[Buildroot] building U-Boot fw_printenv

[Jacques Samoun]

Thanks !
Found it and it works perfectly.

rgds,
Jacques

On Thu, Nov 11, 2021 at 10:28 AM Yann E. MORIN <yann.morin.1998 at free.fr>
wrote:

> Jacques, All,
>
> On 2021-11-11 09:55 +0200, Jacques Samoun spake thusly:
> > i am using BR off tag 2020.01, and using U-Boot as a bootloader (ARM
> platform).
> > I am just unable to make U-Boot build env tools, namely fw_printenv.
> > I obviously verified the fw_printenv.c and makefile are indeed present
> in tools/env.
> > I tried a few settings, but am mot able to get this tool built. None of
> the settings, either from BR or Uboot seem to be able to do
> > that.
> > Am i missing something  basic here ?
>
> If you need fw_printenv on the target, you'll need to look at
> uboot-tools (BR2_PACKAGE_UBOOT_TOOLS); if you want it at build time,
> you'll want host-uboot-tools (BR2_PACKAGE_HOST_UBOOT_TOOLS).
>
> Regards,
> Yann E. MORIN.
>
> --
>
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics'
> conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___
>      |
> | +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is
> no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v
>  conspiracy.  |
>
> '------------------------------^-------^------------------^--------------------'
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.buildroot.org/pipermail/buildroot/attachments/20211111/fdacaa16/attachment.html>