[Buildroot] [PATCH v5 9/9] board/nxp/ls1028ardb: new board

Changming Huang jerry.huang at nxp.com
Fri Feb 7 08:38:57 UTC 2020


This is to support NXP LS1028ARDB board in Buildroot.
The board is setup to track the Linux at 4.19 via NXP LSDK-19.09.

The target will build uboot and RCW binary with arm-trusted-firmware support.

board/nxp/ls1028ardb/: scripts related with ls1028ardb
nxp_ls1028ardb-64b_defconfig: defconfig boot from SD card

Signed-off-by: Changming Huang <jerry.huang at nxp.com>
---
changes since v4:
1. change the uboot version to LSDK-19.09-update-311219.
2. change the linux version to LSDK-19.09-update-311219-V4.19.
3. change the NXP atf version to LSDK-19.09-update-311219.

changes since v3:
1. merge previous version patch 8 and patch 9 to one.
2. split RCW options BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE to another patch.
3. remove scritps about emmc and xspi.
4. remove xspi and emmc configuration.
5. add new option BR2_ROOTFS_OVERLAY for 10-network.rules.
6. modify u-boot environment scripts, remove all setting not used.
7. remove the scripts which is not used by default configuration.

changes since v2:
1. Modify the qoriq-cadence-dp-firmware option in defconfig.
2. rename defconfig to nxp_ls1028*.
3. remove extra packages except busybox in defconfig.
4. modify the description of file genimage.xspi.cfg.template.

changes since v1:
1. add new option in configs/freescale_ls1028ardb-xxxx_defconfig.
---
 board/nxp/common/ls/busybox.config            |  9 ++
 board/nxp/ls1028ardb/genimage.sd.cfg.template | 52 ++++++++++++
 board/nxp/ls1028ardb/post-image.sh            | 57 +++++++++++++
 board/nxp/ls1028ardb/readme.txt               | 61 +++++++++++++
 .../etc/udev/rules.d/10-network.rules         | 16 ++++
 .../nxp/ls1028ardb/u-boot-environment-sd.txt  | 13 +++
 configs/nxp_ls1028ardb-64b_defconfig          | 85 +++++++++++++++++++
 7 files changed, 293 insertions(+)
 create mode 100644 board/nxp/common/ls/busybox.config
 create mode 100644 board/nxp/ls1028ardb/genimage.sd.cfg.template
 create mode 100755 board/nxp/ls1028ardb/post-image.sh
 create mode 100644 board/nxp/ls1028ardb/readme.txt
 create mode 100644 board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules
 create mode 100644 board/nxp/ls1028ardb/u-boot-environment-sd.txt
 create mode 100644 configs/nxp_ls1028ardb-64b_defconfig

diff --git a/board/nxp/common/ls/busybox.config b/board/nxp/common/ls/busybox.config
new file mode 100644
index 0000000000..7074c65aa6
--- /dev/null
+++ b/board/nxp/common/ls/busybox.config
@@ -0,0 +1,9 @@
+#
+# Additional Busybox Settings
+#
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_FEATURE_DF_FANCY=y
+CONFIG_FEATURE_SEAMLESS_GZ=y
+CONFIG_FEATURE_SEAMLESS_BZ2=y
+CONFIG_FEATURE_SEAMLESS_XZ=y
diff --git a/board/nxp/ls1028ardb/genimage.sd.cfg.template b/board/nxp/ls1028ardb/genimage.sd.cfg.template
new file mode 100644
index 0000000000..ab50e103c1
--- /dev/null
+++ b/board/nxp/ls1028ardb/genimage.sd.cfg.template
@@ -0,0 +1,52 @@
+# Minimal SD card image for the NXP boards Template
+#
+# SD card image (sdcard.img) format:
+# * the SD card must have 4 kB free space at the beginning,
+# * U-Boot is dumped as is,
+# * a FAT partition at offset 64 MB is containing Image and DTB files
+# * a single root filesystem partition is required (ext2, ext3 or ext4)
+#
+
+image boot.vfat {
+  vfat {
+    files = {
+      %FILES%
+    }
+  }
+  size = 256M
+}
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition rcw {
+    in-partition-table = "no"
+    image = "bl2_sd.pbl"
+    offset = 4096
+  }
+
+  partition u-boot {
+    in-partition-table = "no"
+    image = "fip.bin"
+    offset = 1M
+  }
+
+  partition u-boot-environment {
+    in-partition-table = "no"
+    image = "uboot-env.bin"
+    offset = 5M
+  }
+
+  partition boot {
+    partition-type = 0xC
+    bootable = "true"
+    image = "boot.vfat"
+    offset = 64M
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext2"
+  }
+}
diff --git a/board/nxp/ls1028ardb/post-image.sh b/board/nxp/ls1028ardb/post-image.sh
new file mode 100755
index 0000000000..c655074386
--- /dev/null
+++ b/board/nxp/ls1028ardb/post-image.sh
@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+# args from BR2_ROOTFS_POST_SCRIPT_ARGS
+# $2 linux building directory
+# $3 buildroot top directory
+# $4 u-boot building directory
+
+#
+# dtb_list extracts the list of DTB files from BR2_LINUX_KERNEL_INTREE_DTS_NAME
+# in ${BR_CONFIG}, then prints the corresponding list of file names for the
+# genimage configuration file
+#
+dtb_file()
+{
+	local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
+
+	for dt in $DTB_LIST; do
+		echo -n "\"`basename $dt`.dtb\", "
+	done
+}
+
+#
+# genimage.sd.cfg.template: Boot from SD
+# genimage.emmc.cfg.template: Boot from eMMC
+#
+genimage_type()
+{
+	if grep -Eq "^BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE=\"emmc\"$" ${BR2_CONFIG}; then
+		echo "genimage.emmc.cfg.template"
+	elif grep -Eq "^BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE=\"sd\"$" ${BR2_CONFIG}; then
+		echo "genimage.sd.cfg.template"
+	fi
+}
+
+main()
+{
+	local FILES="$(dtb_file) "ls1028a-dp-fw.bin", "Image""
+	local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
+	local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+	sed -e "s/%FILES%/${FILES}/" \
+		board/nxp/ls1028ardb/$(genimage_type) > ${GENIMAGE_CFG}
+
+	rm -rf "${GENIMAGE_TMP}"
+
+	genimage \
+		--rootpath "${TARGET_DIR}" \
+		--tmppath "${GENIMAGE_TMP}" \
+		--inputpath "${BINARIES_DIR}" \
+		--outputpath "${BINARIES_DIR}" \
+		--config "${GENIMAGE_CFG}"
+
+	rm -f ${GENIMAGE_CFG}
+
+	exit $?
+}
+
+main $@
diff --git a/board/nxp/ls1028ardb/readme.txt b/board/nxp/ls1028ardb/readme.txt
new file mode 100644
index 0000000000..713babd7c3
--- /dev/null
+++ b/board/nxp/ls1028ardb/readme.txt
@@ -0,0 +1,61 @@
+LS1028ARDB board is one platform based on LS1028A silicon for industry,
+which is supported in LSDK-19.09.
+
+One simple image file is created by buildroot, which includes RCW, uboot,
+Linux kernel, rootfs and other necessary binaries for this board.
+
+To program the image file created by buildroot into the flash.
+There are two way to do it:
+
+1. Program the image file on PC machine for SD card boot
+  $ sudo dd if=./output/images/sdcard.img of=/dev/sdx
+  # or in some other host machine:
+  $ sudo dd if=./output/images/sdcard.img of=/dev/mmcblkx
+
+  # find the right SD Card device name in your host machine and replace the
+  # “sdx” or “mmcblkx”.
+
+2. Program the image file on board for eMMC and XSPI boot
+Make sure your board has ipaddr, netmask, and serverip defined to reach your
+tftp server.
+
+  2.1 Program eMMC boot image file to eMMC chip
+    # Make sure output/images/sdcard.img is stored to tftp server
+    # Below command is one example
+    => tftpboot 0xa0000000 sdcard.img
+    => mmc dev 1
+    => mmc erase 0 0x200000
+    => mmc write 0xa0000000 0 0x200000
+
+    # The size "0x200000" will be changed when the image size is different.
+
+  2.2 Program XSPI boot image file to flash
+    # Make sure output/images/xspi.cpio.img is stored to tftp server
+    # Below command is one example
+    => tftpboot 0xa0000000 xspi.cpio.img
+    => sf probe
+    => sf erase 0 $filesize
+    => sf write 0xa0000000 0 $filesize
+
+3. Booting your new system
+Before booting the new system, we should make sure the switch setting is right.
+below switch setting is for each booting mode:
+    +-----------+---------------------+
+    |Boot mode  | Switch setting      |
+    +---------------------------------+
+    |SD boot    | SW2[1~4] = 0b’1000  |
+    +---------------------------------+
+    |eMMC boot  | SW2[1~4] = 0b’1001  |
+    +---------------------------------+
+    |XSPI boot  | SW2[1~4] = 0b’1111  |
+    +-----------+---------------------+
+
+or we use following command to reset the board in uboot prompt:
+  # boot from SD card
+  => qixis_reset sd
+
+  # boot from eMMC chip
+  => qixis_reset emmc
+
+  # boot from XSPI
+  => qixis_reset qspi
diff --git a/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules b/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules
new file mode 100644
index 0000000000..19f41634bd
--- /dev/null
+++ b/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules
@@ -0,0 +1,16 @@
+# ENETC rules
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.0", DRIVERS=="fsl_enetc", NAME:="eno0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.1", DRIVERS=="fsl_enetc", NAME:="eno1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.2", DRIVERS=="fsl_enetc", NAME:="eno2"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.6", DRIVERS=="fsl_enetc", NAME:="eno3"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.0", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.1", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.2", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.3", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf1"
+# LS1028 switch rules
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p0", NAME="swp0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p1", NAME="swp1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p2", NAME="swp2"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p3", NAME="swp3"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p4", NAME="swp4"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p5", NAME="swp5"
diff --git a/board/nxp/ls1028ardb/u-boot-environment-sd.txt b/board/nxp/ls1028ardb/u-boot-environment-sd.txt
new file mode 100644
index 0000000000..f91e6b585f
--- /dev/null
+++ b/board/nxp/ls1028ardb/u-boot-environment-sd.txt
@@ -0,0 +1,13 @@
+baudrate=115200
+bootcmd=setenv bootargs root=/dev/mmcblk0p2 rootwait rw earlycon=uart8250,0x21c0500 console=ttyS0,115200 cma=256M video=1920x1080-32 at 60;mmcinfo;fatload mmc 0:1 ${dp_load} ${dp_file}; hdp load ${dp_load} ${dp_offset};fatload mmc 0:1 ${loadaddr} ${bootfile};fatload mmc 0:1 ${fdtaddr} ${fdtfile};booti ${loadaddr} - ${fdtaddr}
+bootdelay=3
+bootfile=Image
+fdtfile=fsl-ls1028a-rdb.dtb
+loadaddr=0xa0000000
+fdtaddr=0xb0000000
+dp_file=ls1028a-dp-fw.bin
+dp_load=0x90000000
+dp_offset=0x2000
+stderr=serial
+stdin=serial
+stdout=serial
diff --git a/configs/nxp_ls1028ardb-64b_defconfig b/configs/nxp_ls1028ardb-64b_defconfig
new file mode 100644
index 0000000000..cb0131a35c
--- /dev/null
+++ b/configs/nxp_ls1028ardb-64b_defconfig
@@ -0,0 +1,85 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+
+# Hostname and issue
+BR2_TARGET_GENERIC_HOSTNAME="LS1028ARDB"
+
+# toolchain
+BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
+BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc"
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="ls1028ardb_tfa"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_FORMAT_BIN=n
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-dtb.bin"
+BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE=y
+BR2_TARGET_UBOOT_ENVIMAGE=y
+BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/nxp/ls1028ardb/u-boot-environment-sd.txt"
+BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/linux"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219-V4.19"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# required tools to create the microSD image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nxp/ls1028ardb/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="$(LINUX_DIR) $(TOPDIR) $(UBOOT_DIR)"
+
+# busybox setting
+BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/nxp/common/ls/busybox.config"
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+
+# packages for rcw
+BR2_PACKAGE_HOST_QORIQ_RCW=y
+BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE="sd"
+BR2_PACKAGE_HOST_QORIQ_RCW_BIN="ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin"
+
+#Display port firmware
+BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y
+
+#eudev support
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_ROOTFS_OVERLAY="board/nxp/ls1028ardb/rootfs_overlay"
+
+# Arm-Trusted-Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-dtb.bin"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/atf"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="pbl"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES="host-qoriq-rcw"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd RCW=$(BINARIES_DIR)/rcw_1300_sdboot.bin"
-- 
2.17.1



More information about the buildroot mailing list