[Buildroot] [PATCH v2 1/3] board: add Beelink GS1 support

Clément Péron peron.clem at gmail.com
Sun Nov 24 22:40:39 UTC 2019


Hi Peter,

On Sun, 24 Nov 2019 at 09:44, Peter Korsgaard <peter at korsgaard.com> wrote:
>
> >>>>> "Clément" == Clément Péron <peron.clem at gmail.com> writes:
>
>  > Signed-off-by: Clément Péron <peron.clem at gmail.com>
>  > ---
>
>  > Changes since v1:
>  >  - Add myself to DEVELOPPERS file
>  >  - Add U-boot and Linux version
>
>  > ATF patch is merged in v2.2 but tag is not pushed on github
>
> I do see it now:
>
> https://github.com/ARM-software/arm-trusted-firmware/tree/v2.2
>
> So it would be good to send an update to move it to 2.2 after you have
> tested.

OK I will,

>
>  > U-Boot patch is accepted upstream will be available in 2020.01
>
>  >  DEVELOPERS                                    |   4 +
>  >  board/beelink/gs1/extlinux.conf               |   4 +
>  >  board/beelink/gs1/genimage.cfg                |  33 +++
>  >  ...er-common-use-r_wdog-instead-of-wdog.patch |  39 +++
>  >  ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ++++++++++++++++++
>  >  board/beelink/gs1/post-build.sh               |   4 +
>  >  configs/beelink_gs1_defconfig                 |  39 +++
>
> A board/beelink/gs1/readme.txt with some basic information about how to
> use this would be nice. Care to send a followup patch with that?

Ok,

Regards,
Clement

>
>  > +++ b/configs/beelink_gs1_defconfig
>  > @@ -0,0 +1,39 @@
>  > +# Architecture
>  > +BR2_aarch64=y
>  > +BR2_ARM_FPU_VFPV4=y
>  > +BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
>  > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
>  > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
>  > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
>  > +BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
>  > +
>  > +# Kernel Linux headers same as kernel, a 5.3 series
>  > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
>  > +BR2_LINUX_KERNEL=y
>  > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
>
> This still uses the default kernel version which will change over
> time. I added:
>
> BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.12"
>
> To explicitly use 5.3.12 and committed to next, thanks!
>
> --
> Bye, Peter Korsgaard


More information about the buildroot mailing list