[BusyBox] TAKE 2: Message on Startup: "sh: can't access tty; job control

[Daniel Huhardeaux]

Vladimir N. Oleynik wrote:

 >[...]
 >Please change from openvt:
 >1) fork() to vfork()
 >
 >2) return EXIT_SUCCESS;
 >to
 >while(1) pause();
 >or put to end linuxrc not stoped applet,
 >for example syslogd -n (don`t fork)

Hourrah, that did the trick. I put syslogd -n after openvt 1 sh in my
linuxrc and everything works fine.

Thanks Vladimir.

-- 
:  ______ ______ ______ ______ ______ __  daniel.huhardeaux at tootai.com
: /_____// __  // __  //_____// __  // / phone.: +48 32 285 4554
:  / /  / /_/ // /_/ /  / /  / /_/ // / fax....: +48 32 285 4554
: /_/  /_____//_____/  /_/  /_/ /_//_/ mobile..: +48 602 284 546