Copy linux kernel from 0x00040000 to 0x30008000, size = 0x00100000 ... done zImage magic = 0x016f2818 Setup linux parameters at 0x30000100. Total memory is 0x04000000 linux command line is: "root=/dev/mtdblock3 console=ttyS0" MACH_TYPE = 362 NOW, Booting Linux...... Uncompressing Linux..................................................................... done, booting the kernel. Linux version 2.6.16.4 (root@haohuibin) (gcc version 3.3) #638 Mon Aug 4 11:59:45 CST 2008 CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T) Machine: LMT Memory policy: ECC disabled, Data cache writeback CPU S3C2440A (id 0x32440001) S3C2440: core 399.651 MHz, memory 99.912 MHz, peripheral 49.956 MHz S3C2410 Clocks, (c) 2004 Simtec Electronics CLOCK: Slow mode (2.116 MHz), fast, MPLL on, UPLL on CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Built 1 zonelists Kernel command line: root=/dev/mtdblock3 console=ttyS0 irq: clearing pending ext status 00000020 irq: clearing subpending status 00000003 irq: clearing subpending status 00000002 PID hash table entries: 512 (order: 9, 8192 bytes) timer tcon=00500000, tcnt a29d, tcfg 00000200,00000000, usec 00001ebf Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB = 64MB total Memory: 62604KB available (1880K code, 230K data, 84K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C2440: Initialising architecture S3C2440: IRQ Support S3C2440: Clock Support, UPLL 47.980 MHz, DVS off SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 yaffs Aug 4 2008 11:57:59 Installing. io scheduler noop registered (default) Console: switching to mono frame buffer device 20x20 fb0: s3c2410fb frame buffer device S3C2410 RTC, (c) 2004 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: tts0 at MMIO 0xe1500000 (irq = 18) is a 16550A serial8250: tts1 at MMIO 0xe1500008 (irq = 19) is a 16550A s3c2440-uart.0: ttyS0 at MMIO 0x50000000 (irq = 70) is a S3C2440 s3c2440-uart.1: ttyS1 at MMIO 0x50004000 (irq = 73) is a S3C2440 s3c2440-uart.2: ttyS2 at MMIO 0x50008000 (irq = 76) is a S3C2440 loop: loaded (max 8 devices) physmap flash device: 800000 at 0 phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled cmdlinepart partition parsing not available RedBoot partition parsing not available Using physmap partition definition Creating 4 MTD partitions on "phys_mapped_flash": 0x00000000-0x00020000 : "vivi" 0x00020000-0x00040000 : "param" 0x00040000-0x00140000 : "kernel" 0x00140000-0x00800000 : "root" S3C2440 NAND Driver, (c) 2006 Consys, Inc NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver input: KeyPad as /class/input/input0 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 usb 1-1: new full speed USB device using s3c2410-ohci and address 2 usb 1-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices IP-Config: No network devices available. VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 84K mkdir: cannot create directory '/dev/pts': Read-only file system mount: mounting devpts on /dev/pts failed: No such file or directory mdev: /etc/mdev.conf: No such file or directory mdev: mknod mtdblock4: Read-only file system mount: mounting devpts on /dev/pts failed: No such file or directory mount: mounting configfs on /config failed: No such device Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Vendor: Teclast Model: CoolFlash Rev: 0.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 1007616 512-byte hdwr sectors (516 MB) sda: Write Protect is off sda: assuming drive cache: write through SCSI device sda: 1007616 512-byte hdwr sectors (516 MB) sda: Write Protect is off sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi removable disk sda Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory Can't open /dev/tty1: No such file or directory Can't open /dev/tty2: No such file or directory Can't open /dev/tty3: No such file or directory