[Buildroot] [PATCH 1/2] board/freescale: use correct ahab-container.img file name

Julien Olivain juju at cotds.org
Thu Feb 20 20:27:34 UTC 2020


Hi Thomas,

Patch looks good.  I successfully built and booted on i.MX8 MEK QM and 
QXP boards. Thanks!

On 2020-02-20 03:18, Thomas Petazzoni wrote:
> Commit 3f8ace002831a01ed6aec59b704bd92c8a3b957f
> ("board/freescale/common/imx: add support for i.MX8") had its
> conflicts incorrectly tweaked when applied to Buildroot. The
> ahab-container.img is installed with this name (ahab-container.img) by
> the imx-firmware package, and not mx8qm-ahab-container.img or
> mx8qx-ahab-container.img.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
> ---
>  board/freescale/common/imx/imx8-bootloader-prepare.sh | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/freescale/common/imx/imx8-bootloader-prepare.sh
> b/board/freescale/common/imx/imx8-bootloader-prepare.sh
> index 302fd00658..45c648e360 100755
> --- a/board/freescale/common/imx/imx8-bootloader-prepare.sh
> +++ b/board/freescale/common/imx/imx8-bootloader-prepare.sh
> @@ -28,9 +28,9 @@ main ()
>  		cp ${BINARIES_DIR}/bl31.bin ${BINARIES_DIR}/u-boot-atf.bin
>  		dd if=${BINARIES_DIR}/u-boot-hash.bin
> of=${BINARIES_DIR}/u-boot-atf.bin bs=1K seek=128
>  		if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" 
> ${BR2_CONFIG}; then
> -			${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append
> ${BINARIES_DIR}/mx8qm-ahab-container.img -c -scfw
> ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap
> ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out
> ${BINARIES_DIR}/imx8-boot-sd.bin
> +			${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append
> ${BINARIES_DIR}/ahab-container.img -c -scfw
> ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap
> ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out
> ${BINARIES_DIR}/imx8-boot-sd.bin
>  		else
> -			${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append
> ${BINARIES_DIR}/mx8qx-ahab-container.img -c -scfw
> ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap
> ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out
> ${BINARIES_DIR}/imx8-boot-sd.bin
> +			${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append
> ${BINARIES_DIR}/ahab-container.img -c -scfw
> ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap
> ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out
> ${BINARIES_DIR}/imx8-boot-sd.bin
>  		fi
>  	fi

Reviewed-by: Julien Olivain <juju at cotds.org>
Tested-by: Julien Olivain <juju at cotds.org>


More information about the buildroot mailing list