[Buildroot] [PATCH 3/4] configs/nanopi_m4: new defconfig
sunil at amarulasolutions.com
sunil at amarulasolutions.com
Sat Jun 13 18:32:33 UTC 2020
From: Suniel Mahesh <sunil at amarulasolutions.com>
A defconfig for the friendlyarm nanopi-m4 was added in
493c3979a4def978a1137cf8543bf0de50d2615e, but then removed
in a24bd8936f57a590f810e14d7828cf1bddce580e because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- readme updated
- GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.46
Signed-off-by: Suniel Mahesh <sunil at amarulasolutions.com>
---
NOTE:
- new patch
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 ++
board/friendlyarm/nanopi-m4/extlinux.conf | 4 +++
board/friendlyarm/nanopi-m4/genimage.cfg | 39 +++++++++++++++++++++
board/friendlyarm/nanopi-m4/post-build.sh | 5 +++
board/friendlyarm/nanopi-m4/readme.txt | 45 +++++++++++++++++++++++++
configs/nanopi_m4_defconfig | 56 +++++++++++++++++++++++++++++++
7 files changed, 152 insertions(+)
create mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
create mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
create mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
create mode 100644 board/friendlyarm/nanopi-m4/readme.txt
create mode 100644 configs/nanopi_m4_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 66c7b72..4ff0b4b 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -227,6 +227,7 @@ mx6sx_udoo_neo_defconfig: { extends: .defconfig }
mx6udoo_defconfig: { extends: .defconfig }
nanopi_m1_defconfig: { extends: .defconfig }
nanopi_m1_plus_defconfig: { extends: .defconfig }
+nanopi_m4_defconfig: { extends: .defconfig }
nanopi_neo4_defconfig: { extends: .defconfig }
nanopi_neo_defconfig: { extends: .defconfig }
nanopi_r1_defconfig: { extends: .defconfig }
diff --git a/DEVELOPERS b/DEVELOPERS
index 6b7421a..220bb34 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2392,8 +2392,10 @@ F: package/powertop/
N: Suniel Mahesh <sunil at amarulasolutions.com>
F: board/firefly/
+F: board/friendlyarm/nanopi-m4
F: board/orangepi/orangepi-rk3399
F: board/pine64/rockpro64
+F: configs/nanopi_m4_defconfig
F: configs/orangepi_rk3399_defconfig
F: configs/roc_pc_rk3399_defconfig
F: configs/rockpro64_defconfig
diff --git a/board/friendlyarm/nanopi-m4/extlinux.conf b/board/friendlyarm/nanopi-m4/extlinux.conf
new file mode 100644
index 0000000..fb24f09
--- /dev/null
+++ b/board/friendlyarm/nanopi-m4/extlinux.conf
@@ -0,0 +1,4 @@
+label RK3399_NANOPI_M4 linux
+ kernel /Image
+ devicetree /rk3399-nanopi-m4.dtb
+ append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
diff --git a/board/friendlyarm/nanopi-m4/genimage.cfg b/board/friendlyarm/nanopi-m4/genimage.cfg
new file mode 100644
index 0000000..8a2e981
--- /dev/null
+++ b/board/friendlyarm/nanopi-m4/genimage.cfg
@@ -0,0 +1,39 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "rk3399-nanopi-m4.dtb",
+ "extlinux"
+ }
+ }
+ size = 112M
+}
+
+image sdcard.img {
+
+ hdimage {
+ gpt = true
+ }
+
+ partition loader1 {
+ image = "idbloader.img"
+ offset = 32K
+ }
+
+ partition loader2 {
+ image = "u-boot.itb"
+ offset = 8M
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 16M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/friendlyarm/nanopi-m4/post-build.sh b/board/friendlyarm/nanopi-m4/post-build.sh
new file mode 100755
index 0000000..ba29375
--- /dev/null
+++ b/board/friendlyarm/nanopi-m4/post-build.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-m4/readme.txt b/board/friendlyarm/nanopi-m4/readme.txt
new file mode 100644
index 0000000..4a606cf
--- /dev/null
+++ b/board/friendlyarm/nanopi-m4/readme.txt
@@ -0,0 +1,45 @@
+FriendlyARM NANOPI-M4
+=====================
+
+Build:
+
+ $ make nanopi_m4_defconfig
+ $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.elf
+├── boot.vfat
+├── extlinux
+├── idbloader.img
+├── Image
+├── rk3399-nanopi-m4.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+└── u-boot.itb
+
+Creating bootable SD card:
+==========================
+
+Simply invoke (as root)
+
+sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device
+
+Serial console
+--------------
+
+Baudrate for this board is 1500000
+
+Login:
+------
+Enter 'root' as login user, and the prompt is ready.
+
+https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/nanopi_m4.html
diff --git a/configs/nanopi_m4_defconfig b/configs/nanopi_m4_defconfig
new file mode 100644
index 0000000..c824b15
--- /dev/null
+++ b/configs/nanopi_m4_defconfig
@@ -0,0 +1,56 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers same as kernel, a 5.4 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-m4-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.46"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-m4"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="nanopi-m4"
+BR2_TARGET_GENERIC_ISSUE="Welcome to NANOPI-M4"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="96M"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-m4/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-m4/post-build.sh"
--
2.7.4
More information about the buildroot
mailing list