[Buildroot] [git commit] board/raspberrypi/genimage-raspberrypi3.cfg: beautify file

Arnout Vandecappelle (Essensium/Mind) arnout at mind.be
Mon Nov 8 21:59:33 UTC 2021


commit: https://git.buildroot.net/buildroot/commit/?id=fe6fc735bd9cf35197450f2cb5cccd56dd12afd6
branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master

Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.

Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
---
 board/raspberrypi/genimage-raspberrypi3.cfg | 53 +++++++++++++++--------------
 1 file changed, 27 insertions(+), 26 deletions(-)

diff --git a/board/raspberrypi/genimage-raspberrypi3.cfg b/board/raspberrypi/genimage-raspberrypi3.cfg
index 0a547241f4..a617823379 100644
--- a/board/raspberrypi/genimage-raspberrypi3.cfg
+++ b/board/raspberrypi/genimage-raspberrypi3.cfg
@@ -1,33 +1,34 @@
 image boot.vfat {
-  vfat {
-    files = {
-      "bcm2710-rpi-3-b.dtb",
-      "bcm2710-rpi-3-b-plus.dtb",
-      "bcm2710-rpi-cm3.dtb",
-      "rpi-firmware/bootcode.bin",
-      "rpi-firmware/cmdline.txt",
-      "rpi-firmware/config.txt",
-      "rpi-firmware/fixup.dat",
-      "rpi-firmware/start.elf",
-      "rpi-firmware/overlays",
-      "zImage"
-    }
-  }
-  size = 32M
+	vfat {
+		files = {
+			"bcm2710-rpi-3-b.dtb",
+			"bcm2710-rpi-3-b-plus.dtb",
+			"bcm2710-rpi-cm3.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
 }
 
 image sdcard.img {
-  hdimage {
-  }
+	hdimage {
+	}
 
-  partition boot {
-    partition-type = 0xC
-    bootable = "true"
-    image = "boot.vfat"
-  }
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
 
-  partition rootfs {
-    partition-type = 0x83
-    image = "rootfs.ext4"
-  }
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
 }


More information about the buildroot mailing list