[BusyBox] passwd seg fault

[Stefan Jeglinski]

This was discussed a while back for pre1, but it is still tru fro 
pre2. Any ideas on this (running on an arm, can supply more info if 
necessary):

bash-2.04# passwd jayanthi
Changing password for jayanthi
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:
Re-enter new password:
passwd: memory violation at pc=0x0205411c, lr=0x0000001f (bad 
address=0x0000000)
pc : [<0205411c>]    lr : [<0000001f>]
sp : bffffc60  ip : 020b8c13  fp : bffffc6c
r10: 00000000  r9 : 00000000  r8 : 00000001
r7 : 020b8554  r6 : bffffc80  r5 : bffffd48  r4 : 020b8c14
r3 : 020b8c94  r2 : 0000007f  r1 : 00000000  r0 : 020b8c14
Flags: nzCv  IRQs on  FIQs on  Mode USER_32  Segment user
Control: 017D  Table: C0308015  DAC: 00000015
Function entered at [<020540e4>] from [<02039f44>]
Function entered at [<0203dad4>] from [<02000104>]
  r10 = 00000000  r8 = 00000000  r7 = 00000000  r6 = 00000000
  r5 = 00000000  r4 = 00000000
Segmentation fault




Stefan Jeglinski