[Buildroot] Build Fail: FONTCONFIG_VERSION = 2.13.1 - Can't find uuid

Peter Seiderer ps.report at gmx.net
Sat Jun 6 20:01:32 UTC 2020


Hello Ernie,

re-add CC: buildroot at busybox.net

On Sat, 6 Jun 2020 11:29:20 -0700, Ernie Carp <erniecarp2018 at gmail.com> wrote:

> Hello Peter,
>
> Sorry, sometimes Ernie is bad. I did not do a full rebuild. I will try that.
>
> Thank you,
> Ernie.

Please keep the mailing list on CC

Regards,
Peter

>
>
> On Sat, Jun 6, 2020 at 10:51 AM Peter Seiderer <ps.report at gmx.net> wrote:
>
> > Hello Ernie,
> >
> > On Sat, 6 Jun 2020 09:52:07 -0700, Ernie Carp <erniecarp2018 at gmail.com>
> > wrote:
> >
> > > Hello,
> > >
> > > I post this in case it helps someone else.
> > >
> > > Using Buildroot Version: 2020.08-git-00103-gc7cd1f0-dirty
> > > Board: atmel_sama5d27_som1_ek_mmc_dev_defconfig
> > > util-linux version - 2.35.1
> > >
> > > When enabling rrdtool, FONTCONFIG_VERSION = 2.13.1 fails with error:
> > >
> > > checking for UUID... no
> > > checking where uuid functions comes from... configure: error:
> > > *** uuid is required. install util-linux
> > >
> > > I checked, util-linux is installed and uuid is selected but build fails.
> > I
> > > don't know how to fix it properly so I used the older package makefile
> > from
> > > buildroot 2019.05-git-00237-gb643a75-dirty that has util-linux version
> > 2.33
> > > and now rrdtool and all dependencies build without error.
> >
> > The following defconfig compiles here without failure
> > (atmel_sama5d27_som1_ek_mmc_dev_defconfig with BR2_PACKAGE_RRDTOOL=y):
> >
> > BR2_arm=y
> > BR2_cortex_a5=y
> > BR2_ARM_ENABLE_NEON=y
> > BR2_ARM_ENABLE_VFP=y
> > BR2_ARM_INSTRUCTIONS_THUMB2=y
> > BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
> > BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
> > BR2_PTHREAD_DEBUG=y
> > BR2_TOOLCHAIN_BUILDROOT_CXX=y
> > BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> > BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> > BR2_ROOTFS_POST_SCRIPT_ARGS="-c
> > board/atmel/sama5d27_som1_ek_mmc/genimage.cfg"
> > BR2_LINUX_KERNEL=y
> > BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> > BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call
> > github,linux4sam,linux-at91,linux4sam-2020.04)/linux-at91-linux4sam-2020.04.tar.gz"
> > BR2_LINUX_KERNEL_DEFCONFIG="sama5"
> > BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_som1_ek"
> > BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> > BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> > BR2_PACKAGE_ALSA_UTILS=y
> > BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
> > BR2_PACKAGE_ALSA_UTILS_APLAY=y
> > BR2_PACKAGE_FFMPEG=y
> > BR2_PACKAGE_FFMPEG_GPL=y
> > BR2_PACKAGE_FFMPEG_SWSCALE=y
> > BR2_PACKAGE_MPG123=y
> > BR2_PACKAGE_BZIP2=y
> > BR2_PACKAGE_GZIP=y
> > BR2_PACKAGE_UNZIP=y
> > BR2_PACKAGE_XZ=y
> > BR2_PACKAGE_ZIP=y
> > BR2_PACKAGE_GDB=y
> > BR2_PACKAGE_LMBENCH=y
> > BR2_PACKAGE_DOSFSTOOLS=y
> > BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
> > BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
> > BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
> > BR2_PACKAGE_MMC_UTILS=y
> > BR2_PACKAGE_MTD=y
> > BR2_PACKAGE_RRDTOOL=y
> > BR2_PACKAGE_WILC1000_FIRMWARE=y
> > BR2_PACKAGE_EVTEST=y
> > BR2_PACKAGE_I2C_TOOLS=y
> > BR2_PACKAGE_RNG_TOOLS=y
> > BR2_PACKAGE_SETSERIAL=y
> > BR2_PACKAGE_SPI_TOOLS=y
> > BR2_PACKAGE_USBUTILS=y
> > BR2_PACKAGE_LIBDRM=y
> > BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
> > BR2_PACKAGE_DTC=y
> > BR2_PACKAGE_DTC_PROGRAMS=y
> > BR2_PACKAGE_BLUEZ5_UTILS=y
> > BR2_PACKAGE_BRIDGE_UTILS=y
> > BR2_PACKAGE_CAN_UTILS=y
> > BR2_PACKAGE_ETHTOOL=y
> > BR2_PACKAGE_IPERF=y
> > BR2_PACKAGE_IPROUTE2=y
> > BR2_PACKAGE_IPTABLES=y
> > BR2_PACKAGE_IW=y
> > BR2_PACKAGE_LRZSZ=y
> > BR2_PACKAGE_MII_DIAG=y
> > BR2_PACKAGE_OPENSSH=y
> > BR2_PACKAGE_WGET=y
> > BR2_PACKAGE_WIRELESS_TOOLS=y
> > BR2_PACKAGE_WPA_SUPPLICANT=y
> > BR2_PACKAGE_BASH=y
> > BR2_PACKAGE_HTOP=y
> > BR2_PACKAGE_VIM=y
> > BR2_TARGET_ROOTFS_EXT2=y
> > BR2_TARGET_ROOTFS_EXT2_4=y
> > BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> > BR2_TARGET_AT91BOOTSTRAP3=y
> > BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
> > BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call
> > github,linux4sam,at91bootstrap,v3.9.2)/at91bootstrap3-v3.9.2.tar.gz"
> > BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_som1_eksd_uboot"
> > BR2_TARGET_UBOOT=y
> > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> > BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
> > BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call
> > github,linux4sam,u-boot-at91,linux4sam-2020.04)/u-boot-at91-linux4sam-2020.04.tar.gz"
> > BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_som1_ek_mmc"
> > BR2_TARGET_UBOOT_NEEDS_DTC=y
> > BR2_PACKAGE_HOST_DOSFSTOOLS=y
> > BR2_PACKAGE_HOST_GENIMAGE=y
> > BR2_PACKAGE_HOST_MTOOLS=y
> >
> >
> > Are your sure you did a complete re-build (or at least a re-build of the
> > util-linux package) after enabling rrdtool (see [1])?
> >
> > Regards,
> > Peter
> >
> > [1] https://buildroot.org/downloads/manual/manual.html#full-rebuild
> >
> > >
> > > Regards,
> > > Ernie Carp
> >
> >



More information about the buildroot mailing list