[Buildroot] OpenSSL & Mosquitto on ARM Cortex M7

RR rob.r374 at gmail.com
Mon Nov 2 10:33:00 UTC 2020


Hello,

I've got one step further, but still don't know how to solve it. 
It seems that mosquitto is compiled in a bit different way as other working
binaries in nommu and flat file format environment
(ARM Cortex M7).

For example, when I check dropbear binary (which works) and mosquitto which
segfaults with flthdr I get output below.
I'm not sure if this is the cause of segfault, but would like to check
whether it is ok or not.

What is the difference between Load-to-Ram and Has-PIC-GOT flags? 
It seems that I can add Load-to-Ram to Has-PIC-GOT using flthdr tool, but
cannot get rid ot "Has-PIC-GOT" flag.

Thanks in advance,
Regards,
Rob.


Flthdr output:

 ./dropbearkey
    Magic:        bFLT
    Rev:          4
    Build Date:   Mon Nov  2 00:02:47 2020
    Entry:        0x45
    Data Start:   0x2d374
    Data End:     0x3bd88
    BSS End:      0x51f00
    Stack Size:   0x1000
    Reloc Start:  0x3bd88
    Reloc Count:  0xa6b
    Flags:        0x1 ( Load-to-Ram )

./mosquitto_pub
    Magic:        bFLT
    Rev:          4
    Build Date:   Mon Nov  2 01:47:54 2020
    Entry:        0x45
    Data Start:   0xd17b0
    Data End:     0x144e40
    BSS End:      0x14c0c0
    Stack Size:   0x100000
    Reloc Start:  0x144e40
    Reloc Count:  0x2d68
    Flags:        0x2 ( Has-PIC-GOT )

When I run those files :

~ # mosquitto_pub
warn_alloc: 1 callbacks suppressed
mosquitto_pub: page allocation failure: order:8, mode:0xcc0(GFP_KERNEL),
nodemask=(null)
nommu: Allocation of length 860160 from process 169 (mosquitto_pub) failed
binfmt_flat: Unable to mmap process text, errno -12
SEGV

~ # dropbearkey
Must specify a key filename
Usage: dropbearkey -t <type> -f <filename> [-s bits]
-t type Type of key to generate. One of:
                rsa
                ecdsa
-f filename    Use filename for the secret key.
               ~/.ssh/id_dropbear is recommended for client keys.
-s bits Key size in bits, should be a multiple of 8 (optional)
           ECDSA has sizes 256 384 521 
-y              Just print the publickey and fingerprint for the
                private key in <filename>.


-----Original Message-----
From: rob.r374 at gmail.com <rob.r374 at gmail.com> 
Sent: Wednesday, October 28, 2020 2:30 AM
To: 'Peter Seiderer' <ps.report at gmx.net>
Cc: buildroot at busybox.net
Subject: RE: [Buildroot] OpenSSL & Mosquitto on ARM Cortex M7

Hello,

thanks Peter... You've helped me a lot.

Compile now goes ok, but when I run on target I get :
~ # mosquitto_pub
mosquitto_pub: page allocation failure: order:8, mode:0xcc0(GFP_KERNEL),
nodemask=(null)
nommu: Allocation of length 860160 from process 59 (mosquitto_pub) failed
binfmt_flat: Unable to mmap process text, errno -12 SEGV

And if I try to check flat file format and stack size of binary, I cannot
access binary from build system :
/buildroot/output/host/arm-buildroot-uclinux-uclibcgnueabi/bin$ ./flthdr -p
./../../../target/usr/bin/mosquitto_pub
Cannot open ./../../../target/usr/bin/mosquitto_pub

So I cannot check stack size and I'm trapped. 
Is there any other option to declare stack size in compilation step of
mosquitto under buildroot ?
Any advice? Anyone more experienced on these non-mmu and flat file format
devices ?

Thanks in advance,
Regards,
Rob.



-----Izvirno sporočilo-----
Od: Peter Seiderer <ps.report at gmx.net>
Poslano: torek, 27. oktober 2020 23:08
Za: RR <rob.r374 at gmail.com>
Kp: buildroot at busybox.net
Zadeva: Re: [Buildroot] OpenSSL & Mosquitto on ARM Cortex M7

Hello Rob,

On Tue, 27 Oct 2020 08:41:38 +0100, "RR" <rob.r374 at gmail.com> wrote:

> Hello Peter,
>
> thank you a lot. It seems that compilation now goes ok.
> It seems that I'm closer to the solution.
>
> In runtime, I get error on memory allocation. Probably I need to 
> increase related stack-size, but don't know how to.
> Is now problem only related to add more stack size ? If yes, how can I 
> do this ?
> If not, please give me advice what to do next...

Sorry, did not own a sample of your hardware (and lacking any experience on
this type of 'small' embedded systems), so no more help from my side...

Regards,
Peter

>
> The only way I found was  _FLAT_STACKSIZE but I haven't found any 
> examples on how to use it.
> Adding MOSQUITTO_FLAT_STACKSIZE=1048576 didn't help. I was  probably 
> doing it wrong way...
> Also, mosquitto produces more binaries as  output...
>
> Thanks in advance,
> Regards,
> Rob.
>
> Command line:
> ~ # free
>                         total        used        free      shared
> buff/cache   available
> Mem:          11864        6728        3908           0        1228
> 3460
>
> ~ # mosquitto_pub -d --debug -h xxxxxxxxxxxxx  -t yyyyyyyyyyyyy -m 
> Test -i mo
> sq_pub111 --cafile /etc/res/ca.crt -p 8883  --cert /etc/res/client.crt 
> --key /et c/res/client.key --insecure --repeat 10000 --repeat-delay 10
> mosquitto_pub: page allocation failure: order:8, 
> mode:0xcc0(GFP_KERNEL),
> nodemask=(null)
> nommu: Allocation of length 860160 from process 67 (mosquitto_pub) 
> failed
> binfmt_flat: Unable to mmap process text, errno -12 SEGV
>
>
> DMESG:
> Mem-Info:
> active_anon:0 inactive_anon:0 isolated_anon:0
> active_file:0 inactive_file:20 isolated_file:0
> unevictable:202 dirty:0 writeback:0 unstable:0
> slab_reclaimable:0 slab_unreclaimable:809
> mapped:0 shmem:0 pagetables:0 bounce:0
> free:1140 free_pcp:0 free_cma:0
> Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB 
> inactive_file:80kB unevictable:808kB isolated(anon):0kB 
> isolated(file):0kB mapped:0kB dirty:0kB writeback:0kB shmem:0kB 
> writeback_tmp:0kB unstable:0kB all_unreclaimable? no Normal 
> free:4560kB min:432kB low:540kB high:648kB reserved_highatomic:0KB 
> active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:80kB 
> unevictable:808kB writepending:0kB present:15296kB managed:11864kB 
> mlocked:0kB kernel_stack:280kB pagetables:0kB bounce:0kB free_pcp:0kB 
> local_pcp:0kB free_cma:0kB
> lowmem_reserve[]: 0 0
> Normal: 30*4kB (UM) 29*8kB (UM) 11*16kB (UM) 8*32kB (UM) 11*64kB (UM) 
> 4*128kB (M) 4*256kB (UM) 3*512kB (M) 0*1024kB 0*2048kB 0*4096kB = 
> 4560kB
> 222 total pagecache pages
> 3824 pages RAM
> 0 pages HighMem/MovableOnly
> 858 pages reserved
> nommu: Allocation of length 860160 from process 67 (mosquitto_pub) 
> failed
> active_anon:0 inactive_anon:0 isolated_anon:0
> active_file:0 inactive_file:20 isolated_file:0
> unevictable:202 dirty:0 writeback:0 unstable:0
> slab_reclaimable:0 slab_unreclaimable:809
> mapped:0 shmem:0 pagetables:0 bounce:0
> free:1140 free_pcp:0 free_cma:0
> Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB 
> inactive_file:80kB unevictable:808kB isolated(anon):0kB 
> isolated(file):0kB mapped:0kB dirty:0kB writeback:0kB shmem:0kB 
> writeback_tmp:0kB unstable:0kB all_unreclaimable? no Normal 
> free:4560kB min:432kB low:540kB high:648kB reserved_highatomic:0KB 
> active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:80kB 
> unevictable:808kB writepending:0kB present:15296kB managed:11864kB 
> mlocked:0kB kernel_stack:280kB pagetables:0kB bounce:0kB free_pcp:0kB 
> local_pcp:0kB free_cma:0kB
> lowmem_reserve[]: 0 0
> Normal: 30*4kB (UM) 29*8kB (UM) 11*16kB (UM) 8*32kB (UM) 11*64kB (UM) 
> 4*128kB (M) 4*256kB (UM) 3*512kB (M) 0*1024kB 0*2048kB 0*4096kB = 
> 4560kB
> 222 total pagecache pages
> binfmt_flat: Unable to mmap process text, errno -12
>
> ----------------------------------------------------------------------
> ------
> ----------------------------------------------------------------------
> ------
> ----------------------------------------------------------------------
> ------
> ---
> -----Original Message-----
> From: Peter Seiderer <ps.report at gmx.net>
> Sent: Sunday, October 25, 2020 10:22 PM
> To: RR <rob.r374 at gmail.com>
> Cc: buildroot at busybox.net
> Subject: Re: [Buildroot] OpenSSL & Mosquitto on ARM Cortex M7
>
> Hello Rob,
>
> On Sun, 25 Oct 2020 11:33:05 +0100, "RR" <rob.r374 at gmail.com> wrote:
>
> > Hello,
> >
> > I'm enclosing my defconfig... I'm basically compiling for ARM
> > Cortex-M7
> > (stm32f769 discovery board).
> >
> > What I have additionally spotted is that mosquiotto_sub doesn't 
> > crash with same error, but it doesn't have ssl options working.
> > So probably my first problem is that libopenssl doesn't compile
> properly...
> >
> > When I try to compile it separately, by using
> > 	make libopenssl-reconfigure
> >
> > it seems that it doesn't have target architecture defined. If I add 
> > BR2_PACKAGE_TARGET_ARCH="arm-v4" to make call, I end up in error of 
> > missing file (it's also weird why win32 files are included in 
> > compilation at all) :
> >
> > /home/robi/Razvoj/Linux/Buildroot/JE_UcLinux/buildroot/../host/bin/a
> > rm -build root-uclinux-uclibcgnueabi-gcc  -I. -Iinclude -fPIC 
> > -pthread -Wa,--noexecstack -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
> > -D_FILE_OFFSET_BITS=64  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
> > -D_FILE_OFFSET_BITS=64  -Os    -Wl,-elf2flt -static -DHAVE_FORK=0
> > -DOPENSSL_NO_MADVISE -DOPENSSL_NO_ASYNC    -Wl,-elf2flt -static
> > -DOPENSSL_USE_NODELETE -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ 
> > -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM 
> > -DSHA512_ASM -DKECCAK1600_ASM -DAES_ASM -DBSAES_ASM -DGHASH_ASM 
> > -DECP_NISTZ256_ASM -DPOLY1305_ASM -DOPENSSLDIR="\"/etc/ssl\""
> > -DENGINESDIR="\"/usr/lib/engines-1.1\"" -DZLIB -DNDEBUG 
> > -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 
> > -MMD -MF crypto/dso/dso_win32.d.tmp -MT crypto/dso/dso_win32.o -c -o 
> > crypto/dso/dso_win32.o crypto/dso/dso_win32.c
> > crypto/dso/dso_dlfcn.c:28:12: fatal error: dlfcn.h: No such file or 
> > directory  #  include <dlfcn.h>
> >             ^~~~~~~~~
> > compilation terminated.
> >
> > Any advice where I can learn or get libopenssl compiled properly?
>
> Use buildroot and take a look at the log and/or compile output...
>
>
> >  Then I can proceed to mosquitto, because it uses libopenssl.
>
> The following defconfig compiles fine (no runtime test because of lack 
> of
> hardware):
>
> BR2_arm=y
> BR2_cortex_m7=y
> BR2_TOOLCHAIN_BUILDROOT_CXX=y
> BR2_PACKAGE_HOST_ELF2FLT=y
> BR2_SYSTEM_DHCP="eth0"
> BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> BR2_PACKAGE_SDL=y
> BR2_PACKAGE_SDL_TTF=y
> BR2_PACKAGE_MBEDTLS=y
> BR2_PACKAGE_OPENSSL=y
> BR2_PACKAGE_LIBOPENSSL_BIN=y
> BR2_PACKAGE_LIBPTHREAD_STUBS=y
> BR2_PACKAGE_DROPBEAR=y
> BR2_PACKAGE_MOSQUITTO=y
> BR2_PACKAGE_NET_TOOLS=y
> BR2_TARGET_ROOTFS_EXT2=y
> # BR2_TARGET_ROOTFS_TAR is not set
> BR2_PACKAGE_HOST_OPENOCD=y
>
>
> The mosquitto package compile gets the right make options, e.g.:
>
> /usr/bin/make -j17 -C .../build/mosquitto-1.6.12 [...] WITH_WRAP=no 
> WITH_DOCS=no WITH_STATIC_LIBRARIES=yes WITH_SHARED_LIBRARIES=no 
> WITH_ADNS=no WITH_THREADING=no WITH_TLS=yes 
> CLIENT_STATIC_LDADD="`/home/seiderer/Work/Buildroot/build_openssl_mosq
> uitto_ 001/host/bin/pkg-config --libs openssl`" WITH_SRV=no 
> WITH_WEBSOCKETS=no
>
>
> > I'm probably doing something obviously wrong...
> > I'm using buildroot release tag 2020.05...
> >
> > Thanks in advance,
> > Regards,
> >
> > -----Original Message-----
> > From: Peter Seiderer <ps.report at gmx.net>
> > Sent: Monday, October 19, 2020 9:11 PM
> > To: rob.r374 at gmail.com
> > Cc: buildroot at busybox.net
> > Subject: Re: [Buildroot] OpenSSL & Mosquitto on ARM Cortex M7
> >
> > Hello Rob,
> >
> > On Mon, 19 Oct 2020 02:20:00 +0200, <rob.r374 at gmail.com> wrote:
> >
> > > Hello,
> > >
> > >
> > >
> > > I'm trying to include Mosquitto with OpenSSL support on Buildroot.
> > >
> > >
> > >
> > > On working Buildroot basic build, I've added packages and setup 
> > > static libs
> > > :
> > >
> > > BR2_PACKAGE_LIBOPENSSL=y
> > >
> > > BR2_PACKAGE_MOSQUITTO=y
> > >
> > > BR2_PACKAGE_MBEDTLS=y
> > >
> > > BR2_STATIC_LIBS=y
> > >
> > > If I try to run Mosquitto tools (and MbedTLS test), I get :
> > >
> > > ~ # mosquitto_pub
> > >
> > > binfmt_flat: reference 0xffb4d0 to shared library 127, killing 
> > > mosquitto_pub!
> > >
> > > SEGV
> > >
> > > ~ # mosquitto_sub
> > >
> > > Error: You must specify a topic to subscribe to.
> > >
> > > Use 'mosquitto_sub --help' to see usage.
> > >
> > >
> > >
> > > ~ # ssl_client2
> > >
> > > sh: can't execute 'ssl_client2': No such file or directory
>
> ssh_client2 is from mbedtls, but BR2_PACKAGE_MBEDTLS_PROGRAMS depends 
> on BR2_USE_MMU which is not set for your configuration...
>
> > >
> > >
> > >
> > > It's weird, because mosquitto_pub complains about shared lib, but 
> > > I have defined static libraries only (at least I think so).
> > >
> > > In addition, mosquitto_sub works, but it seems it doesn't receive 
> > > SSL related arguments - seems like it was not compiled with 
> > > OpenSSL
lib.
>
> What do your mean with 'doesn't receive SSL related arguments'?
>
> Did your try a full re-build?
>
> Regards,
> Peter
>
>
> > >
> > > Also, ssl_client2 or other tools from MbedTLS cannot be found.
> > >
> > >
> > >
> > > How to solve those problems ?
> > >
> > >
> > >
> > > Also I'm not sure how to check for each package - compilation, 
> > > installation, errors, warnings etc.
> >
> > Did you do/try a full rebuild after changing your config ([1])?
> >
> > If the problem still exists after a full rebuild please provide your 
> > .config or defconfig file and the buildroot version your are using...
> >
> > Regards,
> > Peter
> >
> > [1] https://buildroot.org/downloads/manual/manual.html#full-rebuild
> >
> > >
> > >
> > >
> > > Regards,
> > >
> > > Rob.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>



--
Ta e-pošta je bila pregledana z Avast protivirusnim programom.
https://www.avast.com/antivirus




More information about the buildroot mailing list