[git commit master 1/1] telnet: convert CR NUL -> CR on input. Closes bug 2569

Denys Vlasenko vda.linux at googlemail.com
Fri Oct 29 00:12:22 UTC 2010


commit: http://git.busybox.net/busybox/commit/?id=036dbb9d9ab239bbd7eecad8580876c9c3e57dc5
branch: http://git.busybox.net/busybox/commit/?id=refs/heads/master

function                                             old     new   delta
telnet_main                                         1558    1594     +36

Signed-off-by: Denys Vlasenko <vda.linux at googlemail.com>
---
 networking/telnet.c |  132 ++++++++++++++++++++++++--------------------------
 1 files changed, 63 insertions(+), 69 deletions(-)

diff --git a/networking/telnet.c b/networking/telnet.c
index 12d1970..0cf28f6 100644
--- a/networking/telnet.c
+++ b/networking/telnet.c
@@ -42,11 +42,13 @@ enum {
 	UF_ECHO = 0x01,
 	UF_SGA = 0x02,
 
-	TS_0 = 1,
+	TS_NORMAL = 0,
+	TS_COPY = 1,
 	TS_IAC = 2,
 	TS_OPT = 3,
 	TS_SUB1 = 4,
 	TS_SUB2 = 5,
+	TS_CR = 6,
 };
 
 typedef unsigned char byte;
@@ -83,13 +85,13 @@ struct globals {
 	}; \
 } while (0)
 
-/* Function prototypes */
+
 static void rawmode(void);
 static void cookmode(void);
 static void do_linemode(void);
 static void will_charmode(void);
 static void telopt(byte c);
-static int subneg(byte c);
+static void subneg(byte c);
 
 static void iac_flush(void)
 {
@@ -170,24 +172,24 @@ static void handle_net_output(int len)
 	 * So I implemented it. It's really useful for me. I hope that
 	 * other people will find it interesting too.
 	 */
-
-	int i, j;
+	byte outbuf[2 * DATABUFSIZE];
 	byte *p = (byte*)G.buf;
-	byte outbuf[4*DATABUFSIZE];
+	int j = 0;
 
-	for (i = len, j = 0; i > 0; i--, p++) {
-		if (*p == 0x1d) {
+	for (; len > 0; len--, p++) {
+		byte c = *p;
+		if (c == 0x1d) {
 			con_escape();
 			return;
 		}
-		outbuf[j++] = *p;
-		if (*p == 0xff)
-			outbuf[j++] = 0xff;
-		else if (*p == 0x0d)
-			outbuf[j++] = 0x00;
+		outbuf[j++] = c;
+		if (c == IAC)
+			outbuf[j++] = c; /* IAC -> IAC IAC */
+		else if (c == '\r')
+			outbuf[j++] = '\0'; /* CR -> CR NUL */
 	}
 	if (j > 0)
-		write(netfd, outbuf, j);
+		full_write(netfd, outbuf, j);
 }
 
 static void handle_net_input(int len)
@@ -198,25 +200,44 @@ static void handle_net_input(int len)
 	for (i = 0; i < len; i++) {
 		byte c = G.buf[i];
 
-		if (G.telstate == 0) { /* most of the time state == 0 */
+		if (G.telstate == TS_NORMAL) { /* most typical state */
 			if (c == IAC) {
 				cstart = i;
 				G.telstate = TS_IAC;
 			}
+			else if (c == '\r') {
+				cstart = i + 1;
+				G.telstate = TS_CR;
+			}
+			/* No IACs were seen so far, no need to copy
+			 * bytes within G.buf: */
 			continue;
 		}
+
 		switch (G.telstate) {
-		case TS_0:
+		case TS_CR:
+			/* Prev char was CR. If cur one is NUL, ignore it.
+			 * See RFC 1123 section 3.3.1 for discussion of telnet EOL handling.
+			 */
+			G.telstate = TS_COPY;
+			if (c == '\0')
+				break;
+			/* else: fall through - need to handle CR IAC ... properly */
+
+		case TS_COPY: /* Prev char was ordinary */
+			/* Similar to NORMAL, but in TS_COPY we need to copy bytes */
 			if (c == IAC)
 				G.telstate = TS_IAC;
 			else
 				G.buf[cstart++] = c;
+			if (c == '\r')
+				G.telstate = TS_CR;
 			break;
 
-		case TS_IAC:
-			if (c == IAC) { /* IAC IAC -> 0xFF */
+		case TS_IAC: /* Prev char was IAC */
+			if (c == IAC) { /* IAC IAC -> one IAC */
 				G.buf[cstart++] = c;
-				G.telstate = TS_0;
+				G.telstate = TS_COPY;
 				break;
 			}
 			/* else */
@@ -228,34 +249,38 @@ static void handle_net_input(int len)
 			case DONT:
 			case WILL:
 			case WONT:
-				G.telwish =  c;
+				G.telwish = c;
 				G.telstate = TS_OPT;
 				break;
+			/* DATA MARK must be added later */
 			default:
-				G.telstate = TS_0;	/* DATA MARK must be added later */
+				G.telstate = TS_COPY;
 			}
 			break;
-		case TS_OPT: /* WILL, WONT, DO, DONT */
+
+		case TS_OPT: /* Prev chars were IAC WILL/WONT/DO/DONT */
 			telopt(c);
-			G.telstate = TS_0;
+			G.telstate = TS_COPY;
 			break;
+
 		case TS_SUB1: /* Subnegotiation */
 		case TS_SUB2: /* Subnegotiation */
-			if (subneg(c))
-				G.telstate = TS_0;
+			subneg(c); /* can change G.telstate */
 			break;
 		}
 	}
-	if (G.telstate) {
+
+	if (G.telstate != TS_NORMAL) {
+		/* We had some IACs, or CR */
 		if (G.iaclen)
 			iac_flush();
-		if (G.telstate == TS_0)
-			G.telstate = 0;
+		if (G.telstate == TS_COPY) /* we aren't in the middle of IAC */
+			G.telstate = TS_NORMAL;
 		len = cstart;
 	}
 
 	if (len)
-		write(STDOUT_FILENO, G.buf, len);
+		full_write(STDOUT_FILENO, G.buf, len);
 }
 
 static void put_iac(int c)
@@ -495,7 +520,7 @@ static void telopt(byte c)
 }
 
 /* subnegotiation -- ignore all (except TTYPE,NAWS) */
-static int subneg(byte c)
+static void subneg(byte c)
 {
 	switch (G.telstate) {
 	case TS_SUB1:
@@ -513,12 +538,13 @@ static int subneg(byte c)
 #endif
 		break;
 	case TS_SUB2:
-		if (c == SE)
-			return TRUE;
+		if (c == SE) {
+			G.telstate = TS_COPY;
+			return;
+		}
 		G.telstate = TS_SUB1;
-		/* break; */
+		break;
 	}
-	return FALSE;
 }
 
 static void rawmode(void)
@@ -533,21 +559,13 @@ static void cookmode(void)
 		tcsetattr(0, TCSADRAIN, &G.termios_def);
 }
 
-/* poll gives smaller (-70 bytes) code */
-#define USE_POLL 1
-
 int telnet_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
 int telnet_main(int argc UNUSED_PARAM, char **argv)
 {
 	char *host;
 	int port;
 	int len;
-#ifdef USE_POLL
 	struct pollfd ufds[2];
-#else
-	fd_set readfds;
-	int maxfd;
-#endif
 
 	INIT_G();
 
@@ -585,25 +603,11 @@ int telnet_main(int argc UNUSED_PARAM, char **argv)
 
 	signal(SIGINT, record_signo);
 
-#ifdef USE_POLL
 	ufds[0].fd = 0; ufds[1].fd = netfd;
 	ufds[0].events = ufds[1].events = POLLIN;
-#else
-	FD_ZERO(&readfds);
-	FD_SET(STDIN_FILENO, &readfds);
-	FD_SET(netfd, &readfds);
-	maxfd = netfd + 1;
-#endif
 
 	while (1) {
-#ifndef USE_POLL
-		fd_set rfds = readfds;
-
-		switch (select(maxfd, &rfds, NULL, NULL, NULL))
-#else
-		switch (poll(ufds, 2, -1))
-#endif
-		{
+		switch (poll(ufds, 2, -1)) {
 		case 0:
 			/* timeout */
 		case -1:
@@ -615,12 +619,7 @@ int telnet_main(int argc UNUSED_PARAM, char **argv)
 			break;
 		default:
 
-#ifdef USE_POLL
-			if (ufds[0].revents)
-#else
-			if (FD_ISSET(STDIN_FILENO, &rfds))
-#endif
-			{
+			if (ufds[0].revents) {
 				len = safe_read(STDIN_FILENO, G.buf, DATABUFSIZE);
 				if (len <= 0)
 					doexit(EXIT_SUCCESS);
@@ -628,12 +627,7 @@ int telnet_main(int argc UNUSED_PARAM, char **argv)
 				handle_net_output(len);
 			}
 
-#ifdef USE_POLL
-			if (ufds[1].revents)
-#else
-			if (FD_ISSET(netfd, &rfds))
-#endif
-			{
+			if (ufds[1].revents) {
 				len = safe_read(netfd, G.buf, DATABUFSIZE);
 				if (len <= 0) {
 					full_write1_str("Connection closed by foreign host\r\n");
-- 
1.7.1



More information about the busybox-cvs mailing list