[Buildroot] Porting a vendor specific yocto layer to the buildroot
Baruch Siach
baruch at tkos.co.il
Tue Jan 26 08:48:29 UTC 2021
Hi scd,
On Mon, Jan 25 2021, scd rjcom wrote:
> Thank you! I understand that the vendor specific layers have their own
> packages and customizations.
>
> I was looking for some generic guidelines to perform this. (Assuming that
> all the packages are open source)
>
> It would be great if buildroot documentation will provide some guidelines
> to perform the porting of the Yocto layers to Buildroot.
Not exactly what you are asking, but these might help you anyway:
https://elinux.org/images/9/9a/Buildroot-vs-Yocto-Differences-for-Your-Daily-Job-Luca-Ceresoli-AIM-Sportline.pdf
https://youtu.be/wCVYQWFIvBs
Thanks to Luca.
baruch
> On Mon, Jan 25, 2021 at 11:28 AM Peter Korsgaard <peter at korsgaard.com>
> wrote:
>
>> >>>>> "scdrj" == scdrj <scdrjcom at gmail.com> writes:
>>
>> > How do I port a vendor specific yocto layer to the buildroot?
>>
>> One step at a time?
>>
>> No seriously, it is hard to know without knowing what that layer
>> does. You will need to have a look at everything it does and add
>> packages and rootfs overlays / post-build scripts to do the same thing
>> in Buildroot.
>>
>> --
>> Bye, Peter Korsgaard
>>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
More information about the buildroot
mailing list