[Buildroot] [PATCH/RFC 03/28] support/testing/tests/boot/test_atf: update U-Boot in TestATFAllwinner

[Sergey Matyukevich]

Bump U-Boot version in TestATFAllwinner. Updating U-Boot version to
2021.04 requires the following two changes.

First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.

Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.

Signed-off-by: Sergey Matyukevich <geomatsi at gmail.com>
---
 support/testing/tests/boot/test_atf.py | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/support/testing/tests/boot/test_atf.py b/support/testing/tests/boot/test_atf.py
index c86c32092c..a5037b4b27 100644
--- a/support/testing/tests/boot/test_atf.py
+++ b/support/testing/tests/boot/test_atf.py
@@ -42,16 +42,15 @@ class TestATFAllwinner(infra.basetest.BRTest):
         BR2_TARGET_UBOOT=y
         BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
         BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-        BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
+        BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04"
         BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m64"
         BR2_TARGET_UBOOT_NEEDS_DTC=y
         BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
         BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
         BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-        BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-        BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
         BR2_TARGET_UBOOT_SPL=y
-        BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+        BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+        BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null"
         """
 
     def test_run(self):
-- 
2.31.1