[BusyBox] TAKE 2: Message on Startup: "sh: can't access tty; job control turned off"

[daniel huhardeaux]

Hello,

even after check carefully and apply both patches from Vladimir and 
Larry, I always get the subject message. So here is my configuration:

Kernel 2.4.18 RH73 without modules for floppy boot
Busybox 0.60.5 (also tested with 0.60.4)
I *don't use* init
I *use* linuxrc
I *don't* want to connect console to ttyS but to tty to have Ctrl-C 
activate.

Value of my mknod

crw--w--w-    1 root     tty        5,   1 jan  9 15:28 console
brw-rw-r--    1 root     root       2,   0 nov  6 23:53 fd0
crw-r--r--    1 root     root       1,   3 nov  6 23:54 null
brw-r-----    1 root     root       1,   1 nov  6 23:54 ram
crw-rw-rw-    1 root     root       5,   0 nov  6 23:54 tty
crw--w--w-    1 root     tty        4,   0 nov  6 23:54 tty0
crw--w--w-    1 root     tty        4,   1 jan  9 17:47 tty1
crw-rw-rw-    1 root     root       1,   5 nov  6 23:55 zero

In my bootparam I added console=tty0 (tested also with console=tty1) and 
in my linuxrc I put variable CONSOLE=tty0 or tty1 accorded to my 
bootparam. Doesn't help.

Welcome to any idea

-- 
daniel.huhardeaux
devel at tootai.net