svn commit: trunk/busybox: scripts testsuite

vda at busybox.net vda at busybox.net
Fri May 2 21:46:30 UTC 2008


Author: vda
Date: 2008-05-02 14:46:30 -0700 (Fri, 02 May 2008)
New Revision: 21925

Log:
more fixes to testsuite by Cristian and vda



Added:
   trunk/busybox/scripts/echo.c

Modified:
   trunk/busybox/testsuite/cpio.tests
   trunk/busybox/testsuite/testing.sh


Changeset:
Added: trunk/busybox/scripts/echo.c
===================================================================
--- trunk/busybox/scripts/echo.c	                        (rev 0)
+++ trunk/busybox/scripts/echo.c	2008-05-02 21:46:30 UTC (rev 21925)
@@ -0,0 +1,230 @@
+/* vi: set sw=4 ts=4: */
+/*
+ * echo implementation for busybox - used as a helper for testsuite/*
+ * on systems lacking "echo -en"
+ *
+ * Copyright (c) 1991, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
+ *
+ * Original copyright notice is retained at the end of this file.
+ */
+
+/* BB_AUDIT SUSv3 compliant -- unless configured as fancy echo. */
+/* http://www.opengroup.org/onlinepubs/007904975/utilities/echo.html */
+
+/* Mar 16, 2003      Manuel Novoa III   (mjn3 at codepoet.org)
+ *
+ * Because of behavioral differences, implemented configurable SUSv3
+ * or 'fancy' gnu-ish behaviors.  Also, reduced size and fixed bugs.
+ * 1) In handling '\c' escape, the previous version only suppressed the
+ *     trailing newline.  SUSv3 specifies _no_ output after '\c'.
+ * 2) SUSv3 specifies that octal escapes are of the form \0{#{#{#}}}.
+ *    The previous version did not allow 4-digit octals.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <limits.h>
+
+#define WANT_HEX_ESCAPES 1
+
+/* Usual "this only works for ascii compatible encodings" disclaimer. */
+#undef _tolower
+#define _tolower(X) ((X)|((char) 0x20))
+
+static char bb_process_escape_sequence(const char **ptr)
+{
+	static const char charmap[] = {
+		'a',  'b',  'f',  'n',  'r',  't',  'v',  '\\', 0,
+		'\a', '\b', '\f', '\n', '\r', '\t', '\v', '\\', '\\' };
+
+	const char *p;
+	const char *q;
+	unsigned int num_digits;
+	unsigned int r;
+	unsigned int n;
+	unsigned int d;
+	unsigned int base;
+
+	num_digits = n = 0;
+	base = 8;
+	q = *ptr;
+
+#ifdef WANT_HEX_ESCAPES
+	if (*q == 'x') {
+		++q;
+		base = 16;
+		++num_digits;
+	}
+#endif
+
+	do {
+		d = (unsigned char)(*q) - '0';
+#ifdef WANT_HEX_ESCAPES
+		if (d >= 10) {
+			d = (unsigned char)(_tolower(*q)) - 'a' + 10;
+		}
+#endif
+
+		if (d >= base) {
+#ifdef WANT_HEX_ESCAPES
+			if ((base == 16) && (!--num_digits)) {
+/*				return '\\'; */
+				--q;
+			}
+#endif
+			break;
+		}
+
+		r = n * base + d;
+		if (r > UCHAR_MAX) {
+			break;
+		}
+
+		n = r;
+		++q;
+	} while (++num_digits < 3);
+
+	if (num_digits == 0) {	/* mnemonic escape sequence? */
+		p = charmap;
+		do {
+			if (*p == *q) {
+				q++;
+				break;
+			}
+		} while (*++p);
+		n = *(p + (sizeof(charmap)/2));
+	}
+
+	*ptr = q;
+
+	return (char) n;
+}
+
+
+int main(int argc, char **argv)
+{
+	const char *arg;
+	const char *p;
+	char nflag = 1;
+	char eflag = 0;
+
+	/* We must check that stdout is not closed. */
+	if (dup2(1, 1) != 1)
+		return -1;
+
+	while (1) {
+		arg = *++argv;
+		if (!arg)
+			goto newline_ret;
+		if (*arg != '-')
+			break;
+
+		/* If it appears that we are handling options, then make sure
+		 * that all of the options specified are actually valid.
+		 * Otherwise, the string should just be echoed.
+		 */
+		p = arg + 1;
+		if (!*p)	/* A single '-', so echo it. */
+			goto just_echo;
+
+		do {
+			if (!strrchr("neE", *p))
+				goto just_echo;
+		} while (*++p);
+
+		/* All of the options in this arg are valid, so handle them. */
+		p = arg + 1;
+		do {
+			if (*p == 'n')
+				nflag = 0;
+			if (*p == 'e')
+				eflag = '\\';
+		} while (*++p);
+	}
+ just_echo:
+	while (1) {
+		/* arg is already == *argv and isn't NULL */
+		int c;
+
+		if (!eflag) {
+			/* optimization for very common case */
+			fputs(arg, stdout);
+		} else while ((c = *arg++)) {
+			if (c == eflag) {	/* Check for escape seq. */
+				if (*arg == 'c') {
+					/* '\c' means cancel newline and
+					 * ignore all subsequent chars. */
+					goto ret;
+				}
+				{
+					/* Since SUSv3 mandates a first digit of 0, 4-digit octals
+					* of the form \0### are accepted. */
+					if (*arg == '0') {
+						/* NB: don't turn "...\0" into "...\" */
+						if (arg[1] && ((unsigned char)(arg[1]) - '0') < 8) {
+							arg++;
+						}
+					}
+					/* bb_process_escape_sequence handles NUL correctly
+					 * ("...\" case. */
+					c = bb_process_escape_sequence(&arg);
+				}
+			}
+			putchar(c);
+		}
+
+		arg = *++argv;
+		if (!arg)
+			break;
+		putchar(' ');
+	}
+
+ newline_ret:
+	if (nflag) {
+		putchar('\n');
+	}
+ ret:
+	return fflush(stdout);
+}
+
+/*-
+ * Copyright (c) 1991, 1993
+ *      The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Kenneth Almquist.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. <BSD Advertising Clause omitted per the July 22, 1999 licensing change
+ *              ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change>
+ *
+ *      California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *      @(#)echo.c      8.1 (Berkeley) 5/31/93
+ */

Modified: trunk/busybox/testsuite/cpio.tests
===================================================================
--- trunk/busybox/testsuite/cpio.tests	2008-05-02 20:31:57 UTC (rev 21924)
+++ trunk/busybox/testsuite/cpio.tests	2008-05-02 21:46:30 UTC (rev 21925)
@@ -4,6 +4,13 @@
 
 . testing.sh
 
+# check if hexdump supports the '-R' option
+hexdump -R </dev/null >/dev/null 2>&1 || {
+	echo "'hexdump -R' is not available" >&2
+	SKIP=1
+	exit 1
+}
+
 # ls -ln is showing date. Need to remove that, it's variable
 # sed: coalesce spaces
 # cut: remove date
@@ -24,6 +31,9 @@
 00000090  14 24 19 07 a4 63 00
 "
 
+user=$(id -u)
+group=$(id -g)
+
 rm -rf cpio.testdir
 
 # testing "test name" "options" "expected result" "file input" "stdin"
@@ -34,8 +44,8 @@
 "\
 1 blocks
 0
--rw-r--r-- 2 0 0 0 x
--rw-r--r-- 2 0 0 0 y
+-rw-r--r-- 2 $user $group 0 x
+-rw-r--r-- 2 $user $group 0 y
 " \
 	"" ""
 

Modified: trunk/busybox/testsuite/testing.sh
===================================================================
--- trunk/busybox/testsuite/testing.sh	2008-05-02 20:31:57 UTC (rev 21924)
+++ trunk/busybox/testsuite/testing.sh	2008-05-02 21:46:30 UTC (rev 21925)
@@ -4,28 +4,29 @@
 #
 # License is GPLv2, see LICENSE in the busybox tarball for full license text.
 
-# This file defines two functions, "testing" and "optionflag"
+# This file defines two functions, "testing" and "optional"
+# and a couple more...
 
 # The following environment variables may be set to enable optional behavior
 # in "testing":
 #    VERBOSE - Print the diff -u of each failed test case.
 #    DEBUG - Enable command tracing.
-#    SKIP - do not perform this test (this is set by "optionflag")
+#    SKIP - do not perform this test (this is set by "optional")
 #
 # The "testing" function takes five arguments:
-#	$1) Description to display when running command
-#	$2) Command line arguments to command
-#	$3) Expected result (on stdout)
-#	$4) Data written to file "input"
-#	$5) Data written to stdin
+#	$1) Test description
+#	$2) Command(s) to run. May have pipes, redirects, etc
+#	$3) Expected result on stdout
+#	$4) Data to be written to file "input"
+#	$5) Data to be written to stdin
 #
-# The exit value of testing is the exit value of the command it ran.
+# The exit value of testing is the exit value of $2 it ran.
 #
 # The environment variable "FAILCOUNT" contains a cumulative total of the
 # number of failed tests.
 
 # The "optional" function is used to skip certain tests, ala:
-#   optionflag CONFIG_FEATURE_THINGY
+#   optional CONFIG_FEATURE_THINGY
 #
 # The "optional" function checks the environment variable "OPTIONFLAGS",
 # which is either empty (in which case it always clears SKIP) or
@@ -35,15 +36,28 @@
 export FAILCOUNT=0
 export SKIP=
 
+# Helper for helpers. Oh my...
+test x"$ECHO" = x"" && {
+	ECHO="echo"
+	test x"`echo -ne`" = x"" || {
+		# Compile and use a replacement 'echo' which understands -e -n
+		ECHO="$PWD/echo-ne"
+		test -x "$ECHO" || {
+			gcc -Os -o "$ECHO" ../scripts/echo.c || exit 1
+		}
+	}
+	export ECHO
+}
+
 # Helper functions
 
 optional()
 {
-  option=`echo "$OPTIONFLAGS" | egrep "(^|:)$1(:|\$)"`
+  option=`echo ":$OPTIONFLAGS:" | grep ":$1:"`
   # Not set?
   if [ -z "$1" ] || [ -z "$OPTIONFLAGS" ] || [ ${#option} -ne 0 ]
   then
-    SKIP=""
+    SKIP=
     return
   fi
   SKIP=1
@@ -54,7 +68,7 @@
 testing()
 {
   NAME="$1"
-  [ -z "$1" ] && NAME=$2
+  [ -z "$1" ] && NAME="$2"
 
   if [ $# -ne 5 ]
   then
@@ -70,10 +84,10 @@
     return 0
   fi
 
-  echo -ne "$3" > expected
-  echo -ne "$4" > input
+  $ECHO -ne "$3" > expected
+  $ECHO -ne "$4" > input
   [ -z "$VERBOSE" ] || echo "echo '$5' | $2"
-  echo -ne "$5" | eval "$2" > actual
+  $ECHO -ne "$5" | eval "$2" > actual
   RETVAL=$?
 
   cmp expected actual >/dev/null 2>/dev/null
@@ -101,7 +115,7 @@
 {
   [ $# -lt 2 ] && return
 
-  echo -n .
+  $ECHO -n .
 
   dest=$1
   shift
@@ -136,7 +150,7 @@
 
   # Copy utilities from command line arguments
 
-  echo -n "Setup chroot"
+  $ECHO -n "Setup chroot"
   mkchroot tmpdir4chroot $*
   echo
 
@@ -152,4 +166,3 @@
   umount -l tmpdir4chroot
   rmdir tmpdir4chroot
 }
-




More information about the busybox-cvs mailing list