[Buildroot] [PATCH v3 0/7] Support for the BeagleV platform
Drew Fustini
drew at beagleboard.org
Fri May 14 21:06:18 UTC 2021
On Tue, May 4, 2021 at 1:51 PM Thomas Petazzoni
<thomas.petazzoni at bootlin.com> wrote:
>
> Hello,
>
> Here is a third iteration of the BeagleV patch series, which brings a
> few fixes:
>
> * The post-build script of v1 calling "make printvars" was working
> only for in-tree builds. Following a comment from Frank Hunleth on
> the v1, it was changed in v2 to use "make -C ${O} printvars", which
> made out-of-tree builds work, but broke in-tree builds. So in this
> new version, we introduced a preliminary patch that exposes
> $(CONFIG_DIR) to post-build/post-image scripts, to make such "make
> printvars" invocations possible.
>
> * The beaglev_defconfig is updated to take into account the rename of
> the Git repositories by Starfive for Linux, U-Boot and OpenSBI.
>
> * Reviewed-by tags from Bin Meng are added on beaglev-ddrinit,
> beaglev-secondboot and the corresponding beaglev_defconfig
> update. Thanks Bin!
>
> As usual, the whole thing is also available at:
>
> https://github.com/tpetazzoni/buildroot/commits/beaglev
>
> Best regards,
>
> Thomas Petazzoni
>
> Thomas Petazzoni (7):
> package/Makefile.in: expose CONFIG_DIR to post-build/post-image
> scripts
> boot/opensbi: add options to enable/disable image installation
> configs/beaglev_defconfig: new defconfig
> package/riscv64-elf-toolchain: new package
> boot/beaglev-ddrinit: new package
> boot/beaglev-secondboot: new package
> configs/beaglev: enable building of low-level firmware
>
> DEVELOPERS | 5 +
> board/beaglev/extlinux.conf | 4 +
> board/beaglev/genimage.cfg | 12 ++
> ...s-starfive-vic7100-adjust-fdt_addr_r.patch | 39 ++++++
> board/beaglev/post-build.sh | 17 +++
> board/beaglev/readme.txt | 122 ++++++++++++++++++
> boot/Config.in | 2 +
> boot/beaglev-ddrinit/Config.in | 9 ++
> boot/beaglev-ddrinit/beaglev-ddrinit.mk | 29 +++++
> boot/beaglev-secondboot/Config.in | 9 ++
> boot/beaglev-secondboot/beaglev-secondboot.mk | 29 +++++
> boot/opensbi/Config.in | 20 +++
> boot/opensbi/opensbi.mk | 16 ++-
> configs/beaglev_defconfig | 37 ++++++
> docs/manual/customize-post-image.txt | 3 +-
> docs/manual/customize-rootfs.txt | 3 +
> package/Makefile.in | 1 +
> .../riscv64-elf-toolchain.mk | 25 ++++
> 18 files changed, 375 insertions(+), 7 deletions(-)
> create mode 100644 board/beaglev/extlinux.conf
> create mode 100644 board/beaglev/genimage.cfg
> create mode 100644 board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch
> create mode 100755 board/beaglev/post-build.sh
> create mode 100644 board/beaglev/readme.txt
> create mode 100644 boot/beaglev-ddrinit/Config.in
> create mode 100644 boot/beaglev-ddrinit/beaglev-ddrinit.mk
> create mode 100644 boot/beaglev-secondboot/Config.in
> create mode 100644 boot/beaglev-secondboot/beaglev-secondboot.mk
> create mode 100644 configs/beaglev_defconfig
> create mode 100644 package/riscv64-elf-toolchain/riscv64-elf-toolchain.mk
>
> --
> 2.30.2
>
Thank you so much again for getting support added to buildroot.
I wanted to note that Kali Prasad (cc'd) has developed a very helpful
bootloader recovery tool [1] that is a simple C program and would
probably be useful to include in the beaglev buildroot config. This
works around the problem that the BootROM in the StarFive JH7100 has a
buggy xmodem crc implementation that did not work with any of the
existing open source terminal emulators.
-Drew
[1] https://github.com/kprasadvnsi/JH71xx-tools
More information about the buildroot
mailing list