 May 2004 08:13:55 +0100, David Cannings <lists at edeca.net> wrote:

> On Thursday 06 May 2004 06:19, Michael Pfeiffer wrote:
>> currently I'm using BusyBox v1.00-pre8. There Ctrl-C doesn't works, so
>> it is impossible to break any program with it. In some older archives I
>> found the infomration that may be possible when busybox is running
>> somehow with pid 1. But thats not the case here.
>> So what could be the reason for this problem?
>
> Quite possibly your kernel has been compiled with devfs support and
> BusyBox hasn't, or the kernel hasn't been compiled with devfs support but
> you forgot to populate /dev with the required nodes.
>
> David
> _______________________________________________
> busybox mailing list
> busybox at mail.busybox.net
> http://busybox.net/mailman/listinfo/busybox



-- 
Mit freundlichen Grüßen / Best Regards
Michael Pfeiffer

S.W.A.C. Schmitt-Walter Automation Consult GmbH
Headquarters Munich
Ödenpullach Haus 1
82041 Oberhaching

Mail: pfeiffer at swac.de
Web: http://www.swac.de